JBL Endurance Peak 3 True Wireless Headphones
WHAT’S IN THE BOX
APP
How to wear
- ATTACH ear tips and ENHANCERS
Mix and match for a perfect fit and audio performance
- TWISTLOCK™ Technology
First time use
Power on & Connect
DUAL CONNECT
CONTROLS
* Enable advanced controls by connecting your JBL ENDURANCE PEAK3 to the JBL Headphones App.
** ENABLE YOUR VOICE ASSISTANT THROUGH THE JBL HEADPHONES APP AND ASSIGN IT TO YOUR PREFERRED EARBUD (L/R).
VOICEAWARE
POWER OFF
MANUAL SETUP
Connect to a new Bluetooth device
Factory reset
DO MORE WITH THE APP
Charging
WATERPROOF & DUSTPROOF IP68
LED behaviors
TECH SPEC
- Model: ENDURANCE PEAK3
- Driver size: 10 mm/ 0.39″ Dynamic Driver
- Power supply: 5 V 1 A
- Earbud: 12.5 g per pc (25 g combined)/ 0.0275 lbs per pc (0.055 lbs combined)
- Charging case: 76 g/ 0.167 lbs
- Earbud battery type: Lithium-ion polymer (70 mAh/ 3.85 V)
- Charging case battery type: Lithium-ion polymer (950 mAh/ 3.7 V)
- Charging time: 2 hrs from empty
- Talk time: 5.5 hrs
- Music playtime with BT on: up to 10 hrs
- Frequency response: 20 Hz – 20 kHz
- Impedance: 16 ohm
- Sensitivity: 102 dB SPL@1 kHz
- Maximum SPL: 93 dB
- Microphone sensitivity: -38 dBV/Pa@1 kHz
- Bluetooth version: 5.2
- Bluetooth profile version: A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth transmitter frequency range: 2.400 GHz – 2.4835 GHz
- Bluetooth transmitter power: < 14 dBm
- Bluetooth transmitter modulation: GFSK, π/4 QPSK, 8DPSK
- Maximum operation temperature: 45 °C
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg, averaging over one gram of tissue. Device types: (IC: 6132A-JBLENPEAK3) have also been tested against this SAR limit. According to this standard, the highest SAR value reported during product certification for head use is 0.99 W / kg. The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters, and similar accessories shall not contain metal parts in their assembly. The use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s ear and the product (including the antenna). Head exposures that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
For more manuals by JBL, visit ManualsLibraryy
JBL Endurance Peak 3 True Wireless Headphones-FAQs
What activities are the JBL Endurance Peak 3 best for?
Ideal for sports and outdoor activities thanks to their secure TwistLock™ ear hooks and IP68 waterproof/dustproof rating. Perfect for running, gym workouts, hiking, and swimming (up to 1.5m depth for 30 mins).
How do I control the volume on the Endurance Peak 3?
Volume Up: Tap once on the right earbud.
Volume Down: Tap twice on the right earbud.
Customize controls via the JBL Headphones App.
Are the JBL Endurance Peak 3 waterproof?
Yes! They have an IP68 rating, meaning they’re waterproof (1.5m for 30 mins) and dustproof. Safe for swimming, rain, and sweat.
How long does it take to charge the earbuds?
Full charge: ~2 hours.
Quick charge: 10 minutes = 1 hour of playback.
Total battery life: Up to 28 hours (4hrs earbuds + 24hrs case).
How do I know when the earbuds are fully charged?
Charging: Red LED light on.
Fully charged: LED turns off.
Can I wear these with glasses?
Yes! The flexible ear hooks adjust comfortably over glasses.
How do I skip songs on the Endurance Peak 3?
Next track: Press the right earbud’s JBL logo for 2 secs.
Previous track: Press the right earbud’s logo for 3–4 secs.
Does the Endurance Peak 3 have noise cancellation?
No, but it has passive noise isolation from the snug fit.
Can I use just one earbud at a time?
Yes! Use either left or right earbud independently in mono mode.
How do I reset the earbuds?
Press and hold the right earbud’s touch control for 15 secs while charging.