Pace Xi5 Streaming TV Box User Manual

Pace Xi5 Streaming TV Box

SAFETY INFORMATION

This digital set-top box has been manufactured and tested with your safety in mind. However, improper use can result in potential electric shock, property damage, or fire hazards. To avoid defeating the safeguards that have been built into your set-top box, please observe the precautions discussed in this document.

IMPORTANT SAFETY INSTRUCTIONS

Before you install or use the apparatus, you must read and understand these Important Safety Instructions. At all times when using the apparatus,,s you must follow these Important Safety Instructions to reduce the risk of fire, electrical shock, and injury to persons.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install according to the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades, with one wider than the other. Grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into the outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled, objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

In addition to the Important Safety Instructions, please read the Safety Information below.

Power sources

The model number, serial number, and electrical rating of this set-top box are on a label on its base.

You must operate your set-top box only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. If you move your set-top box between locations at different temperatures, allow it to reach room temperature before you apply power to it.

Overloading

Do not overload wall AC outlets, extension cords, or other power outlets, as this can result in a risk of fire or electric shock.

To avoid possible damage to your set-top box or to a connected TV or component, all AC power cords must be plugged into properly wired outlets. As with all electrical products, connection to faulty components or the failure to connect your set-top box to a properly wired outlet may cause sparking, property damage, or damage to any TV or other component connected to your set-top box and pose a fire hazard.

Lightning

For added protection for your set-top box during a lightning storm, or when it is left unattended and unused for long periods of time, disconnect your set-top box from the power supply and disconnect the cable system from your set-top box. See also item 13 in the Important Safety Instructions.

Ambient temperature

The operating temperature range of your set-top box is 32-104°F. If the ambient temperature around your set-top box falls outside this range, you must correct this in order for your set-top box to work correctly and safely. For example, if the temperature is too high, make sure there is sufficient ventilation (see below) and that your set-top box is not directly on top of or underneath other equipment.

Ventilation

Slots and openings in the casing of your set-top box are provided for ventilation, to ensure reliable operation of your set-top box and to protect it from overheating.

• Never block the ventilation openings by placing your set-top box on a bed, sofa, rug, or other similar surface. Place it on a hard, flat surface.
• Never cover the ventilation openings with items such as newspapers, tablecloths, or curtains.
• You can place your set-top box near other consumer electronics devices, such as stereo amplifiers or televisions, but you must not place it directly on top of or underneath them.
• Do not place your set-top box in a built-in installation such as a bookcase or rack unless proper ventilation is provided and you have adhered to the manufacturer’s instructions.
• Maintain a minimum distance of three inches around your set-top box for sufficient ventilation.

See also item 7 in the Important Safety Instructions.

Water and moisture

Do not expose your set-top box to rain or moisture, dripping or splashing, and ensure that no objects filled with liquids, such as vases, are placed on your set-top box. See also item 5 in the Important Safety Instructions.

Entry of objects and liquids

Never push objects of any kind into your set-top box through openings, as they may touch dangerous voltage points or short-out parts that could result in fire or electric shock. Never spill liquid of any kind on your set-top box.

Transporting

Move the combination of the set-top box and cart with care. Quick stops, excessive force, and uneven surfaces may cause the combination of the set-top box and cart to overturn. See also item 12 in the Important Safety Instructions.

Placement and mounting

Do not place your set-top box on an unstable or uneven surface. Your set-top box may fall, causing serious injury to a child or adult and serious damage to your set-top box. If you mount your set-top box, for example, to a wall or ceiling, follow the manufacturer’s instructions and use a mounting accessory recommended by the manufacturer. See also item 12 in the Important Safety Instructions.

Risk of fire or scorching

Never place naked flame sources, such as lighted candles, on or adjacent to your set-top box.

Replacement parts

When replacement parts are required, be sure that the service technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. See also item 14 in the Important Safety Instructions.

Safety check

Upon completion of any servicing or repairs to your set-top box, ask the service technician to perform safety checks to determine that your set-top box is in its proper operating condition. See also item 14 in the Important Safety Instructions.

SAVE THIS INFORMATION FOR FUTURE REFERENCE

REAR PANEL AND BASE

Rear panel

Base

FRONT PANEL AND TOP COVER

FRONT PANEL

TOP COVER

CONNECTING THE EQUIPMENT

Typical setup

A typical setup is shown on page 9. This shows a Pace Xi5 connected to a high-definition TV via an HDMI cable. You Xi5 receives content from your cable TV service provider via a WiFi connection to a 5 GHz wireless router (this connection can also be made using an Ethernet cable). See page 11 for more information on wireless connections.

Your equipment should have been connected up by your installer. However, if you need to disconnect and reconnect your equipment, read page 9. The setup shown on page 8 makes efficient use of the connectors on your set-top box. However, depending on your other equipment and the connectors on it, the person who installed your system may have chosen to connect things differently.

NOTES

For you to view programs broadcast in high definition, your set-top box must be connected to a suitable HDTV or computer monitor.
To connect your set-top box wirelessly to your cable TV service provider, your home must have a 5 GHz wireless router or access point that supports Wi-Fi Protected Setup (WPS) so that the set-top box can correctly associate with your wireless network. See page 11 for more information.

Your cable TV service provider determines the digital channels, services, and screen information that you see on your TV when you use your set-top box and its remote control.

Consult the information supplied by your cable service provider for details on how to make the most of the digital cable services. Also, read the operating instructions that are supplied with your remote control.

NOTE

Copy protection via an HDMI secure link.k

The HDMI link between your set-top box and your HDTV should be secure. When your set-top box is attached via an HDMI cable to an HDCP-compliant (High-bandwidth Digital Content Protection) HDTV, the HDTV and set-top box negotiate a secure link, which allows your set-top box to transmit full-resolution video (picture) to your HDTV.

Not all HDTVs support HDCP. If your set-top box is connected to an HDTV that does not support it, the HDMI output is then disabled, so no picture is transmitted from this connector.

WARNINGS

Do not connect your set-top box (or any other equipment such as a TV or DVD player) to the power supply until you have properly connected all the other cables.

Disconnect your set-top box’s power supply unit from the AC power supply before you disconnect any other equipment from its rear panel.

The only way to disconnect your set-top box from the AC power supply is to remove the power supply unit from the wall AC outlet (or switch the wall AC outlet switch, if present, to its OFF position). Your set-top box must therefore be installed near the wall AC outlet, which should be easily accessible.

Connecting your equipment

For further information, see page 8.

WARNINGS

Do not connect your set-top box (or any other equipment such as a TV or VCR) to the power supply until you have properly connected all the other cables.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades, with one wider than the other. Grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety.

Connecting the power supply unit to your set-top box

Before you insert the power supply unit into the wall AC outlet, connect the cord from the power supply unit to the socket labeled on your set-top box’s rear panel.

Connecting equipment to the wall AC outlets

Connect your set-top box’s power supply unit and the plugs on the power cords from your TV, DVD player, and any other equipment to AC outlets. If these outlets have switches, switch them ON.

Turning your set-top box on and off

After you have connected your set-top box’s power supply unit to the wall AC outlet (and switched this outlet ON, if it has a switch), your set‑top box powers up. The Power light on the set-top box’s top cover lights to show that your set-top box is fully on. Note: the light may flash while the set-top box powers up.

To turn your set-top box on or off at any time, press the Power button on your remote control.

Never turn off your set-top box by simply disconnecting it from the power supply. If you need to disconnect your set-top box, first turn it off by pressing the Power button on your remote control.

Lightning storms

Disconnect your set-top box’s power cord during lightning storms. A lightning storm may affect your set-top box if it is on during the storm. It may appear that it has stopped working, but you can easily restore its operation as follows:

Unplug your set-top box’s power supply unit from the wall AC outlet. Then plug this power supply unit in again at the wall AC outlet (and, if there is a switch by this outlet, switch it to its ON position).

Starting the WiFi connection

NOTE: Your home must have a 5 GHz wireless router or access point that supports Wi-Fi Protected Setup (WPS) so that the set-top box can correctly associate with your wireless network.

Consult the instructions for your wireless router or access point to find out what you need to do to initiate a WPS WiFi connection.

When you have activated the WPS system on your router or access point, press the WPS button on the base of your set-top box.

This automatically connects your set-top box to your wireless network using WPS.

Note: WPS will remain active for only a limited time to allow this pairing process; please consult the instructions for your wireless router or access point for information on the length of this limited time.

Regulatory information for WiFi

NOTE

Users should be advised that high-power radars are allocated as primary users (i.e., priority users) of the bands 5250-5350 MHz and 5470-5725 MHz and that these radars could cause interference and/or damage to the LE-LAN device.

The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

TERMS AND CONDITIONS FOR USE OF SOFTWARE (“TERMS”)

THE PRODUCT TO WHICH THESE TERMS RELATE (THE “PRODUCT”) INCORPORATES SOFTWARE WHICH IS OWNED BY PACE plc (“PACE”) OR ITS THIRD PARTY LICENSORS (THE “SOFTWARE”). BEFORE USING THE PRODUCT, PLEASE READ THESE TERMS. IF YOU DO NOT AGREE TO THESE TERMS, Y OU MAY NOT USE THE PRODUCT AND SHOULD IMMEDIATELY RETURN THE PRODUCT TO YOUR SUPPLIER. THESE TERMS ALSO APPLY TO ANY MODIFICATIONS, UPDATES, OR SUPPLEMENTS TO THE SOFTWARE PROVIDED TO YOU. FOR PURPOSES OF THESE TERMS, “YOU” MEANS YOU, THE END USER, AND YOUR PRODUCT SUPPLIER, UNLESS THE CONTEXT REQUIRES OTHERWISE.

A. License Grant and Conditions

1. Pace, or your supplier, if applicable, grants you a non-exclusive, non-transferable, limited license to use the Software solely as integrated with, incorporated into, or provided for use in connection with the Product.
2. Pace reserves all rights not expressly granted to you under these Terms.
3. You may not transfer any of your limited rights in the Software without the prior written consent of Pace, and if consent is provided, then the Software shall only be transferred in conjunction with the transfer of the Product AND ONLY IF the transferee has read and agreed to accept these Terms.
4. You must ensure that the copyright, trademark,, and other protective notices contained in the Software are maintained and not altered or removed.
5. The Software is protected by copyright and other, laws, and international copyright and other treaties.
6. The Software provided hereunder is licensed (not sold). Pace is NOT transferring title or any ownership rights in the Software to you.
7. All title and intellectual property rights in and to the Software and all modifications, updates, enhancements,, and derivative works of the Software are owned exclusively by Pace or its licensors, and you agree to execute any document reasonably requested by Pace to evidence such ownership rights.
8. Certain third-party software used in connection with the Product may be made directly available to you by the operating system or other third-party providers. Use of such Software is also subject to the terms of any applicable agreement between you and such third party.

B. License Restrictions

Except as expressly permitted herein or by statute, you may not use the Software in conjunction with any other hardware or equipment other than the Product;

1. copy or modify all or any portion of the Software;
2. incorporate all (or any portion of) the Software into other programs developed or used by (or on behalf of) you;
3. reverse engineer, decompile, decrypt, or disassemble the Software (or any portion of the Software); or
4. exptransferr ansf,  re-export,, or re-export the Software in violation of any applicable law.

C. Open Source Software

Certain components of the Software are subject to either:

1. the GNU General Public License (“GPL”);
2. the GNU Lesser General Public License (“LGPL”); or
3. OpenSSL license.
   The foregoing are not subject to the restrictions in Section B. In compliance with the GPL and L, GPL Pace makes the source code of the Linuxsoftware librariess and associated utilities it uses, together with its modifications (if any), available to the public in source code form at: http://www.pace.com/opensource/request.
   You are free to use, m, modify, and distribute the Linux software and any modifications as long as you comply with the terms of the GPL or LGPL referred to above. The License terms applicable to (i) to (iii) above are available to you, as explained in the section below entitled Open Source Licenses.
   The Software also contains the following:
4. SHA library Copyright © 2000-2001, Aaron D. Gifford.. All rights reserved.
5. Expat XML Parsing Library
   Copyright © 1998, 1999, 2000 Thai Open Source Software Centre Ltd and Clark Cooper.
   Copyright © 2001, 2002, 2003 Expat maintainers.
6. Expat++ This component of the Software is subject to the Mozilla Public License Version 1.0.
7. Base64 Algorithm Copyright © 2001 Bob Trower, Trantor Standard Systems Inc.
   Certain additional license terms applicable to (iv) to (vi) above are available to you, as explained in the section below entitled Open Source Licenses.

D. Termination

These Terms are effective until terminated. You may terminate these Terms by returning the Product to your supplier. These Terms will terminate automatically without notice if you fail to comply with these Terms or any other written agreement between you and Pace. Upon termination,n you must return the Product to your supplier.

E. Disclaimer

1. EXCEPT AS OUTLINED IN ANY WRITTEN AGREEMENT BETWEEN YOU AND PACE (OR YOUR SUPPLIER), THE SOFTWARE IS (TO THE EXTENT PERMITTED BY LAW) SUPPLIED “AS IS” AND PACE AND ITS LICENSORS EXPRESSLY EXCLUDE ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING (BUT NOT LIMITED TO) WARRANTIES OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR PURPOSE AND NON-INFRINGEMENT.
2. EXCEPT AS OUTLINED IN ANY WRITTEN AGREEMENT BETWEEN YOU AND PACE, IN NO CIRCUMSTANCE WILL PACE BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, PUNITIVE OR INCIDENTAL DAMAGE (INCLUDING LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF DATA OR THE COST OF PROCUREMENT OF SUBSTITUTE GOODS, TECHNOLOGY OR SERVICES) ARISING OUT OF THE USE OR THE INABILITY TO USE THE SOFTWARE.

F. General

These Terms are governed by the laws of the State of New York, and you may only bring claims exclusively in New York courts. Pace shall be entitled to bring a claim in the courts of any jurisdiction. Any failure by Pace to enforce any of its rights hereunder or applicable law shall not constitute a waiver of such rights. Pace’s licensors and suppliers shallbe third-partyy beneficiaries of this License Agreement, as applicable.

YOUR USE OF THE PRODUCT CONSTITUTES YOUR ACKNOWLEDGEMENT THAT YOU HAVE READ THESE TERMS AND AGREE TO BE BOUND HEREBY.

Open Source Licenses

The software contained in this product may be covered by certain components consisting of free software or open source software. A list of these components and a copy of the relevant copyright notices and license term notices that are required by such licenses are available at this web page:

http://www.pace.com/opensource/license

This list may change from time to time and may depend on the model of product or the version of software you have received. If you are unable to access this web page and wish to have a copy of this list, please contact the Open Source Administrator at: 3701 FAU Boulevard, Suite 200, Boca Raton, Florida 33431 USA. To the extent that the terms of these open source or free software licenses prohibit any of the restrictions in any end-user license included with the product, such restrictions will not apply to the applicable open source or free software component.

For more manuals by Blogs, visit ManualsLibraryy

Pace Xi5 Streaming TV Box- FAQs