Skullcandy Push Active In-Ear Wireless Earbuds
User Guide
- Register Your Product Skullcandy.com/ product-registration/push
- Secure in Ear with FitFin™
- Auto Power-On
- Auto Power-Off
- Charge Case
- Charge Earbuds
- Pairing Mode Left Side 01 Off Mode
- Pair New Device “Push”
- Power – On/Off Left Side 01
- Volume Up Right Side 02
- Volume Down Left Side 01
- Play/Pause Left 01 or Right 02 Side
- Track Forward Right Side 02
- Track Back Left Side 01
- Answer/End Left 01 or Right 02 Side
- Activate Voice Assistant Left 01 or Right 02 Side
Questions Visit:www.skullcandy.com
ISED Statement
This device contains a license-exempt transmitter receiver that complies with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
ISEC RF Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
For More Manuals By Skullcandy, Visit ManualsLibraryy.
Skullcandy Push Active In-Ear Wireless Earbuds-FAQs
Q1. What are Skullcandy Push Active earbuds?
The Push Active are true wireless sport earbuds with flexible over-ear hooks, hands-free voice control, and sweat/water resistance, making them ideal for workouts and daily use.
Q2. How do I use Skullcandy Push Active earbuds?
Remove the earbuds from the case; they will turn on automatically.
Pair them via Bluetooth on your device.
Control music, calls, and settings with voice commands or by pressing the earbud buttons.
Place them back in the case to power off and recharge.
Q3. How do I turn on or off Skullcandy Push Active earbuds?
On: They power on automatically when removed from the case. You can also press the Skull logo for 1 second.
Off: Place them back in the case, and they shut down automatically.
Q4. How do I know if my Skullcandy earbuds are charging or fully charged?
While charging in the case: The LEDs show solid red.
Fully charged: The LEDs turn blue for 5 seconds.
Q5. How long does it take to charge Skullcandy Push Active earbuds?
It usually takes about 2 hours to fully charge the earbuds. Charging the case takes around 4.5 hours from 0% to 100%.
Q6. What is the battery life of Skullcandy Push Active?
They provide up to 44 hours of total listening time (earbuds + case). On a single charge, the earbuds last 10 hours, with the case adding another 34 hours.
Q7. Do Skullcandy earbuds charge while the case is charging?
Yes. The earbuds continue to charge while the case itself is plugged in.
Q8. Why is only one of my Skullcandy earbuds charging?
Check for:
Dust or debris blocking the charging pins.
Loose or misaligned ear gels.
A faulty USB-C cable or port.
Q9. Can I charge Skullcandy earbuds without the case?
No. The charging case is required to charge the earbuds.