Lavazza Classy Mini Coffee Machine User Manual

Lavazza Classy Mini Coffee Machine

SAVE THESE INSTRUCTIONS

AT LEAST ONE COPY OF THIS MANUAL SHOULD BE KEPT IN A LOCATION AVAILABLE TO ALL MAINTENANCE AND MANAGEMENT STAFF.

DO NOT permit children to use the system unless there is adult supervision. The system dispenses very hot water.

CAUTION: There are sharp needles that puncture the Lavazza CLASSY Mini located above the Lavazza CLASSY Mini Holder and at the bottom of the Lavazza CLASSY Mini Holder. To avoid the risk of injury, do not put your fingers in the Lavazza CLASSY Mini Assembly Housing.

CAUTION: There is extremely hot water in the Lavazza CLASSY Mini Holder during the brew process. To avoid the risk of injury, do not lift the Handle or open the Lavazza CLASSY Mini Assembly Housing during the brewing process.

SHORT CORD INSTRUCTIONS: A short power supply cord is provided to reduce the risk of becoming entangled in or tripping over a longer cord. If an extension cord is used, (1) the marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance; (2) the cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over unintentionally; and (3) the extension cord must include a 3-prong grounding plug

THIS PRODUCT IS FOR HOUSEHOLD AND HOSPITALITY APPLICATIONS USE ONLY.

CAUTION: When you see this sign, please refer to the safety precautions to avoid possible harm and damage.

INFORMATION: When you see this sign, please take note of the advice for the correct and safe usage of your coffee machine.

DANGER: When you see this sign, it is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of fire or electric shock.

WARNING: THIS PRODUCT CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM

COMPONENTS AND CONTROLS

CONTROL UNIT

PREPARING THE MACHINE

We are not liable for any damages in case of:

•  incorrect use and other uses than the intended purposes;
• Repairs performed at unauthorized service centers;
• tampering with the power cord;
• tampering with any part of the machine;
• Use of spare parts and accessories which are not original;
• No water softening;
• storage in rooms below 4°C (39,2°F);
• use below 5° C (41°F);
• use over 40° C (104°F);
• Use in places with relative humidity above 95%;
• using incompatible capsules.

In any of these cases, the warranty is canceled.

STARTING THE MACHINE

Set the machine on a flat, stable surface, far away from water or heat sources. Do not connect the machine to the mains supply. Damage caused by failure to apply these instructions will void the guarantee.

• Rinse the tank before use. Fill the water tank only with fresh, non-carbonated drinking water. The cover can be lifted to fill the tank directly

The use of a water filter (an optional accessory) improves water quality and prolongs machine life. Only use products
specifically for coffee machines, commonly available on the market, and in compliance with current pertinent standards. In order to insert the filter, follow the instruction sheet which comes with the accessory. Change the filter
at the intervals indicated on the filter instructions sheet.

The water level should never exceed the MAX indication, and it must always be maintained above MIN. Only use non-carbonated fresh water. Hot water and other liquids can damage the tank.

Make sure that the hands, the machine, the cord, and the support surface of the machine are not wet

• Insert the plug into the socket.

• Press one of the switch-on/supply buttons to switch the machine on.
• The coffee machine starts the heating cycle. The switch-on/supply buttons will start blinking to a light white.
• The machine will be ready for use when the switch-on/ supply buttons light up to a steady white light.
• Place a glass below the dispensing spout. Press the LUNGO supply button and wait for water to be supplied.

In case water is not supplied, repeat the cycle several times (up to six times max.).

• Empty the full tank by performing again the dispensing cycles to end the rinsing procedure.

Empty the glass every time it reaches its maximum capacity level by temporarily interrupting the cycle.

STAND-BY FUNCTION

To ensure energy conservation, the machine automatically passes to the stand-by mode after 30 minutes of not being used. The machine can be set to the stand-by mode manually, first for 30 minutes, by keeping both buttons pressed down for at least 3 seconds. This mode is indicated by the switching off of the buttons. The machine can be reactivated by pressing the buttons again.

PREPARATION FOR COFFEE BREWING

The coffee machine features two positions for preparing the coffee: espresso cup/mug or glass.

1. Place the cup or a small cup under the coffee dispenser if you wish to have traditional espresso coffee.
2. Remove the drop collecting tray to use a glass, if you wish to have weak coffee

PREPARING THE COFFEE

ESPRESSO DELIVERY

Make sure that the switch-on/supply buttons light up to a steady white light.

• Place the cup/coffee cup as shown (see PREPARATION FOR COFFEE BREWING).

To always have a coffee at the perfect temperature, it is recommended to preheat the cup with hot water. Position the cup under the dispensing spout without inserting the capsule. Press one of the switch-on/ supply buttons to supply hot water enough to preheat the cup.

• Lift the capsule loading lever until it locks into position to open the pod fitting compartment.

Never put fingers or objects in the capsule holder. Only Lavazza or compatible capsules must be introduced into the capsule holder.

• Put a Lavazza capsule into the capsule fitting compartment.

Single-dose capsules are prepared to dispense one coffee/product. DO NOT use the capsules more than once. Inserting two or more capsules can cause the machine to malfunction

• Lower the capsule loading lever to close the pod fitting compartment.
• Press the ESPRESSO button to start delivery. The machine will stop delivery automatically when the programmed measure is reached (40 ml) (1,35 oz).

The switch-on/supply button will light up to a blinking white light when the product is being supplied.

If the power supply is interrupted during the coffee supply cycle, restore the power supply and restart the
coffee supply procedure.

If during the supply cycle, water is lacking in the tank, water lack will be indicated by a white steady LED on the selected button, while the LED on the other button will start flashing, then proceed as follows:

1. Fill the water tank up to the MAX level indicated.
2. Press the power-on/supply button previously selected. The button will start flashing, and the coffee supply procedure will restart.

• For a new supply cycle, wait for the supply buttons and the multifunction button to turn on with a steady white light.
• Once the supply is over, lift and then lower the capsule loading lever to unload the exhausted capsule.

LUNGO DELIVERY

• Press the LUNGO button to start delivery. The machine will stop delivery automatically when the programmed measure is reached (120 ml) (4,057oz)
• For a new supply cycle, wait for the supply buttons and multifunction button to turn on with a steady white light.
• Once the supply is over, lift and then lower the capsule loading lever to unload the exhausted capsule.

After 5 supplies, the switch-on/supply buttons start blinking fast with white light to indicate that the capsule drawer is filled. Empty the capsules drawer and press one of the buttons to reset the machine. Now the machine is ready for a new supply.

In case of soluble pods, it is recommended that a brief plain (i.e., by using only water) supply should be dispensed before inserting the pod, so that you can best enjoy the product

COFFEE DOSE PROGRAMMING

Measures are always programmed using the same button; any other buttons are ignored. The programmed amount of brewed coffee can be changed by repeating the programming.

1. Place the mug/cup as shown (see PREPARATION FOR COFFEE BREWING).
2. Lift the capsule loading lever until it locks into position to open the pod fitting compartment.
3. Put a Lavazza capsule into the capsule fitting compartment.
4. Lower the capsule loading lever to close the pod fitting compartment.
5. Press and hold one of the two coffee delivery buttons. After about 3 seconds, the selected key will flash, and the coffee machine will enter the programming mode.
6. Once the desired amount of coffee has been obtained, stop supplying by releasing the button.

If the programmed measure exceeds the maximum allowed (220 ml-7.44 oz), the machine will automatically stop delivery, the delivery button will blink, and the last programmed measure will be saved in the memory. If there is a power failure during programming, the last programmed value remains in the memory. If during a dose programming, water lack is indicated, the machine stops the supply, and the dose being programmed won’t be saved. Once the water tank, repeat the dose programming procedure.

MAINTENANCE AND CLEANING

Never use solvents, alcohol, or other aggressive substances or ovens for drying the coffee machine components. Wash machine components (electric components excluded) with cold/lukewarm water and nonabrasive clothes/sponges.
All removable components can be cleaned by using a dishwasher. Do not leave water in the tank and water circuit for more than 3 days. If this is the case, drain the tank and circuit, rinse it, and refill it with fresh water, then carry out a delivery without a capsule before making any coffee or other beverage.

MACHINE WASHING CYCLE

To clean the dispenser, perform a weekly COFFEE BREWING procedure without inserting the capsule

CLEANING THE USED CAPSULE DRAWER, THE DRIP TRAY DRAWER, AND THE COFFEE DISPENSER

The used pod collecting drawer and the drop collecting drawer should be emptied and cleaned after making coffee 5 times or every two/three days.

1. Remove the used capsule drawer/drip tray
2. Remove and empty the used capsule collecting drawer.
3. Remove the cup / small cup supporting grid, then empty the fluids from inside the drop collecting tray
4. Clean the components with cold or lukewarm water, then dry them and refit them correctly
5. Press the tab on the back of the dispenser to remove it from the machine. Wash the spouts with cold or warm water.
   The dispenser must be washed every 3 months
6. Insert the spouts into the machine, paying attention to the click that indicates its proper functioning.

Regularly verify that the used pod collecting drawer and the drop collecting drawer will not be full, to avoid machine malfunctions and damage.

DESCALING

Limescale normally builds up with extended use of the appliance; the machine needs descaling every 2 months and/or whenever a reduction in water flow is noticed.

In the event of any operational conflict, this use and maintenance manual shall prevail on any indication specified on accessories and/or components sold separately.

For descaling can be used a descaling product for coffee machines of non-toxic and/or non-harmful type, commercially available.

Check there is no capsule inside the capsule containing compartment

Do not drink the descaling solution and products dispensed until the completion of the cycle. Never use vinegar as a descaling solution.

1. Remove and empty the water tank.
2. Refill the tank with a descaling solution and water as specified on the package of the descaling product. Refit the tank.
3. Power the machine ON and place a suitable container under the spout.
4. Press the LUNGO button and supply two cups (approximately 120 ml each).
5. Allow the descaling solution to work for about 15- 20 minutes.
6. Switch on the machine by pressing one of the switch-on/ supply buttons, then proceed as described in steps 4 and 5.
7. Repeat the steps described in point 6 until the water tank is completely empty.
8. Remove the tank and rinse it with fresh drinking water. Fill it completely.
9. Switch the machine on by pressing one of the switch-on/supply buttons. Place a suitable container under the dispenser. Press the LUNGO button and supply the entire contents of the tank.
10. When the water is finished, refill the tank and repeat the steps described in point. When finished, the end of the descaling cycle is completed.

TROUBLESHOOTING

For more manuals by Lavazza, visit ManualsLibraryy