QFX PBX-8008SM TWS Bluetooth Portable Speakers
TWS (TRUE WIRELESS STEREO) PARING 2 PBX-8008SM
- Step 1:
- Push the Mode button on both speakers until both speakers are in Bluetooth Mode. The display will show Bluetooth.
- Step 2: When both speakers are in Bluetooth Mode. Push and hold the TWS button on one of the speakers for seconds. You will hear a beep. The speakers will connect together. Next time you put both speakers in Bluetooth mode at the same time, they will connect automatically
- Step 3: On your Bluetooth settings on your device, find “QFX PBX-8008SM”. If your TWS speaker paring was successful you should only see one “QFX PBX-8008SM” to choose from. Select the “QFX PBX-8008SM”. Enjoy True Wireless Stereo (TWS) sound from your phone via Bluetooth
Control Panel Function
- Power/VOLUME -&+
- Charging Indicator RED=Charging Light off Fully Charged
- DC interface (5V)
- Next track
- Play/Pause&TWS (Wireless Bluetooth Connection: under Bluetooth mode, press the TWS button for around 3 seconds to pair another TWS speaker; Under FM mode, press Play/Pause&TWS to enter into automatic scan and all the scanned radio stations will be saved automatically.)
- Previous track
- MODE/LED ON(Long press to turn on/off light; Lightly press to enter into selection for Bluetooth, FM Radio, AUX Input, USB)
- USB input
- AUX input
- MIC input
SPECIFICATIONS
- Frequency Response for the main speaker: 68Hz-20KHz
- Power Supply: DC5V
- Maximum battery life based on minimum power and volume settings
POWER SOURCE
- Please charge the unit at least 4 hours before first use.
- Twist the dial clockwise/anticlockwise to switch on/off the unit.
CHARGE THE BATTERY
When the battery is charging, the CHARGE STATUS lights show on the LED display is red. After the battery has fully charged, the light turns off.
- Connect the USB charge cable to the DC5V interface of the speaker firmly.
- When the battery is fully charged, please disconnect the USB charging cable from the speaker.
- The speaker works normally when charging.
POWER/VOLUME
- Twist the dial clockwise/anticlockwise to increase/decrease the mus volume.
- PREVIOUS/NEXT BUTTON
- Under playing status, press the PREVIOUS/NEXT button to get back to the previous or next song.
- PAUSE/PLAY BUTTON
- To stop playing the current track, please press the PAUSE/PLAY button on the control panel. Press it once again to continue playing.
- MODE/LED ON
- Long press to turn on/off light.
- Lightly press to enter into playing mode selection(Bluetooth, FM Radio, AUX Input, USB).
AUX IN JACK
- Connect an audio cable to the AUX IN JACK of the speaker and to the audio output socket on the external audio devices such as MP3 player, Discman, etc, then
select LINE by pressing the MODE/LED ON button on the control panel. - Play from an external audio device.
MIC IN JACK
- Plug in the microphone directly for playing.
- USB JACK
- Insert a USB card directly for playing.
- FM FUNCTION
- Lightly press the MODE/LED ON button to switch to FM mode. Press the PLAY/PAUSE button on the control panel for automatic searching and saving of the radio stations, by pressing PREVIOUS or NEXT you can select a previous or next radio station.
- Bluetooth:
- Press the MODE/LED ON button on the control panel to select Bluetooth mode. Simultaneously open the Bluetooth setting on your phone, tablet, or any other
Bluetooth-enabled audio device and select “QFX PBX-8008SM”(no need to match code), the unit and device will then be connected via Bluetooth. Press the “NEXT SONG” and “PREVIOUS SONG” buttons on the control panel to select the song, and press the ” PLAY/PAUSE” button to control the playing status
For more manuals by QFX visit, ManualsLibraryy
QFX PBX-8008SM TWS Bluetooth Portable Speakers-FAQs
Can I pair two QFX speakers together?
Yes, you can pair two QFX speakers together using True Wireless Stereo (TWS) connectivity.
How do I sync my QFX PBX-800TWS speaker?
Select Bluetooth mode on your speaker, then search for “QFX PBX-800TWS” on your mobile device’s Bluetooth settings.
How do I connect both speakers at the same time?
To enter Party Mode, press and hold the volume and Bluetooth buttons on both speakers until you hear a voice prompt.
What is TWS mode?
TWS (True Wireless Stereo) allows you to pair two audio devices via Bluetooth, transmitting left and right channels separately.
What does TWS stand for in speakers?
TWS stands for True Wireless Stereo, using advanced sound technology to deliver audio over Bluetooth.
What is the warranty on QFX speakers?
QFX speakers are warranted to be free of defects in material and workmanship for one (1) year from the date of purchase.
Can I pair my Bluetooth speaker to my TV?
Yes, you can pair your Bluetooth speaker to your TV by selecting Bluetooth settings on your TV and adding your speaker as a device.
How do I connect my TWS speakers?
Connect to your TWS speaker through your phone’s Bluetooth settings, then pair the two speakers together.
Can Bluetooth connect to multiple devices?
Yes, some devices allow multiple Bluetooth connections, and you can seamlessly switch between devices.