QCY T32 AilyBuds Clear Wireless Earbuds
Overview
Note: The images in this manual are for reference only and may vary from the actual product. Please refer to the actual product for accuracy.
Bluetooth Pairing
Initial Pairing:
- Take out both earbuds, peel off the isolation film from each, and place them back into the charging case. Close the lid to activate the new device.
- Retrieve both earbuds again.
- Refresh your phone’s Bluetooth devices, pair with QCY AilyBuds Clear, and complete the setup.
- Opening the charging case turns on the earbuds. If not, try again after charging.
- Opening the charging case turns on the earbuds. If not, try again after charging.
One-Click Device Switching:
(This step switches from Device A to Device B.) Open the lid, keep both earbuds in the charging case, and press the case button for about 3 seconds. The white light on the secondary earbud is always on, and the white light on the main earbud flashes. At this time, the earbuds enter device pairing mode. Search for QCY AilyBuds Clear on the Device B and click to connect.
Factory Reset
Clearing Pairing Records (Use in case of connection issues) Place the earbuds in the charging case, open the lid, and press the charging case button for 10 seconds. The earbuds will flash red 5 times, indicating the reset is complete after the blinking stops. After the factory reset, follow the initial pairing method to connect for normal usage.
User Guide
- Properly wear the earbuds on both the left and right sides. After wearing them, you can make slight adjustments by rotating to find a personally comfortable and secure position.
- Ensure the microphone opening is facing downward towards the mouth.
- Incorrect earbud placement may affect both calls and hearing to varying degrees.
Earbuds Charging
The red light stays on during charging, and the white light turns on for 30 seconds after a full charge.
Charging Case Charging
- During charging: The red light stays on. Fully charged: The white light stays on.
Charging Case Battery Status
- Sufficient battery: When the charging case is opened, the white light stays on for 5 seconds before turning off.
- Low battery: When the charging case is opened, the red light stays on for 5 seconds before turning off.
Functions
Power On: Open the charging case (earbuds inside) or, if the earbuds are outside the case, long-press the touch panel for 1.5 seconds.
Power Off: Place the earbuds into the charging case and close the lid.
Answer/End Call: Double-tap the touch panel.
Reject Call: Long-press the touch panel for 1.5 seconds.- V Play/Pause: Double-tap the touch panel.
44 Previous Track: Long-press the left ear touch panel for 1.5 seconds.
Next Track: Long-press the right ear touch panel for 1.5 seconds.
Voice Assistant: Triple-tap the left ear touch panel.- Low Latency: Triple-tap the right ear touch panel.
-
Volume +: Single-tap the right ear touch panel. - Volume: Single-tap the left ear touch panel.
Photography: Activate the camera on your phone, and tap the touch panel of the left/right earbud to take photos.
Power On: Open the charging case (earbuds inside) or, if the earbuds are outside the case, long-press the touch panel for 1.5 seconds.
Power Off: Place the earbuds into the charging case and close the lid.
Answer/End Call: Double-tap the touch panel.
Reject Call: Long-press the touch panel for 1.5 seconds.
V Play/Pause: Double-tap the touch panel.
44 Previous Track: Long-press the left ear touch panel for 1.5 seconds.
Next Track: Long-press the right ear touch panel for 1.5 seconds.
Voice Assistant: Triple-tap the left ear touch panel.
Low Latency: Triple-tap the right ear touch panel.
Volume +: Single-tap the right ear touch panel.
Volume: Single-tap the left ear touch panel.
Photography: Activate the camera on your phone, and tap the touch panel of the left/right earbud to take photos.Warranty
Your QCY product purchase is covered by a one-year limited manufacturer’s warranty from the date of delivery. Please ensure you retain your purchase receipt. If any defects occur due to quality issues within the warranty period, kindly bring both the warranty card and the purchase receipt to the authorized dealer for complimentary replacement services.
The manufacturer’s warranty is void under the following circumstances, but not limited to:
- Improper or inadequate maintenance or modification.
- Accident, misuse, abuse, contamination, or other external causes.
- The use of unspecified adapters and accessories.
- Malfunctions or damages resulting from natural disasters, earthquakes, lightning, abnormal voltage, or environmental factors.
- Damages that occur as a result of one’s failure to follow the instructions.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Safety Precautions
- Please carefully read and retain this user manual before using the product.
- If the product is not used for an extended period (more than 2 weeks), please recharge it.
- You must choose a charger produced by a legitimate manufacturer and certified by the national safety authority.
- If your phone cannot detect the Bluetooth earbuds, either re-enter pairing mode or perform a factory reset on the Bluetooth earbuds. If there is a phone program error, close and reopen Bluetooth on the phone or restart the phone.
- Do not disassemble or modify the battery, insert foreign objects, expose it to high temperatures, or immerse it in water or other liquids to prevent battery leakage, overheating, ignition, or explosion. Battery replacement should only be done by the manufacturer.
- Do not drop, crush, or puncture the battery. Prevent external pressure that may lead to internal short circuits and overheating.
- Do not dismantle or modify the earbuds for any reason, as it may result in fire, electronic breakdown, or permanent damage to the product.
- Do not expose the product to extremely low or high temperatures (below 0°C or above 45°C).
- Do not use the product indicator light near the eyes of children or animals.
- Do not use the product during thunderstorms, as it may cause abnormal operation and increase the risk of electric shock.
- Do not use oil or other volatile liquids to clean the product.
Please do not use this device for long periods of time and at high volume, as there is a risk of hearing damage.
Please do not use this device for long periods of time and at high volume, as there is a risk of hearing damage.Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: No. 325 Yuehui Rd. Daojiao Town, Dongguan City, Guangdong Province, China
Notice:
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
For More Manuals By QCY, Visit ManualsLibraryy.
QCY T32 AilyBuds Clear Wireless Earbuds -FAQs
What are the QCY T32 AilyBuds Clear Wireless Earbuds?
The QCY T32 AilyBuds Clear Wireless Earbuds are budget-friendly true wireless earbuds designed for everyday music, calls, and casual use. They feature a transparent, capsule-style charging case and connect via Bluetooth 5.3 for stable performance. These earbuds focus on delivering good sound quality, clear calling, and modern design at an affordable price, making them a popular option for users looking for stylish yet functional wireless earbuds.
What features do the QCY T32 AilyBuds Clear offer?
The QCY T32 earbuds come with Bluetooth 5.3 connectivity, quad microphones with environmental noise cancellation, and a 13mm titanium-coated driver for enhanced sound output. They also include customizable EQ settings through the app and touch controls for easy operation. These features combine to provide a balanced experience for music listening, calls, and general everyday usage without needing premium-priced earbuds.
How is the sound quality of the QCY T32 AilyBuds Clear?
The QCY T32 earbuds deliver solid sound quality for their price, thanks to the 13mm drivers that produce clear mids and decent bass. They are tuned to handle various music genres, and users can adjust audio profiles through the companion app. While they may not match high-end earbuds, they offer a well-balanced listening experience suitable for casual users, streaming, and everyday entertainment.
Do the QCY T32 AilyBuds Clear have noise cancellation?
The QCY T32 does not include active noise cancellation for music, but it features ENC (Environmental Noise Cancellation) for calls. This uses four microphones to reduce background noise and improve voice clarity during phone calls. It is especially useful in outdoor environments, helping to minimize wind and surrounding noise so your voice remains clear to the person on the other end.
How long is the battery life of the QCY T32 earbuds?
The QCY T32 earbuds offer up to around 5 hours of playback on a single charge, while the charging case extends total battery life to approximately 22.5 hours. They also support fast charging, allowing users to get about an hour of listening time with just a short charging session. This makes them reliable for daily use without frequent recharging interruptions.
Are the QCY T32 AilyBuds comfortable to wear?
The QCY T32 earbuds feature a semi-in-ear design that sits comfortably in the ear without creating too much pressure. Each earbud is lightweight, around 4 grams, making them suitable for long listening sessions. This design is especially beneficial for users who find traditional in-ear earbuds uncomfortable, offering a more relaxed and breathable fit for extended daily use.
Are the QCY T32 AilyBuds Clear waterproof?
The QCY T32 earbuds come with an IPX5 water resistance rating, meaning they can handle sweat and light splashes. This makes them suitable for workouts, outdoor activities, and everyday use in light rain. However, they are not designed for swimming or heavy water exposure, so users should avoid submerging them in water to ensure long-term durability.
Do the QCY T32 earbuds support gaming or low latency?
Yes, the QCY T32 earbuds offer relatively low latency, making them suitable for casual gaming and video streaming. With Bluetooth 5.3 and latency as low as around 68ms, audio stays fairly synchronized with visuals. While they are not specifically designed as gaming earbuds, they still provide a smooth experience for watching videos or playing mobile games without noticeable lag.
Can the QCY T32 AilyBuds Clear be used with Android and iPhone?
The QCY T32 earbuds are compatible with both Android and iOS devices. They connect easily via Bluetooth and work with the QCY mobile app, allowing users to customize EQ settings, control features, and monitor usage. This cross-platform compatibility makes them a versatile choice for a wide range of smartphone users.
Are the QCY T32 AilyBuds Clear worth buying?
The QCY T32 AilyBuds Clear are a strong budget option for users looking for stylish earbuds with reliable performance. They offer good sound quality, clear calling with ENC, and a modern, transparent design at an affordable price point. While they lack premium features like active noise cancellation, they provide excellent value for everyday listening, making them a worthwhile choice for budget-conscious buyers.