Wasserstein Smart Water Temperature Humidity Sensor
In the Box
1 x water sensor
1 x probe cable
1 x holder
1 x micro USB cable
2 x AA batteries
2 x screws
2 x wall anchors
Parts
Setup
- Mount the holder to the wall. Place one screw through the front and mount it accordingly
Click the water sensor onto the holder.
- Plug the probe cable into the cable port located on the water sensor
Plug the USB cable into the USB port.
Note: to use AA batteries instead of a USB cable, twist the back of the water sensor counterclockwise until it pops off. Then, insert two AA batteries
- Test the water sensor by placing the probe in a small puddle of water. If the water sensor has been installed correctly, it will beep when it touches water
Click the water sensor onto the holder.
Plug the USB cable into the USB port.
Note: to use AA batteries instead of a USB cable, twist the back of the water sensor counterclockwise until it pops off. Then, insert two AA batteries
Resetting the Device
- Twist the back of your sensor counterclockwise until it pops off.
- Reset the device by pressing and holding the button until the blue LED begins flashing.
App Setup
Minimum requirements:
- Smartphone or tablet running iOS 9.0 or later / Android 5.0 or later.
- 2.4 GHz WiFi Network (not compatible with 5 GHz connections).
- Upload speed of at least 2 Mbps
- Download the App by scanning the QR code or by searching “Wasserstein App”
- Sign up for a new account or log in to an existing account.
- Click “Add Device” or “+” in the top right corner. Then, select “Add Manually” or “Auto Scan.
To use Auto Scan, please enable Bluetooth on your mobile device.
You can control the settings of your Smart Water Sensor, including the alarm and low battery mode, as well as view your device record.
Specifications
- Power: 2 x AA batteries / Micro USB
- Operating voltage: 5 V
- Wireless type: 2.4 GHz
- Wireless range: 147.6 ft
- Size: 2.8 x 2.8 x 1.3 in (with holder)
FOR MORE MANUALS BY WASSERSTEIN HOME, VISIT MANUALSLIBRARYY