WantJoin Professional Blender User Manual

WantJoin Professional Blender

HOW TO USE

Load softer, water-dense ingredients on the bottom, and ice or frozen ingredients on
top. This creates a vortex in the pitcher that leads to a smoother breakdown of frozen ingredients.

FUNCTION FEATURES

CLEANING AND MAINTENANCE

Cleaning Tips

1. Use the 【Pluse】button/plastic knife to clean/blend with water in the cup。
2. Never use your hand to clean the cup without taking off the blade。
3. Never put the blender cup to wash in the dishwasher.
4. Use a sponge or dry towel to clean the base.
5. Never immerse in water to avoid machine.
6. Only use a plunger and soap water to clean the cup.

Machine Maintenance

1. Place the cup upside down to let the water flow out.
2. Wash properly to avoid moulding
3. Never blend without things or grind things to break the blade
4. Must cool down the machine after working for some time.

WARNING

Please follow and read carefully the following safety notice before using the product:

1. NEVER unplug by grasping and pulling the flexible cord after using the machine.
2. Wash all parts that may contact with food before use. Please follow the washing instructions in the manual.
3. DO NOT submerge the appliance or place the power cord near any liquid.
4. Keep the appliance and its cord out of reach of children.
5. DO NOT allow the cord to hang over the edges of tables or counters avoid damage.
6. DO NOT allow the unit or cords to contact hot surfaces to avoid damage
7. CLEAN the device before each use using the product.
8. ALWAYS use the appliance on a clean, dry, level surface.
9. DO NOT operate the appliance with an empty container.
10. DO NOT fill containers past the max fill or max liquid lines.
11. DO NOT microwave any containers or accessories with the package.
12. ENSURE all utensils are removed from containers.to avoid damage or harm.
13. NEVER operate the appliance without lids and caps in place.
14. DO NOT attempt to defeat the interlock mechanism and install the container and
    lid properly.
15. NEVER leave the appliance unattended while in use.
16. The thermal switch will activate and lb reset. Unplug the appliance and allow it to
    cool for 15 minutes before using it again.

TROUBLESHOOTING

FOR MORE MANUALS BY WANTJOIN, VISIT MANUALSLIBRARYY

WantJoin Professional Blender-FAQs