Jetson Bolt Electric Ride-On Bicycle User Manual

Jetson Bolt Electric Ride-On Bicycle

INCLUDED IN THE BOX

1. Front Tire
2. Headlight
3. Stem Quick Release
4. Stem
5. Handlebar
6. Frame
7. Battery
8. Saddle
9. Taillight
10. Rear Fender
11. Rear Tire
12. Kickstand
13. Foot Rest
14. Front Fender

FEATURES AND SPECS

• MODEL: BOLT
• MOTOR: 250W
• MOTOR TYPE: HUB
• BATTERY: 36V, 5.2 AH LITHIUM ION
• CHARGER: 110V – 240V
• CHARGE TIME: 3-5 HOURS
• WHEEL DIAMETER: 14″
• PRODUCT WEIGHT: 34 LBS
• WEIGHT LIMIT: 250 LBS
• MAX SPEED: 16 MPH
• MAX RANGE: 35 MILES
• CLIMBING ANGLE: 15°
• RECOMMENDED AGE: 13+
• FRAME: ALUMINUM ALLOY
• PRODUCT DIMENSIONS: L: 40” x W: 20” x H: 37”

ASSEMBLY

The Bolt comes mostly assembled, you will need to attach the Rear
Fender and the Foot Rests. To attach the Rear Fender, remove the screw above the Rear Tire using the provided Allen Key. Then, attach the Rear Fender using the Screw. Make sure the screw is tight and the Rear Fender is secure.

To connect the Foot Rests to the Bolt, place each Foot Rest onto the tube and turn it until it is secure.

OPERATING THE BOLT

TURNING THE BOLT ON AND OFF To turn the Bolt on, push the Power Switch up to “ON.” To turn the Bolt off, push the Power Switch down to “OFF

BATTERY INDICATOR
The Bolt has a Battery Indicator on the Handlebar. When all four lights are on, the Bolt is fully charged. When only one bar remains, the Bolt needs to be charged.

TURNING THE LIGHTS ON AND OFF
To turn the Headlight and Taillight on, hold down the Horn Button for 3 seconds. Turn off the lights by holding the Horn Button down for 3 seconds again.

CRUISE CONTROL SETTINGS
To use the cruise control feature, press the Cruise Button when you have reached the speed you would like to maintain. Apply the brake to turn off cruise control.

CHARGING THE BATTERY

Your Bolt comes with a built-in rechargeable lithium-ion battery. Always use the provided charger only. Please remember to cover the Charging Port when you are done charging. Before your first ride, you must fully charge the Bolt – charge for 6 hours for the first 3 times you use it. For every ride after, charge your Bolt until it is fully charged, and NOT LONGER. Do not leave any chargers plugged in overnight, or leave them plugged in past the charge time.

1. Plug one end of the power cord into a grounded AC outlet and
   the other into the Bolt’s Charging Port. The red charging light on the charger unit will turn on.
2. The red light will turn green once fully charged. Recharge the Bolt after each use.

THE CHARGER OFFERS A CHARGING STATUS ON THE TOP OF THE CHARGER:
CHARGING LIGHT RED: Battery is charging.
CHARGING LIGHT GREEN: Charging is complete.
Don’t use the Bolt if the battery emits strange odors, overheats, or
begins leaking. If the battery does leak, do not touch any leaking
materials, as the battery contains dangerous substances. Do not open
the battery and do not insert anything into the battery. Do not charge the battery if it has over-discharged. It should be discarded for your safety. Do not turn on the Bolt while it is charging.

UNFOLDING THE BOLT

Lift the Handlebars until it is aligned with the Stem. Then, lock the Stem Quick Release.

Unlock the Stem Quick Release and lower the Handlebars slowly so you do not scratch the frame.e

SAFE RIDING

Helmet: Most serious injuries that occur while riding are head injuries. This could be prevented by wearing a helmet. Before each ride, check whether the Frame, handlebars, and Saddle are
secure, the Fenders are properly aligned, the tire pressure is
sufficient, and the brake system works correctly. Make sure you can
Reach and squeeze the Brake Levers. Foot Position – While riding the Bolt, keep your feet on the footrests. Do not ride with your feet dangling over the sides. Remain seated while riding the Bolt. To start riding, turn the Twist Throttle slowly. Get accustomed to the acceleration of the throttle. Make your turns slowly and cautiously, and give yourself stopping distance. It is recommended you practice your first ride on the Bolt in an open space with no obstacles in your way. Practice shifting the gears while riding. Only shift gears while in motion. Avoid putting your body weight on the handlebars. Braking – To come to a stop, squeeze the Brake Levers. Be careful not to squeeze the Brake Levers too fast, as it may cause too sudden a stop or jerking motion.

CARE AND MAINTENANCE

WEIGHT LIMIT: The maximum load is 250 lbs. Going above the maximum weight limit can cause injury or damage to the bicycle.

CLEANING THE BOLT: To clean the Bolt, carefully wipe with a damp cloth, then dry with a dry cloth. Do not use water to clean the Bolt, as the electrical and electronic systems may get wet, resulting in personal injury or malfunction of the bicycle. Lube the chain every so often to keep it smooth.

BATTERY

• Keep the bike away from fire and excessive heat.
• To avoid damage to the battery, never subject the Bolt to intense physical shock, severe vibration, or impact.
• Protect the bike from water or moisture.
• Never disassemble the bike or its battery.
• If there are any issues with the battery, please contact Jetson
  Customer Support

STORAGE

• If you plan on storing the Bolt for a substantial period, please
  Make sure you fully charge the battery before storing. The battery should be fully charged once a month after this.
• To protect against dust, cover the Bolt.
• Store the Bolt indoors, in a dry place, and at a suitable temperature.
• You should bring the Bolt into a warm environment (above 50
  degrees Fahrenheit) for charging.
• Do not leave the Bolt plugged into the charger for long periods

SAFETY WARNINGS

Here are some useful tips to make sure you always have a safe ride:

• Children, the elderly, and pregnant women should not use the Bolt.
• Do not ride after drinking or taking prescription medication.
• Do not carry items when riding.
• Before each ride, inspect each part of the Bolt to ensure it has been maintained correctly and is functioning properly.
• Always give way to pedestrians.
• Always comply with local traffic laws and regulations.
• Be alert to things in front of and far away from you.
• Make sure your feet are always placed securely on the footrests.
• The Bolt cannot be ridden by two or more people. Only one person can ride at a time.
• When you ride the Bolt along with other cyclists, always keep a safe distance to avoid a collision.
• When turning, be sure to maintain your balance.
• Do not allow distractions when riding, such as answering the phone or engaging in any other activities.
• Avoid riding in the rain or on smooth surfaces such as snow or ice.
• Do not ride on roads with obstacles (such as litter, small stones, etc.).
• Avoid riding in narrow spaces or on steep slopes.
• Avoid riding around flammable gas, steam, liquid, or dust that could cause fire.
• Never operate the product barefoot and keep your shoelaces tied.
• Riding with improperly adjusted brakes is dangerous and can result in serious injury or death.
• Applying brakes too hard or too suddenly can lock up a wheel,
  which could cause you to lose control and fall. Sudden or excessive application of the front brake may pitch the rider over the handlebars, which may result in injury or death

FOR MORE MANUALS BY JETSON, VISIT MANUALSLIBRARYY

Jetson Bolt Electric Ride-On Bicycle-FAQs