Intasting CEK-204 Gooseneck Electric kettle User Manual

Intasting CEK-204 Gooseneck Electric kettle

SPECIFICATIONS

If you have any questions or concerns regarding your new product, please reach out to us at [email protected]. We hope you enjoy your new product!

PACKAGE CONTENTS

• 1 x BARISTA KETTLE
• 1 x Power Base
• 1 x User Manual

GETTING TO KNOW YOUR BARISTA KETTLE

IMPORTANT SAFETY INFORMATION

IMPORTANT: Please read, understand, and comply with all of the instructions provided in this manual before using the device. Failure to comply with the instructions given in this manual or using the device not mentioned in this manual may cause serious personal injury or equipment damage.

General Safety

• DO NOT touch the base or the steel parts of the kettle while the appliance is operating or immediately after operation. These components will be hot and may cause burns or other personal injuries.
• DO NOT fill the kettle above the “MAX” line. Doing this may cause the water to boil over during operation and may result in scalding. The minimum amount of water needed for boiling is 0.5 L; too little water will result in the kettle switching off before the water has boiled.
• ALWAYS handle with care when there is hot water inside the kettle. Failure to do so may result in burns or scalding.
• Use the appliance with the specified voltage 120V 60Hz.
• DO NOT allow children to use or play with this appliance. Always keep this kettle and its components out of reach of children.
• DO NOT use the kettle if it is malfunctioning, if it is broken or chipped, or if the power cord or plug is damaged in any way. Stop using it and contact Customer Support immediately. (page 11)
• ALWAYS unplug the kettle when it is not being used. This will prevent moisture from causing a short circuit in the power base while it is plugged in.
  This appliance is for indoor use ONLY.

Use & Care

• ALWAYS place the kettle on a dry, flat surface.
• DO NOT place the kettle on or near heat sources such as stove tops, ovens, etc.
• DO NOT turn on the kettle while the lid is open.
• DO NOT cover the opening of the kettle while it is operating. Doing so may result in damage to the kettle.
• ALWAYS empty and clean the kettle after using it each time. If necessary, descale the kettle by following the instructions in Descaling the Kettle (page 10)
• DO NOT attempt to repair the kettle or its parts by yourself or through other third-party appliances when it is broken. Doing so may result in further damage or personal injury and will void your warranty.
• DO NOT dispose of this kettle in regular household waste.
• The kettle will be automatically shut off in 10 minutes once the setting program is completed.
• If the kettle has been taken away from the base, the system will keep the in-progress setting for 10 minutes.

BEFORE FIRST USE

1. Remove and safely discard any packaging material or promotional labels attached to your kettle.
2. It is recommended that filling the kettle to the maximum level with cold water before your first time, bring it to the boil by selecting the BOIL 212 °F, then discard the water.
3. Your kettle will only operate when positioned on the power base.

USING YOUR BARISTA KETTLE

1. Fill the kettle with water to a certain capacity, between the minimum and maximum water scale level lines.
2. Connect the power base wire to the power supply.
3. Short-press  button, “SET” icon will display.
4. Short-press button to select your preferred temperature measurement unit (°C/°F).
5. Spin the button to adjust the preset temperature for boiling water.
6. Short press button again to enter water boiling mode; the icon will flash on the screen.

FEATURED

Temp Set Memory

• The kettle will auto memorize the set temperature when the kettle leaves the power base. If exceed 10 mins, the kettle will be back on standby.
• If the power base is always plugged in, it will automatically memorize the last set boiling water temperature.

Temp Unit Switching

• Step 1: Short press button, “SET” icon is displayed, and the kettle enters standby mode.
• Step 2: Short press button to switch the temperature measurement unit. (°C/°F).
• F/C The default temperature unit setting is: °F

Keep Warm

• After the water is boiled, rotate the temperature knob to select the keep warm temperature and then press the keep warm button to enter the keep warm state.
• If the keep warm icon on the display flashes, the kettle is already in the keep warm state.
• When the temperature of the kettle is higher than the set insulation temperature, the kettle will not start heating.
• When the temperature of the kettle is lower than the set insulation temperature, the kettle will start to work until the temperature reaches the set insulation temperature and stops heating.
• The default keep warm time is 1 hour. After the kettle boils water, it will automatically enter the keep warm mode.
• The default temp of the keep warm setting is: 80°C/176°F
• If the keep warm icon on the display flashes, the kettle is already in the keep warm state.

Mute Function

• Long press button for 2s, and then the kettle enters silent mode. The ” will be displayed. HOLD ” icon.

Timer

• Step 1: Short press button, the “SET” icon is displayed, and the kettle enters standby mode.
• Step 2: Short-press will start. button, The kettle will start counting down for 3 seconds, and then the clock.
• Step 3: Press thebutton again during the timing process, the timer will be reset, and then start.

Add Water Reminder

• During the boiling water process, the water in the kettle dries up. It will display “ADD”.
• You must remove the kettle from the power base to add water. Then the kettle will dismiss the reminder. Then you can short press button to continue boiling water after adding water.

CLEANING AND STORAGE

Cleaning

• Before cleaning, be sure the base is unplugged and the kettle has cooled completely.
• Empty any remaining water from the kettle.
• Wash the inside of the kettle with soapy water and rinse. NEVER IMMERSE THE KETTLE IN WATER OR OTHER LIQUIDS.
• Do not place the kettle body into the dishwasher.
• Wipe the exterior of the kettle and base with a damp cloth or sponge and dry. Do not use abrasive soaps, cleansers, or scouring pads on any part of the kettle, as it may damage the finish.
• Over time, you need to regularly descale your kettle. Use a scale/lime remover and follow its manufacturer’s directions.

Storage

• Clean and dry all parts before storing. Store the kettle in its box or in a clean, dry place.
• Never wrap the power cord around the kettle.

Descaling the Kettle

You should descale the kettle at least once a week if you use it frequently. Descaling removes any mineral deposits that have built up inside the kettle. Always descale the kettle after it has been stored for long periods of time and before storing it.

1. Fill the kettle with 1 cup of distilled vinegar or lemon juice and 2 cups of water (1:2 ratio).
2. Boil the mixture, then let it soak in the kettle for 2 hours.
3. Pour out the solution, then wipe the limescale away with a cloth or nonabrasive sponge.
4. Rinse the kettle with clean water, and dry it with a soft cloth.
5. Repeat as needed.

TROUBLESHOOTING

WARRANTY

INTASTING provides a 24-month product warranty from the date of purchase for all our products. We will take care of all quality-related issues with a REPLACEMENT or FULL REFUND, including any return shipping costs. If your product is defective and under warranty, please contact us at Email: [email protected].Please carefully follow our warranty process to minimize any delays:

1. Note the product model name. It can be found on a sticker located underneath or on the back of the product.
2. Provide the order number for a purchase made through Amazon.

Typical turnaround time to address Warranty claims is 10 business days, depending on your geographical location and the type of damage or Warranty claim.

This warranty does not apply to the following:

• Damage due to abuse, accident, alteration, misuse, tampering, or vandalism.
• Improper or inadequate maintenance.
• Damage in the return transit.
• Unsupervised use by children under 18 years of age.

ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

CUSTOMER SUPPORT

Any issues or questions regarding your new product, please feel free to contact us. Please have your order number ready before contacting Customer Support

Email: [email protected]
Phone: +1 833 721 2799 (US) Mon-Fri 9 am – 5 pm (PST)
Website: Intasting.com

For More Manuals By Intasting, Visit ManualsLibraryy.

Intasting CEK-204 Gooseneck Electric Kettle- FAQs