Dualit 2 slice toaster User Manual

Dualit 2 slice toaster

1. Slot Selector Switch.
2. Timer.
3. Safety Plug.
4. Ejector Knob.
5. Slide out Crumb Tray

IMPORTANT SAFEGUARDS

1. READ ALL INSTRUCTIONS.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electrical shock, do not immerse any part of this product in water or other liquids.
4. Close supervision is necessary when any appliance is used by or near children.
5. Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
6. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or has been damaged in any manner. Return the appliance to the authorised service facility for examination, repair, or adjustment.
7. The use of accessory attachments not recommended by the appliance manufacturer may cause injury.
8. Do not use outdoors.
9. Do not place on or near a hot gas or electric burner, or in a heated oven.
10. Please do not use the appliance for anything other than its intended use.
11. Oversized food, metal foil packages, or utensils must not be inserted in a toaster as they may pose a risk of fire or electric
    shock.
12. A fire may occur if toasters are covered or touching flammable material, including curtains, draperies, walls, and the like, when in operation.
13. Do not attempt to dislodge food when the toaster is plugged in.
14. Unplug the toaster when not in use.

SPECIAL TIPS FOR SUCCESSFUL TOASTING

1. The ideal slice of bread is 4 1/2” x 4 1/2” x 1/2”. Do not force bread that is too thick or too long into the slots, as this may cause difficulty ejecting the bread once toasted.
2. Do not insert broken slices of bread into the slots.
3. Fully load ALL heated Slots.
4. The toaster can be turned off at any time during the toasting cycle by turning the timer ➁ to the ‘O position.
5. The shade required can be changed during the toasting cycle by turning the timer to another setting.
6. Keep elements free from bread crumbs and broken pieces of bread, as these will carbonize and burn out the elements.

OPERATING INSTRUCTIONS FOR 2, 3 & 4 SLOT MODELS

1. Lift the round Ejector Knob ➃ and insert bread, muffins, or bagel slices into the appropriate slots.
2. Number of slices to be selected
3. To activate the toaster, turn the Timer➁ clockwise to the desired toasting shade: Approximate position:
   • 1.5 — Light Toast
   • 2.5 — Medium Toast
   • 3.0 — Dark Toast

2-SLOT MODEL
One slice: The Slot Selector Switch marked ‘l’ when depressed will choose the left slot for toasting. Two slices: The Slot Selector Switch
marked ‘ll’ when depressed will choose both slots for toasting

3-SLOT MODEL
Two slices: The Slot Selector Switch marked ‘II’, when depressed, will choose the left slots for toasting. Three slices: The Slot Selector
Switch marked ‘III’ when depressed will choose all slots for toasting.

4-SLOT MODEL
Two slices: The Slot Selector Switch marked ‘ll’ when depressed will choose the left slots for toasting. Four slices: The Slot Selector Switch
marked ‘llll’ when depressed will choose all slots for toasting. For best results, toast should be inserted into ALL slots chosen by the
slot selector. If any heated slots are left empty, the other heated slots
will toast unevenly.

THIS WILL IMMEDIATELY START THE TOASTER.
Automatic timing will start, and the red neon light will illuminate.
When the timer reaches zero (this can be achieved manually), the neon light and heating element will switch off. The timer will stop ticking when the toast is done. The toast will not pop up, but will keep warm inside for approximately 10 minutes until ready for serving.

• To eject toast, press the Ejector Knob ➃ to the down position, and the toast will pop up ready for serving.
• The toaster is OFF when the Timer is in the ‘O position (regardless of the Slot Selector position).
• Unplug the toaster when not in use.

WARM UP GUIDE

The Dualit toaster was designed for commercial use in restaurants and hotels in England, where the toaster may be in continual use for 8 hours. Therefore, the heating elements are of a heavy construction. Because of this, you may experience what you consider to be a longer warm-up period. THIS IS NORMAL. Once warm, however (this is
achieved after one toasting cycle, you will experience quick heating and even toasting. When beginning toasting or after a lapse of 15 minutes, the outsides of the bread in the end slots may be under-toasted. This can be avoided by preheating the selected slots before inserting bread by setting the timer for two or three minutes. When the toaster is warmed up, consistent results will be achieved.

CLEANING INSTRUCTIONS

ALL MODELS

1. Always unplug the toaster before cleaning.
2. Crumbs should be carefully brushed off the elements (using only a soft brush), and the toaster shaken out. NEVER insert a fork or other sharp instrument to remove torn pieces of bread, as the heating elements may be damaged.
3. Remove the crumb tray to clean.
4. Use a damp sponge or cloth to wipe off the outside surfaces of the toaster

FOR MORE MANUALS BY DUALIT, VISIT MANUALSLIBRARYY

Dualit 2 slice Toaster-FAQs