Polk Audio Monitor XT60 Tower Speaker
Adding Adhesive-Backed Rubber Feet
To keep your Polk speakers firmly in place and prevent damage to floors or furniture, it’s a smart idea to attach the included adhesive-backed rubber feet to the bottom of your speaker.
How to Connect Your System
To get the best sound quality, it’s important to wire your speakers correctly. How to Use Binding Post Connectors: Loosen the hex nut and insert bare speaker wire through the hole. Tighten the hex nut down to make the connection.
Note: Do not insert the insulated section of wire into the hole (you will not get a connection).
Basic Speaker Hookup
-Make sure that the red (+) and black (-) connectors on your amplifier or receiver connect to the red (+) and black (-) connectors on your speakers. If your speakers sound “thin,” with little bass and little or no center image, odds are that one of the speaker wires is connected backwards. Double-check all connections.
Speaker Positioning
To maximize the sound quality of your speaker system— whether you’ve purchased XT15 bookshelf speakers, an XT30 center channel speaker, or XT70 tower speakers—correct placement is everything. Take a look at the following examples and give them a try based on the Polk Monitor XT Series speakers you’ve purchased.
Note: Your Polk Monitor XT Series speakers are compatible with 2.0, 2.1, 3.1, 5.1, 7.1 and 9.1 setups (optional subwoofer shown in graphics).
Listening in 5.1 Surround
You can use the Polk Monitor XT Series speakers as rear surround speakers in a Polk Audio home theater system. Ideal rear channel surround speaker placement is on a side wall, slightly behind and above the listening position.
Listening in 3.1 System
Get the most realistic stereo image by placing speakers as far apart as the listeners are sitting from them. If room conditions require that you place the speakers farther apart, you may choose to angle the speakers toward the middle to support a more solid center image.
Listening in 5.1 Surround—alternate option
Alternate rear channel surround speaker placement for Polk Monitor XT Series speakers. If you cannot place rear surrounds on the side walls, position them on the rear wall above the listening position.
Listening in 7.1 Surround
Enjoy added depth to your surround sound experience with four rear surround speakers instead of two.
FOR MORE MANUALS BY POLK, VISIT MANUALSLIBRARYY
Polk Audio Monitor XT60 Tower Speaker- FAQs
What is the frequency response of the Polk Monitor XT60?
The Polk Monitor XT60 has a frequency response of 38Hz–40,000Hz, delivering deep bass and crisp highs.
What is the speaker’s sensitivity rating?
It has a sensitivity of 86dB, making it efficient and easy to drive with most amplifiers.
What is the impedance of the Polk Monitor XT60?
The speaker has an 8-ohm impedance, compatible with most home audio systems.
Can the Polk Monitor XT60 be wall-mounted?
Yes, it features a keyhole slot for easy wall mounting. Alternatively, you can use a 1/4″-20 threaded bracket for secure installation.
Are Polk Monitor XT60 speakers good for home theater?
Yes, they offer full-range sound and are ideal for entry-level home theaters or upgrading from bookshelf speakers.
How do I connect speaker wires to the Polk Monitor XT60?
Red terminal → Positive (+)
Black terminal → Negative (-)
Ensure the same polarity is maintained on both the speaker and amplifier.
Do Polk speakers support Bluetooth?
The Monitor XT60 is a passive speaker, so it requires an external amplifier or receiver. For wireless audio, consider Polk’s Bluetooth soundbars or active speakers.
What is Polk’s “Voice Adjust” technology?
This feature (available in select Polk models) enhances dialogue clarity for movies and TV shows.
Are Polk speakers waterproof?
No, the Monitor XT60 is for indoor use only. For outdoor setups, Polk offers weather-resistant speakers.
Where should I place the Polk Monitor XT60 for best sound?
Front left/right channels: Form a 22°–30° angle from the listening position.
Equal distance between speakers and seating area for balanced sound.