Tzumi SoundBoost Compact Wireless Bluetooth Speaker
Small Size, Big Sound
Bring the party anywhere you go with the Tzumi SoundBoost Speaker. This wireless mini speaker features multiple ports for playing music and a convenient handle to help carry it with you wherever you go. Easy on-device controls, Bluetooth connectivity, and LED RGB lights make it so you can play music and set the vibe in seconds. Get more from your speaker with the Tzumi SoundBoost!
- Compatible with Bluetooth, AUX, USB, and TF/Micro-SD.
- Wireless music playback with clear bass and high-quality audio.
- A convenient handle makes for easy transportation.
What’s Included?
- SoundBoost Speaker
- Micro-USB Charging Cable
- User Guide
Button Diagram
Instructions Setup
- Slide the power switch to turn the SoundBoost ON.
- a. When first powered on, the SoundBoost defaults to Bluetooth Mode, indicated by a voice prompt. All Other play modes will change automatically when connected to the different audio sources.
- Open the Bluetooth settings on the device you wish to connect to the SoundBoost.
- a. Search and select ‘Tzumi SoundBoost’, and follow on-screen instructions to pair.
- Once your device is connected, browse your music library, and select a song to start playing music through your SoundBoost!
- TO turn the SoundBoost OFF, slide the power switch to the OFF position.
Music Control
- Mode Button
- a. Press to switch between Bluetooth, USB, MicroSD, and AUX modes.
- Previous/V- Butto
- a. Press to switch to the previous song.
- b. Press and hold to lower the volume.
- Play/Pause Button
- a. Play or pause your music.
- Next/V+ Button
- a. Press to switch to the next song.
- b. Press and hold to raise the volume.
MicroSD Card Mode
- Insert a MicroSD in the TF card and insert tie SaundBoost.
- The SoundBoost will automatically search and play the music stored on the MicroSD card.
- Use the music control buttons on the SoundBocst to play, pause, and skip audio on the MicroSD card.
USB Mode
- Insert a USB flash drive into the USB port on the SoundBoost.
- The SoundBoost will automatically search and play the music stored on the USB.
AUX Mode
- Plug either end Of a 3.5mm AUX cable into the AUX port on the SoundBoost.
- Plug the Other end Of the 3.5mm AUX cable into the AUX port Of your device.
- The SoundBoost will automatically switch to AUX mode.
- a. The prompt “AUX input mode” will notify you it is ready to play.
- Music can only be controlled via your device in this mode.
Charging
- When the battery is low, the SoundBoost will notify you with a “Battery low” prompt.
- Plug the Micro-USB end Of the charging cable into the charging port on the SoundBoost.
- Plug the USB end of the charging cable into a USB power source, the speaker will begin to charge, and a red LEO indicator light located behind the
/V+ button will light up.
- The red indicator light will turn Off when the SoundBoost is finished charging.
Specifications
Warnings
- Do not listen to high volume sound for a prolonged time to avoid hearing damage.
- Handle with care and avoid dropping.
- Do not place heavy objects on the item.
- Keep away from children.
- Keep away from liquids. Do not operate the SoundBoostif it has been exposed to liquids.
- Do not operate the SoundBoost with wet hands.
FCC Warning
Any changes or modifications not expressed and approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 1 5 of the FCC Rules and Industry Canada license-exempt RSS standard (s). Operation is subject to the following two conditions:
- This device does not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
For more manuals by Tzumi visit, ManualsLibraryy
Tzumi SoundBoost Compact Wireless Bluetooth Speaker-FAQs
How do I connect the Tzumi Bluetooth speaker?
Enable Bluetooth on your phone and search for nearby devices. Once you see “Tzumi – AquaBoostBoom” in the list, select it to connect. Your speaker will be ready to use.
How do I charge my Tzumi speaker?
Plug the Micro-USB end of the charging cable into the speaker’s charging port, and the USB end into a power source. The speaker will begin charging, and a red LED will light up to indicate charging.
Is the AquaBoost Boom waterproof?
Yes, the AquaBoost Boom is IP68 certified, making it waterproof and shock-proof, with a durable silicone exterior. It works with Bluetooth V4.2 technology and has a wireless range of up to 33 feet.
How do I know if my speaker is fully charged?
Many Bluetooth speakers have indicator lights that show the battery level. A green light typically indicates a full charge, while a red light suggests low battery.
How do I use a Tzumi charger?
For the fastest charge, remove any case or attachments. Plug the USB end of the Micro-USB cable into an AC wall charger, and the Micro-USB end into the charging port of the Wireless Charging Pad. Place the pad on a flat, sturdy surface.
How do I turn off the lights on the Tzumi speaker?
Press and hold the PLAY/PAUSE button to search for stations. To turn the speaker lights on or off, press and hold the mode/light button.
Do Bluetooth speakers work without internet?
Yes, Bluetooth speakers do not require an internet connection to function. They connect directly to your device via Bluetooth, making them portable and convenient.
How do I enable Bluetooth?
On Android, swipe down the Quick Settings menu and tap the Bluetooth icon, or go to “Settings > Bluetooth” to turn it on. If Bluetooth isn’t working, try restarting your device or updating it.
What is pairing mode?
Pairing mode is the process where Bluetooth devices register each other to establish a wireless connection. Both devices must be in pairing mode to connect.