Tribit Stormbox 2 Portable Bluetooth Speaker User Guide

Tribit Stormbox 2 Portable Bluetooth Speaker

Hereby, Thousandshores Deutschland GmbH declares that the radio equipment type Portable Wireless Speaker BTS32 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://files.tribit.com/BTS32-eu-doc.pdf.

To Charging The Speaker

• When the power is lower than 20%, the red light blinks.
• When charging, the red light is always on.
• When fully charged (about 4 hours), the red light turns off.

Power On/Off

• Short-press the power button once to turn on/off the power.
• The speaker will automatically shut down when there is no audio input or operation for 15 minutes.

Pairing

• Short-press the Bluetooth button once to enter pairing mode.
• Long-press the Bluetooth button 2S to disconnect the Bluetooth connection.
• The speaker can be connected to up to two Bluetooth devices at the same time.

Controls

• x1: Press once
• x2: Press twice
• x3: Press three times
• 2s: Press and hold for 2 seconds
• Reset: Press and hold the +- button at the same time for 5s

XBass Button

• Press the EQ button to switch the music mode.
• The white light is always on for XBass mode.
• The light is off for XBass.

Stereo Mode

1. First, connect speaker A to Bluetooth on your phone, and then press the TWS button.
2. Ensure that speaker B is not connected to any device, and then press the TWS button.
3. Both speakers broadcast their voices at the same time, indicating that the TWS is successful and speaker A is the host.

Party Mode

• Two speakers already in stereo mode, press any speaker TWS button;
• Hear the voice announcement, indicating the switch to party mode.
• Long-press any speaker TWS button 2S to disconnect the group.

TRIBIT APP

Download the TRIBIT app to adjust the EQ settings, upgrade the firmware, and explore more features.

Safety Precautions

• Do not place the speaker in a place where it is easy to fall.
• Do not disassemble, repair, or modify this product by yourself.
• Keep the speaker away from extreme temperatures.
• Do not use the speaker in an outdoor thunderstorm environment.
• Do not use any corrosive cleaners or other chemical solutions to clean the speaker.
• 12-month warranty.

Specifications

• Bluetooth Version: V6.3
• Output Power: 2°T7W
• Bluetooth Protocol: A2DP, AVRCPHFPHSP
• Frequency Response Range: 70~20KHZ
• Frequency Band Range: 2402-2480MHz
• Maximum Transmission Power: <6dBm
• Battery: 2600mMAh*2
• Play Time: 24 hours(At 60% volume with XBass off)
• Charging Time: About 4 hours
• Waterproofing Grade: 1PX7
• Size: 180mm x 69mm x 69mm
• Weight: 580g

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These mits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions.

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

IC Caution

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

For More Manuals By Tribit, Visit ManualsLibraryy.