Pyle PLMR24 3-Way Weatherproof Outdoor Speaker
FEATURES:
- Dual Passive Speaker System
- Universal Indoor/Outdoor Mountable
- Marine Grade Construction
- Waterproof Rated & Weather-Resistant
- Connect & Stream Audio from External Devices
- 3-Way Full Range Stereo Sound Reproduction
- Bass Reflex Vent for Added Bass Response
- Built-in Capacitor Crossover Network
- Lightweight & Compact Size
- Removable Rustproof Mesh Grills
- Quick Connect/Disconnect Speaker Terminals
- Used for Home, Garage, Yard, Deck, Porch, Patio
TECHNICAL SPECS:
- Power: 200 Watt Peak (100 Watt RMS)
- Marine Grade Rating: IP-44
- Subwoofers: 3.5” Aluminum Injection Cones
- Midranges: 1.75” Wide Dispersion Cones
- Tweeters: 1.0” Superior Domes
- Construction Material: Engineered ABS
- Frequency Response: 70Hz – 21kHz
- Magnet Structure: 24 oz.
- Impedance: 4 Ohms
- Power Supply: 120V (DC 12V Power Adapter)
- Dimensions (L x W x H): 5.25’’ x 3.75’’ x 3.75’’ -Each
WHAT’S IN THE BOX:
- (2) Wall-Mount Speakers
- Speaker Wire, 11.5 ft.
- Removable Mounting Brackets
Installation Guide:
MOUNTING THE BRACKET
- Remove the bracket knobs and the bracket from the speaker
- Hold the bracket up to the mounting surface. “Plmr” can be mounted either horizontally or vertically. Hold the bracket so that the speaker wire fits through the large, circular wire hole in the bracket, align the bracket to be square with the surrounding (Use A level for accuracy)
- Mark the locations of the three shaped screw holes, use all of the holes
- Drill pilot holes into the mounting surface
- Gently pull the speaker wire through the wire hole in the center of the mounting bracket, and the bracket so that the hole lines up.
- Use your hardware to attach the bracket to the mounting surface
MOUNTING
FINAL ADJUSTMENTS
- After checking that the speaker is in-phase and works correctly, angle the speaker for the best sound
- Hand tighten the bracket knobs only, power tools may over-tighten the knob, and strip the threads of the insert.
- Check that the entire installation is safe and secure
FOR MORE MANUALS BY PYLE, VISIT MANUALSLIBRARYY
Pyle PLMR24 3-Way Weatherproof Outdoor Speaker- FAQs
How do I protect my Pyle outdoor speakers from weather damage?
Use weatherproof speaker covers to shield against rain, UV rays, and dust. This prevents fading and damage to the casing and grill.
What is the Bluetooth pairing password for Pyle speakers?
The default Bluetooth PIN is “0000” (four zeros).
How do I weatherproof speaker wire connections?
Use weatherproof wire nuts or silicone sealant on exposed connections.
Install connection boxes in dry areas for extra protection.
Do Pyle outdoor speakers need an amplifier?
Yes, unless they are active Bluetooth speakers (with built-in amplification). Most outdoor speakers require an external amplifier.
Should I cover my outdoor speakers when not in use?
Yes, covers help protect against rain, snow, and dust, extending speaker lifespan.
How do I reduce background noise in outdoor speakers?
Use high-pass/low-pass filters in audio settings.
Ensure proper wiring and grounding to avoid interference.
Does the Pyle PLMR24 support Bluetooth?
Yes, it has Bluetooth for wireless streaming from phones, tablets, and other devices.
How are outdoor speakers wired?
Connect positive (+) to positive and negative (-) to negative on the amplifier.
Most use spring terminals for easy wire clamping.
What do the numbers in speaker specs mean (e.g., 3-Way)?
First number: Normal-range speakers (e.g., 3 drivers for full-range sound).
Second number: Subwoofers (if any).
Third number: Height/tweeters (if any).
How far can I run outdoor speaker wire?
16AWG wire: Up to 48 ft (8-ohm) or 36 ft (6-ohm).
12AWG wire: Up to 200 ft (8-ohm) or 150 ft (6-ohm).