Pomocuty K18 Anti Spy Hidden Camera Detector
With German advanced technology and digital receiving mode, the K18 detector can detect car trackers, wireless pinhole cameras, cell phone undercover software, an instrument for Casino scams, etc. Preventing you and your family from the damage of electromagnetic radiation.
Difference from other brands:
- Digital receiving mode can expand the detection frequency and avoid the disturbance from the clutter signal of life.
- With German advanced technology, no matter how weak the signal transmission is, this detector can easily locate it by adjusting the power switch.
- K18 can accurately identify the CDMA signals, which are difficult to detect, because it is a code division wireless frequency hopping technology invented by the US Military.
Product description:
On the top left is the antenna, in the middle is the GS probe, and on the top right is the switch. The charging port and indicator are on the right side. In the front, there are the signal indicator, M button, and Lightning button. The M button is used for alarm mode. The lightning button is an LED laser switch, used for detecting hidden cameras, via viewing from the red window. MS is the mode indicator, GS is the magnetic indicator.
Operation Instruction:
Detecting camera lens steps:
- Turn the switch clockwise; you will feel a slight vibration. MS indicator is on, the signal and laser indicators will light up and then go out.
- Press the lightning button (the LED lights on the back will start flashing) and then watch through the red window. If you can see the red spot in the red window and it’s shining, it means that this device has detected a camera.
Kindly Remind:
- Long-press the “Lightning” button every two seconds, the LED flicker frequency will speed up a level, it has 4 levels to adapt to all kinds of people’s needs.
- Short-press once to turn on or off the Laser scanning.
Detecting Radio Frequency Steps:
- Turn the switch clockwise; you will feel a slight vibration. MS indicator is on, the signal and laser indicators will light up and then go out.
- Continue to rotate clockwise until the switch stops (necessary steps for initializing detectors). You will hear this device beeping, and the signal indicator is on.
- Then turn the switch counter-clockwise until the signal indicator flashes, and then you can use this detector to detect RF signals.
Kindly Remind:
- If you don’t want to hear the sound, you can change the alarm mode to vibration by pressing the “M” button once.
- If you want to detect the magnetic devices, just long-press the “M” button for 3 seconds, and you can see that the GS indicator is on, then you can use this to detect magnetic devices.
Detecting Magnetic Devices Steps:
- Turn the switch clockwise. You will feel a slight vibration. MS indicator is on, the signal and laser indicators will light up and then go out.
- Continue to rotate clockwise until the switch stops (necessary steps for initializing detectors). You will hear this device beeping, and the signal indicator is on.
- Then turn the switch counter-clockwise until the signal indicator flashes.
- Long-press the “M” button for 3 seconds. You can see the GS indicator is on, then you can use this to detect magnetic devices.
Kindly remind:
If you don’t want to hear the sound, you can change the alarm mode to vibration by pressing the “M” button once.
Car Tracker Detection Instructions:
Magnetic positioner, a bugging device used for cars, the adsorption position is not visible at the car or hidden inside the car due to the installation of magnetic devices away from the metal surface, and the car has a certain space isolation. It is not recommended to directly detect the magnetic field outside the car. It is recommended to detect in the car, at the bottom of the car, or open the front and rear covers of the car, in the vicinity of the magnetic probe for detection, the cell grid closed detection, you can easily find strong magnetic adsorption equipment.
Features:
- Set if professional radio wave detection, magnetic field detection, hidden wired or wireless camera equipment detection, and multi-function detection as one of the professional senior detectors.
- With high sensitivity, a wide adjustable range, wide detection frequency.
- Simple operation, easy to carry, sound and light vibration alarm function.
- Can detect mobile, Unicom, Telecom 2G.3G.4G band mobile phones SIM card bug, GPS locator.
- Can detect the standby state magnetic locator, bug. LED laser technology can detect the standby state of the wireless or wired camera equipment.
Technique Data:
- Frequency Range: 1MHZ-8000MHZ
- Detection Dynamic Range: >73DB
- Detection Sensitivity: ≤0.03mv (the main band)
- Detection Range:
- 2.4G: 10 square meters (standard 10mw)
- 1.2G: 15 square meters (standard 10mw)
- Mobile band 2G.3G.4G signal: 15 square meters
- 10 digital tube, buzzer, vibrator instructions
- Power: Built-in 3.7V 1000mAh polymer lithium battery, full charge time: 2.5h
- Working Current: 60-110mA, continuous working time: 4-5h
- Materials: ABS plus Metal
- Weight: 150g
- Item Dimensions: 117*56*20mm
Application:
- Check whether your car or office has a wireless eavesdropping device, wireless eavesdropping device or not.
- Detecting whether the mobile phone has been eavesdropped on or is abnormal (sends the signal when there is no reason for standby).
- Detect whether your car is equipped with a GPS tracking, GPS location tracker.
- Detect your work environment and residential buildings with roof-based station radiation.
- Detect SMS sending and receiving signals, mobile Internet signals, mobile phone switches, and call signals.
- Detecting wireless network signals, cell phone base station signals, and wireless field strength motion systems.
- Detecting whether electromagnetic radiation from the human body, such as microwave oven, leaks.
- Detect if they live in a strong radiation environment known as the “mobile killer”.
- Detect if the situation is a suspicious live radio signal.
- Detect more hidden video 5.8GHz wireless camera, wireless eavesdropping device, wireless monitoring signal.
- Check the hotel, bathroom, entertainment, locker room, and anti-wireless pinhole camera.
- Eavesdropping on business negotiations, examiner sites, factories, military installations, or government agencies.
- Anti-wireless in cinemas, concerts, art galleries, or museums at ATM machines.
Package Details:
- 1 x K18 Detector
- 1 x Antenna
- 1 x Magnetic field probe
- 1 x Charger
- 1 x Manual
Note: Please use the original charger fully charged before use.
For More Blogs, Visit ManualsLibraryy.
Pomocuty K18 Anti Spy Hidden Camera Detector-FAQs
Q1. How does the Pomocuty K18 anti-spy detector work?
The K18 uses RF (radio frequency) scanning to detect wireless signals from hidden cameras or listening devices. It alerts you with sound, vibration, or light when it picks up a suspicious signal.
Q2. Can it detect all types of hidden cameras?
No detector can guarantee 100% detection. However, the K18 is effective in finding most wireless cameras, GPS trackers, and bugging devices that emit radio signals.
Q3. How do I use the K18 detector properly?
Turn on the device, adjust sensitivity, and slowly scan your surroundings. When the device detects a signal, follow the sound or light intensity to locate the hidden camera or listening device.
Q4. Can I find hidden cameras with my smartphone instead?
Yes, smartphones can sometimes detect infrared lights or signals, but they are not as reliable as a dedicated detector like the K18.
Q5. Do hidden cameras work without Wi-Fi?
Yes. Some spy cameras record footage internally on memory cards or connect through wired systems, so Wi-Fi is not always required.
Q6. What frequency ranges does the K18 scan?
The detector can scan common surveillance frequencies, including 700 MHz, 900 MHz, 2.4 GHz, and 5 GHz bands used by many wireless devices.
Q7. Can a mobile phone detect hidden listening devices?
Certain apps and phone features may help detect anomalies, but for reliable detection, the K18 RF detector is more effective.
Q8. Do hidden cameras make noise?
Some emit faint clicking or buzzing sounds, but many are silent. Using a detector is a safer method to confirm their presence.
Q9. How can I check if there’s a hidden camera in my room?
Turn off the lights, use a flashlight or your phone camera to look for small reflections, scan the Wi-Fi network, and use the K18 to sweep the area.
Q10. What do hidden cameras usually look like?
They are often disguised as everyday objects like smoke detectors, USB chargers, alarm clocks, or even wall outlets.