Blog Post

TENMIYA A30 Portable Wireless Speaker-featured

TENMIYA A30 Portable Wireless Speaker User Manual

Blogs-logo

TENMIYA A30 Portable Wireless Speaker

TENMIYA A30 Portable Wireless Speaker-product

Package contents

  1. A30 speaker ……………..1PC
  2. User manual………………1PC
  3. 3.5mm Audio cable………..1PC
  4. USB charge cable………..1PC
  5. Remote control…………..1PC
  6. Stand holder………………1PC

Specifications

  • Output power: 40W
  • Frequency: 80Hz-20KHz
  • S/N ratio: ≥75db
  • Output Impedance: 4Q
  • Input voltage: DC 5V
  • Battery capacity: 8000mAh
  • Speaker driver size: 2.5″*2 woofer, 2.5″*2 tweeter
  • Product size: W115xD185xH230mm

Product Features

  1. Using the newest decoding chip, Bluetooth 5.0, connect quickly.
  2. 40W output power, portable 2.2 channel design, 4 speaker drivers, and outstanding surround sound.
  3. Support Bluetooth, Aux in, USB, TF card, FM radio, Recording, EQ, Remote, Microphone and soon.
  4. Five tuning controls: Volume, Bass, Treble, Mic echo, and Mic volume.
  5. Double power supply: DC 5V-1A charging & Built-in four rechargeable lithium battery.
  6. Compatible with personal computers, MP3, MP4, smartphones, and other smart Devices.
  7. Intelligently select an MP3/FM station by remote number keys.
  8. Can you remember the song number after turning off?
  9. The top of the A30 speaker has a stand holder that can support the standing of mobile phones, tablets, etc

Safety information

  1. Store the loudspeaker away from humid areas, high temperatures, oil, and other liquids.
  2. Do not expose the product to direct sunlight and rain.
  3. Set a suitable volume to avoid hearing impairment.
  4. If you do not use the product for a long time, charge it at least once per three months in order to avoid damage to the lithium battery.
  5. It is forbidden to disassemble, repair or open the product.
  6. When charging, please keep away from the reach of children to avoid electric shock or suffocation.

Function Operational Specification

TENMIYA A30 Portable Wireless Speaker 1

  1. Knobs Control: Normal adjust is the main volume control. Light press operation order is :
    1. Tap once: Woofer volume adjustment ( shown b ),
    2. Double tap: Tweeter volume adjustment ( shown t ),
    3. Triple tap: mic Echo adjustment ( shown e),
    4. Tap four times: mic volume adjustment (shown n ), fast choose light press operation is pressed, the response times according to the menu order .( Remarks: It will automatically back to the main volume adjustment if no operation is performed within 4 seconds, whatever function it is in
  2. Previous song: In USB /TF status, short press is previous song, long press is fast return. In Bluetooth mode, a short press is the previous song. In FM mode, a short press is the previous radio station, long press is the human-made search previous radio station.
  3. Pause button: In Blue/USB/TF/FM/LINE mode, short press is mute or playing pause (FM/AUX/USB/REC mode pause will be shown as PAUS ). In FM, long-press is automatically the FM channel and memory. In BLUE, long-press to disconnect Bluetooth. In USB /TF, long-press is to play a recording. Lights turn on/off: double-click the pause button or remote control (double-click the pause button)
  4. Next song: In USB /TF status, short press is next song, long press is fast forward. In Bluetooth mode, a short press is next song. In FM mode, short press is the next radio station, long press is human-made search next radio station.
  5. EQ key: Short press is Outdoor and indoor, these two effects, long press is mic priority.
  6. Mode key: Short press is conversion now mode, press can choose BLUE /TF/USB/ LINE /FM mode, long press is to remove the original voice.
  7. REC key: Short press to enter into recording function, short press again is to play the recording, long press is to delete the recording.
  8. Microphone jack
  9. Hard disk: insert the USB with music inside, and you can play the music in MP3, WAV formats
  10. TF card socket: insert the TF card with music inside, and can play the music in MP3, WAV formats
  11. AUX input jack .
  12. Power switch, pull on is turn on, pull off is turn off .
  13. Charging LED light indicator: It is always red when charging; the red light will be off after fully charged.
  14. DC 5V charging jack.

Bluetooth mode

Turn on the speaker and open the hands of the Bluetooth Settings (Mobile phone brand different, Bluetooth opening method will be different), into search, the A30 will be found, and please connect it. When the Bluetooth pairing is successful, you can play the music on your phone. In case of unsuccessful pairing, turn off the speaker and restart it. After successfully connecting to Bluetooth, if you turn off the device, but the Bluetooth on your smartphone remains open, when you restart the device, the Bluetooth will be connected automatically. When the speaker Bluetooth is connected to the Bluetooth of your mobile phone, if you want to connect the Bluetooth of another mobile phone, you must first press andTENMIYA A30 Portable Wireless Speaker User Manual | ManualsLibraryyhold the MI button to disconnect the Bluetooth connection of your mobile phone, or you can directly disconnect your mobile phone’s Bluetooth, and then pair the Bluetooth on the other mobile phone.

FM radio mode

To activate radio FM mode, turn on the A30 speaker, use the Mode button to select FM or press the FM button on the remote control. To search for available radio stations automatically, click and hold MI, and FM Stations will be saved automatically. To switch stations, clickTENMIYA A30 Portable Wireless Speaker User Manual | ManualsLibraryyor click the number keys on the remote control; each number key will save the corresponding FM radio station. To start searching radio stations manually, please use the number on the remote to enter the station number you need. For example, if you want to search for the “90.5” radio station, you can directly press the number 905 on the remote control to go to 9the 0.5 radio station.

AUX/Linein mode

Turn on the A30 speaker, select AUX mode, can use the AUX cable to connect your MP3 or computer to the speaker, and then play your music.

Play by TF cards or USB flash

Turn on the A30 speaker and insert your TF card/USB flash to automatically switch to TF/USB mode, and play the music from the TF card/USB flash. After pulling out, if you re-insert the TF card/USB flash, the speaker will start playing from the previous breakpoint.

Recording mode

In TF / USB mode, you click REC to enter the recording mode, and then you must use the microphone to record. Press REC again to end the recording and play the recording. The recording will be saved on a TF card or a USB flash memory. long-press REC to delete the current recording.

Charging

To charge the battery, insert the Micro USB charge cable into the speaker port, then connect the USB port to a DC 5V charger, and plug the charger into an AC 220V power source. Charge the speaker the same as you charge your phone. Charging LED light indicator: It is always red when charging; the red light will be off after fully charged.

Solutions To Common Problems

TENMIYA A30 Portable Wireless Speaker 2

Remote Control

TENMIYA A30 Portable Wireless Speaker 3

  1. Standby
  2. Mode key: Short press is conversion now mode, press can choose BLUE /TF/USB/ LINE /FM mode, long press is to remove the original voice.
  3. EQ key: Five sound effects. ‘pop’ means “Popular Music’, ‘roc’ means ‘Rock Music’, ‘JAZ’ means Jazz Music, ‘CLA’ means ‘Classical Music’, ‘cut’ means ‘Country Music, ‘nor” means ‘Normal Music’long press is microphone priority.
  4. Number key: In the USB / TF mode, press the number to select the song you want to play in the USB flash memory / TF card; in the FM radio mode, press the number 905 to go to 090.5″ radio station, you can freely choose the M radio frequency you want.
  5. Microphone Volume Tuning
  6. Treble Tuning
  7. Bass Tuning
  8. Increase volume
  9. Previous song: In USB /TF status, short press is previous song, long press is fast return. In Bluetooth mode, a short press is the previous song. In FM mode, short press is the previous radio station, long press is the human-made search previous radio station.
  10. Decrease volume
  11. Next song: In USB /TF status, short press is next song, long press is fast forward. In Bluetooth mode, a short press is next song. In FM mode, short press is the next radio station, long press is human-made search next radio station.
  12. Pause button: In Blue/USB/TF/FM/LINE mode, short press is mute or playing pause (FM/AUX/USB/REC mode pause will be shown as PAUS ). In FM, long pressing automatically FM channel and memory. In BLUE, long-press is to disconnect Bluetooth. In USB /TF, long-press is to play a recording. Lights turn on/off: double-click the pause button or remote control (double-click the pause button)
  13. Microphone Echo Tuning
  14. Aux Mode: Use the AUX cable to connect to TV, MP3, computer, mobile phone, iPad, iPod, etc.
  15. FM Mode: To search radio stations manually, please use the number on the remote to enter the station number you need.
  16. REC key: Short press to enter into recording function, short press again is to play the recording, long press is to delete the recording.
  17. Bluetooth ModeThank you again for purchasing the A30 speaker. If you have any questions, please contact us. Hope our products can get your love and recommendation. Best wishes to you I wish every happiness will always be with you!

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements.

For more manuals by Blogs, visit ManualsLibraryy

TENMIYA A30 Portable Wireless Speaker-FAQs

 

How do I charge the TENMIYA A30 portable speaker?

To charge your TENMIYA A30, connect the micro USB charging cable to the speaker’s charging port and plug the other end into a 5V DC power adapter (like a phone charger). Then, plug the adapter into a wall socket. The charging indicator will light up while charging and turn off when the battery is full.

How long does it take to fully charge the speaker?

The TENMIYA A30 usually takes about 3 to 4 hours to reach a full charge, depending on battery level and power source.

How do I connect my phone to the TENMIYA A30 via Bluetooth?

Turn on the speaker and enable Bluetooth mode. On your phone, open Bluetooth settings and search for available devices. Select “TENMIYA A30” from the list to pair. Once connected, you can start playing music wirelessly.

How can I tell if my TENMIYA speaker is fully charged?

Most TENMIYA speakers have an LED light that changes color or turns off when the battery is fully charged. Refer to the indicator light on your speaker for confirmation.

Can I charge my TENMIYA A30 using my phone charger?

Yes. You can safely use your phone charger (5V output) with the USB cable provided. Avoid using high-voltage fast chargers to protect the battery.

How can I connect the TENMIYA A30 without Bluetooth?

If Bluetooth is unavailable, you can use an AUX cable, USB drive, or TF card (microSD card) to play music directly from your device.

How do I turn off or change the LED lights on the TENMIYA A30?

Press the “Light” or “Mode” button on the speaker to switch between lighting modes or turn the lights off completely, depending on your preference.

How do I know when the battery is low?

When the battery is running low, the speaker may give a voice prompt, the music might distort, or the LED indicator will flash red. Recharge immediately to continue using it smoothly.

Can I use the TENMIYA A30 while it’s charging?

Yes, you can play music while charging the speaker, but charging time may increase slightly when used simultaneously.

Leave a comment

Your email address will not be published. Required fields are marked *