VEHO STIX True Wireless Earphones Complete
Parts and Names
- STIX earphones
- MFB smart touch
- LED indicators
- USB-C charging cable
- Earbuds
How to Charge
Charging the case
The LED indicator on the case will flash white when charging, turning solid white once fully charged. Each LED represents 25% of the charge.
Charging the earphones
The LED indicator on the earphones will turn white when charging and turn off automatically once fully charged. When the battery is low, the STIX will beep and the LED will flash orange.
Pairing
STIX automatically pair with each other when switched on. The LEDs flash white when pairing. Once successfully paired, the right earphone LED will flash between white and orange.
Pairing with a device
On your device select ‘Veho STIX’ from the Bluetooth® menu, you will hear a success tone when pairing is successful.
Controls
Power
Touch and hold each STIX for 3 seconds to turn on. You will hear a tone when the earphones switch on. Touch and hold for 5 seconds to turn off.
Play/Pause
Tap either STIX once to play, tap once again to pause.
Skipping tracks
Tap and hold the right STIX for 2 seconds to skip to the next track. Tap and hold the left STIX for 2 seconds to skip to the previous track.
Answering calls
Tap the right STIX once to answer a call, tap once again to end the call.
Rejecting calls
Tap and hold the right STIX for 2 seconds.
Triggering Siri or Google Assistant
Double-tap either of the earphones.
Coloured identity dots
If you have more than one pair of STIX at home, use the coloured dots to label the STIX charging case for easy identification.
Support
In the event, you need to contact Veho for support or troubleshooting for your STIX earphones, visit our website at veho-world.com and use our pop-up chat box.
Specifications
- Speaker: 6mm
- Frequency: 20Hz-20kHz
- Earphone battery: 40mAh
- Charging case battery: 420mAh
- Play time: Up to 4 hours
- Talk time: Up to 5 hours
- Charging time (earphones): Up to 1.5 hours
- Charging time (charging case): Up to 2 hours
- Bluetooth version: v 5.0
- Wireless working range: 10M (without obstacles)
- Input voltage/current: DC 5V/1A
- Water resistant: IPX5
IMPORTANT: Only use the charging cable supplied with the STIX earphones and carry case to charge the STIX, ensure you use a compatible power source.
For more Manuals by VEHO, visit ManualsLibraryy
VEHO STIX True Wireless Earphones Complete-FAQs
How do I turn on and use the Veho STIX earphones?
Touch and hold each earbud for 3 seconds to power on. Tap either earbud once to play or pause music. To turn off, touch and hold for 5 seconds.
Why aren’t my Veho STIX charging?
Make sure the contact strips are removed, the charging case is powered, and the earbuds are properly seated. Also, check the USB cable or try a different one.
How do I pair my Veho Bluetooth speaker or earphones?
For earphones, hold the power button for about 10 seconds until the LED blinks—this means it’s in pairing mode. For speakers, press and hold the mode buttons on both units for 8 seconds, then select the speaker from your device’s Bluetooth list.
How do I know if my earbuds are in pairing mode?
When the LED on the earbuds starts blinking, it means they’re ready to pair with a device.
How can I keep my earbuds in pairing mode?
Turn off the earbuds, then press and hold the power button for about 10 seconds until the light flashes. This will keep them in pairing mode long enough to connect.
How do I know when my STIX earbuds are fully charged?
When placed correctly in the case, the case lights up blue and the earbuds glow red. Once fully charged (after about 1 hour), all LEDs will turn off.
What’s the difference between wireless and true wireless earbuds?
Wireless earbuds still have a wire between them, while true wireless earbuds like STIX have no cables at all, using Bluetooth for both audio and connectivity between the buds.
Why do my earbuds start charging then stop?
This is often caused by dirty charging contacts. Clean the metal pins on both the earbuds and case, which may have buildup from sweat, oil, or earwax.
How can I tell if the STIX battery is charging?
When plugged into a USB port, a light will turn on. The LED will go off once the STIX is fully charged.