Comcast Platco 2020 TV Remote Quick Start Manual

Comcast Platco 2020 TV Remote

CMF v2

1. IR Lens 6. App Buttons A
   • Color: Black Color: Black,
   • Material: Polycarbonate top-printed logo
   • Finish: Glossy (ref. Artwork v2)
   • Material: Rubber
2. Housing Finish: Smooth
   • Color: Black
   • Material: ABS 7. App Button B
   • Texture: VDI 3400 / 21-24 Color: Black, (ref. SKY’s EC202) top-printed logo (ref. Artwork v2)
3. Rubber Buttons Material: Rubber
   • Color: Black, top-printed icons ~~ Finish: Smooth (ref. Artwork v1)
   • Material: Rubber 8. App Button C
   • Finish: Smooth Color: Black, top-printed logo
4. Hard Cap Keys (ref. Artwork v2)
   • Color: Black, top-printed icons Material: Rubber
   • Material: ABS Finish: Smooth
   • Texture: VDI 3400 / 21-24 (ref. SKY’’s EC202) 9. App Button D
   • Color: Black,
5. Home and Voice Keys top-printed logo
   • Color: Clear, back-printed icons (ref. Artwork v2) (ref. Artwork v1) Material: Rubber
   • Material: PMMA Finish: Smooth
   • Finish: Polished
6. App Buttons A
   • Color: Black, top-printed logo (ref. Artwork v2)
   • Material: Rubber
   • Finish: Smooth
7. App Button B
   • Color: Black, top-printed logo (ref. Artwork v2)
   • Material: Rubber
   • Finish: Smooth
8. App Button C
   • Color: Black, top-printed logo (ref. Artwork v2)
   • Material: Rubber
   • Finish: Smooth
9. App Button D
   • Color: Black, top-printed logo (ref. Artwork v2)
   • Material: Rubber
   • Finish: Smooth

ACTIVATING RF

QuickSet

This product shall support the following features:

• Auto Setup
• Manual Setup
• Optimized Setup Maps (OSM)

The following are descriptions of the Quickset features:

• Auto Setup: Quickset allows for auto setup of the RCU by identifying devices connected through the HDMI network. The RCU is programmed automatically over the RF link.
• Manual Setup: Quickset allows for the manual selection of a Brand for the programming of devices without having to go through Auto Detection and Programming. The RCU is programmed automatically over the RF link.
• Optimized Setup Maps: OSM assists the user with a UI flow to program a TV or Audio device in the RCU. After the user selects a brand through the UI, the RCU software and Quickset allow the user to test functions. The RCU is programmed over the RF link after the user observes the appropriate feedback.

Pairing

• Press and hold DIGIT 1 + DIGIT 3 for 1 second
• Continuous GREEN led blink until paired or timed out

LED Feedback

• Pairing
  • GREEN LED blink every 250ms for the duration of advertising (10 seconds)
• Key Press
  • RED if not BLE bonded
  • GREEN if BLE bonded
• Factory Reset
  • 4 RED blinks before reboot
• Unbind BLE
  • 4 blinks if successful
  • 2 blinks if unsuccessful

Features:

• UE878NMEH (512K Flash/64K RAM)
• BLE
• Voice with single digital MEMs microphone
• QS Cloud
  • Same cloud Comcast accesses today, and implemented by Comcast
• Tri‐color (RGB) feedback LED for user feedback
  • The same tri‐color LED used in XR15 and XR16 remotes
  • Charge pump circuit to support blue color
• Option in battery compartment for 10-pin tag connection and 10-pin header
  • Follow the latest Sky EC302 design
• Buzzer/Piezo for Remote Finder feature (OWMB‐9045HS‐27‐16) – optional install
• SMT IR diode (Paralight L‐S15CAIR1C‐HD/ Bright LED Electronics Corp. BIR‐HMC33M‐2‐TRCA‐UEI)
• PCB: Double-Sided, CEM‐1, Carbon Thru Hole, Wet Film
• Rubber keypad with carbon ink
• ABS plastic housing
• PC IR lens
• PMMA back-printed crystal keys
  • MIC
  • HOME
• ABS keycap – OK key
• ABS keycaps
• Metal domes – all 30 keys
• 2 AAA batteries operation – designed for alkaline
• Operating Temperature
  • 0°C to +50°C

Customer Marking Label

COMPLIANCE WITH FCC RULES AND REGULATIONS

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase or decrease the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced remote control/ TV technician for help.

This equipment has been verified to comply with the limits for a Class B computing device, pursuant to FCC Rules. The user is cautioned that changes and modifications made to the equipment without the approval of the manufacturer could void the user’s authority to operate this equipment.

FCC Authorization Label

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Canada:

This device complies with RSS‐210 of the Industry Canada Rules:
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

For more manuals by Comcast, visit ManualsLibraryy

Comcast Platco 2020 TV Remote-FAQs