Aqara T2 Dual Relay Module
Warnings
- This product is NOT a toy. Please keep children away from this product.
- This product is designed for indoor use only. Do NOT use in humid environments or outdoors.
- Beware of moisture; do NOT spill water or other liquids onto the product.
- Do NOT place this product near a heat source. Do NOT place it in an enclosure unless there is normal ventilation.
- Do NOT attempt to repair this product by yourself. All repairs should be performed by an authorized professional.
- This product is only suitable for improving the entertainment, convenience of your home life and reminding you about the device status. It should NOT be used as security equipment for a home, building, warehouse, or any other place. If a user violates the product use instructions, the manufacturer will NOT be liable for any risks and property losses.
- Please do not overload it. Please make sure that the 10A over-current protection circuit breaker on the front end of this product works normally before it powers on. Recommended stripping length for terminal wiring: 6~8 mm.
- After the device powers on, all the conductors (including the antenna) of the device may be connected to strong electricity. Please make sure that the product is firmly installed in a protective environment that cannot be reached by hands, such as the switch pattress and protective and protective cover of the bulb.
Product Introduction
Aqara Dual Relay Module T2 is a relay control module based on the Zigbee wireless communication protocol, designed to control the power on and off of devices. This product can switch between dry/wet contact modes using a connecting wire, thereby controlling other dry contact devices such as motors and garage doors. App remote control, timing control, power statistics, and other functions can be achieved through an Aqara hub. It is also compatible with HomeKit, allowing for quick control via the Home app. This product needs to be used with a device that Zigbee 3.0 hub function. Some features require the support of specific model hubs.
Press and Hold for 5 S: Reset 3 Times of Quick Press: Verification of Effective Communication Distance. Do not press the button hard with tools, as this may cause damage to it.
Device Binding & Initialization
- Download the Aqara Home app. Search for “Aqara Home” in the Apple App Store, Google Play, Xiaomi GetApps, Huawei App Gallery, or scan the following QR code to download the Aqara Home app:
- Add the product to the Aqara Home app. Please open the Aqara Home app, tap “Home”, and then tap “+” in the top-right corner to enter the “Add Device (Accessory)” page, select “Dual Relay Module T2”, and add it according to instructions in the Aqara Home app. After a successful connection, the status indicator of the device will turn blue and flash 2 times slowly.
- For details, please see www.aqara.com/support or scan the QR code below to get the detailed electronic manual.
Only the Aqara Home app supports this feature
Product Specifications
- Dual Relay Module T2
- Model: DCM-K01
- Wireless Protocols: Zigbee
- Dimensions: 45.5 × 48 × 24 mm (1.79 × 1.89 × 0.94 in.)
- Rated Parameters: 100 – 250 V~, 50/60Hz, μ/Max. 10A, Max 2500W ;
- Max.1A, Max 250W(LED, CFL ); Max 1A, Max 1/4 HP M.1 24 – 30 V : Max.10A, Max 300W(Resistive load); 30 – 60 V : Max.1A, Max 60W(Resistive load)
- Operating Temperature: -10°C ~ 40°C (14°F ~ 104°F)
- Operating Humidity: 0 ~ 95% RH, no condensation
- Zigbee Operation Frequency: 2405-2475 MHz
- Zigbee Maximum Output Power ≤ 13 dBm
- What is in the Box: Dual Relay Module T2 × 1, User Manual × 1, DIN Rail Accessory × 1, Jumper Wire × 1
FOR MORE MANUALS BY AQARA, VISIT MANUALSLIBRARYY