Sealight Xenower X5 LED Headlight Bulb
Package Contents:
- LED Bulb X2
- Gloves X2
- User Manual X1
Product specifications
USER INSTRUCTIONS
- Please purchase the product through official channels; otherwise, we won’t provide after-sales service.
- As the product has small & sharp parts, please keep it away from children.
- After receiving the product, please carefully check whether it is damaged or if any parts are missing. If there is any problem, please contact Customer Service.
- This product is only suitable for vehicles that use 12V batteries. High voltage may cause damage.
TECHNICAL SUPPORT & SERVICE TEAM
- E-mail: [email protected]
- Tel: (+1) 805-538-4353
- If there are any questions about the bulbs, contact our service team for help.
INSTALLATION INSTRUCTIONS
Important Notes:
- Please light up the bulb before installation.
- The OE halogen bulb would be extremely hot for quite a long time after shutting down the engine. To avoid burns, please wait at least 2 hours before replacing the lamps.
- Wear gloves while replacing the lamps, and do not touch the LED chips.
- If the lamps do not light up, please unplug the power line, connect it reversely and try again.
Models: H11/9005/9006/9012
INSTALLATION INSTRUCTIONS
- Fig. 1: Remove the dust cover and the OE halogen bulb.
- Fig. 2: Line up the tabs with the slots of the assembly. Warning: the tabs are asymmetrical
- Fig. 3: Insert the lamps, turn them clockwise, then clamp them tightly.
- Fig. 4: Connect the power line.
Suggestion
- For most vehicles. We suggest keeping the LED chips facing the 3 and 9 o’clock directions when locked into place to achieve the best beam pattern.
- If you’re not satisfied with the beam pattern. Please follow the guide as the picture shows: After the installation of the bulb, grab the base and rotate to get a better beam pattern.
- If the beam pattern is too high, adjust the buckle of the assembly to adjust the beam pattern. (As the picture shows above.)
FAQ
Q: The model of lamps I purchased is different from my OE halogen lamps. Can I get an exchange for the correct model?
- The main reasons:
- Amazon confirmed that the Fit system is not 100% accurate.
- Your headlight assembly is not an OE part.
Please double-check the model of your OE halogen bulb. And contact our Customer Service for an exchange.
Q: The size of the lamps is not correct; they’re either too long or too wide, and LED lamps can’t be installed in the headlight assembly. How can I get proper-sized lamps for my car?
- Some LED lamps are not in a 1:1 ratio with the OE halogen bulbs. The large base is for better heat dissipation and prolonging the life of the lamps. If the lamps are not suitable for installation, please contact Customer Service.
Q: Do you meet the five phenomena below:
- Errors on the instrument panel;
- The Lamp keeps flashing.
- Can’t switch between high and low beams;
- High and low beams reversed;
- The Lamp does not turn on or off.
- The above phenomenon is a decoding problem, which is mainly caused by the automotive computer failing to detect the correct signal. You can contact Customer Service to obtain the decoder and solve the decoding problem.
Q: How to adjust the lamps to 3-9 o’clock? I’ve read all the instructions, but still can’t find the method.
- We recommend keeping the LED chips facing the 3 o’clock and 9 o’clock positions to ensure the best beam pattern and visual effect. However, it is impossible to adjust to this position for some vehicles. There is no need to worry about the position of the LED chips as long as the beam pattern is acceptable.
Q: The Daytime Running Lamps work incorrectly, and they keep flashing. How can I solve the issue?
- If your Daytime Running Lamp and High beam are the same bulb, the case would be complicated to solve. Please contact Customer Service.
WARRANTY DESCRIPTION
Thank you for purchasing our products. All of our products are manufactured with the best quality control. To protect your rights, you can extend the warranty period for 6 months by contacting us via the links below or sending us an email…
- Extended warranty period:
- E-mail: [email protected]
- Links: https://sealight-led.com/membership / https://sealight-led.com
For More Manuals By SEALIGHT, Visit ManualsLibraryy.
Sealight Xenower X5 LED Headlight Bulb-FAQs
Q1. How do I install Sealight Xenower X5 LED headlight bulbs?
To install, open the headlight housing, remove the dust cover, disconnect and take out the old halogen bulb, then insert the LED bulb. Finally, connect the power plug and test the light output before sealing everything back.
Q2. What is the correct way to position LED headlight bulbs?
For single filament bulbs, the LED chips should face side-to-side—one set pointing at 3 o’clock and the other at 9 o’clock. This ensures the light reflects correctly for a focused beam.
Q3. Are Sealight Xenower X5 LED bulbs adjustable?
Yes. They come with a 360° adjustable socket, allowing you to rotate the bulb for the best beam pattern without causing glare.
Q4. Do LED headlights need alignment after installation?
Yes. Even with perfect installation, new headlights should be aligned using the adjustment screws so the beam is level and safe for oncoming drivers.
Q5. How do I adjust the LED headlight beam pattern?
Use the vertical adjustment screw behind the headlight to move the beam up or down. Turn clockwise to lower the beam and counterclockwise to raise it.
Q6. What is the correct beam pattern for headlights?
The low beam should be at or just below the height of the headlight center, angled slightly lower on the driver’s side and higher on the passenger side to light up road signs without blinding other drivers.
Q7. How do I check if Sealight bulbs fit my car?
Check your vehicle’s make, model, and year in the compatibility chart or your owner’s manual. Common bulb sizes include H11, H7, 9005, and 9006.
Q8. What brightness should I expect from Sealight Xenower X5 LEDs?
These bulbs are rated at around 6 times brighter than standard halogens, delivering between 8,000–13,000 lumens, depending on your headlight housing.
Q9. How long do Sealight LED headlight bulbs last?
With proper use, they last up to 50,000 hours, thanks to their advanced cooling system.