Blog Post

Rasonic SMART FEED Automatic Pet Feeder-featured

Rasonic SMART FEED Automatic Pet Feeder User Manual

Rasonic-logo

Rasonic SMART FEED Automatic Pet Feeder

Rasonic SMART FEED Automatic Pet Feeder-product

 

Important Safeguards

When using the appliance, please follow below safety precautions below:

  1. Remove and discard all packing materials from the appliance. Make sure children and pets do not play with them to avoid any danger.
  2. Use the provided USB power cord and adapter to connect the appliance.
  3. Never use a defective or loose USB power cord and adapter. Make sure the USB power cord and adapter are dry before use and inserted firmly when in use. Always hold the adapter tightly with your hands when inserting or removing it. Do not grasp the USB power cord.
  4. Do not place heavy objects on the USB power cord, adapter, or appliance, or let it touch any hot surface. Never clip, modify, stretch, or twist the USB power cord, adapter, or appliance.
  5. Do not use the USB power cord when it is tangled.
  6. Never immerse the appliance, battery, USB power cord, or adapter in water or let them get wet, it is to avoid electric shock.
  7. To avoid electric shock, never assemble accessories, touch, plug, or unplug the battery, USB power cord,d and adapter with wet hands.
  8. CAUTION! To avoid suspension of the electricity supply, the user can install 3 D-type batteries in the battery compartment at the bottom of the appliance.
  9. Children shall not play with the appliance. Using, cleaning, and maintenance shall not be made by children without supervision. Put the appliance and its USB power cord,d and adapter in a place not reachable by children.
  10. The appliance is intended for indoor use only. Do not use the appliance in an environment exposed to direct sunlight.
  11. To avoid danger, never use the appliance near the environment of:
    • Flammable materials, spra,  ys and aerosols
    • Heat source (e,.g. radiator), , exposure to direct sunlight
    • Near water
    • Massive hot air, steam, or humid area
  12. The appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities, oa or lack of experience and knowledge, if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
  13. The appliance is not recommended for pets that are under 3 months old.
  14. The grain bucket cannot hold canned food or wet food.
  15. To avoid clogging the appliance, do not use grain with special shapes, holes, or diameters exceeding 12 mm.
  16. The shape and density of the rain will affect the actual capacity of the grain bucket. And actual weight per serving will vary due to different grain densities.
  17. Set the appliance according to the breeds, age, behavior, or eating habits of your pet.
  18. To avoid electric shock or damage, please cover or hide the USB power cord.
  19. Always check the condition of the appliance, USB power cord, adapter, and battery. To avoid hazards, please stop using it mmediately if any damage is found. Please contact Shun Hing Electric Service Centre Limited for checking and repairing.
  20. Remove the adapter and USB power cord, detach the battery from the socket before cleaning the appliance, installing, or removing the accessories.
  21. Do not place the appliance in a bookcase, built-in cabinet, or any confined space. Make sure the appliance is stored in a well-ventilated environment.
  22. Do not disassemble, impact, crush, or throw the appliance into fire.
  23. If the user will be away for a long time, replace the battery with a new one and check whether the power supply has been successfully connected before leaving. Ensure sufficient food and power to feed the pets.
  24. Use alkaline D-type batteries fortfor the r supply. Do not use rechargeable batteries.
  25. Do not directly lift the appliance by the upper lid, the grain bucket itself, or the base of the food tray. Lift the food tray base and the main body base with both hands while keeping the appliance in an upright position.
  26. Do not attempt to modify the appliance by yourself or repair it with any parts that are unauthorized parts, otherwise it may cause hazards and the warranty will become invalid.
  27. It is recommended to replace the food-grade desiccant once a month.
  28. To prevent the appliance blockage, place the food-grade desiccant inside the inner lid of the grain bucket.
  29. To prevent pets from knocking over the appliance, it is recommended to place the appliance in a corner or against a wall.
  30. Do not put items other than dry pet food into the grain bucket, as it may cause appliance malfunctions or be mistakenly ingested by pets.

Maintenance, Cleaning, and Storage

It is recommended that users clean this appliance regularly, as excessive accumulation of dust and food residue could potentially harm the health of pets.

Disassembly accessories

Rasonic SMART FEED Automatic Pet Feeder-1

  1. Take off the metal food tray and hold the base of the food tray firmly.
  2. Simultaneously lift the main body base while disengaging the locking positions between the food tray base and the main body base.Rasonic SMART FEED Automatic Pet Feeder-2
  3. After removing the base of the food tray and placing the main body on a flat surface, simultaneously press inward on the upper lid open button of the grain bucket to open it. Clean out any remaining food inside the grain bucket.Rasonic SMART FEED Automatic Pet Feeder-3
  4. Inside the upper lid of the grain bucket, press inward on the inner lid button to open it and clean out the food-grade desiccant.Rasonic SMART FEED Automatic Pet Feeder-4
  5. After removing the lid of the grain bucket and cleaning out the dried food inside, hold the main body firmly.
  6. Simultaneously grip the grain bucket and the main body, and lift them apart.

Assembly accessories

Rasonic SMART FEED Automatic Pet Feeder-5

  1. Align the interface of the grain bucket with the interface of the main body, and install the grain bucket onto the main body in the direction indicated by the arrow.Rasonic SMART FEED Automatic Pet Feeder-6
  2. Fill the dry pet foodintoo the grain bucket.Rasonic SMART FEED Automatic Pet Feeder-7
  3. Press inward on the inner lid button of the grain bucket to open the inner lid and place the food desiccant inside, and close the inner lid switch of the grain bucket.Rasonic SMART FEED Automatic Pet Feeder-8
  4. After filling the dry food and placing the food-grade desiccant on the inner lid of the grain bucket, press inward on both sides of the upper lid button, install it onto the grain bucket, and release the button.
  5. Hold the base of the food tray firmly.Rasonic SMART FEED Automatic Pet Feeder-9
  6. Align the locking positions of the main body base with those of the food tray base.
  7. Install the main body base and place the metal food tray on the food tray base.

Cleaning of the main body and food contact accessories

Note: It is recommended to empty the food desiccant, remove the food from the grain bucket before cleaning and maintaining the main body and accessories.

  1. Clean the surface of the main body with a damp, soft cloth. Do not rinse the main body with water.
  2. Clean the accessories with water and mild detergent.
  3. Do not use lacquer thinner, gasoline, decontamination powder, hard brush, or metal brush to clean the accessories, so as to avoid scratching and corroding the surface of the parts, resulting in odor or breeding of bacteria.
  4. Do not use toxic or corrosive cleaning agents.
  5. Before cleaning, make sure the appliance ipowereder othe ff, food desiccant, foodthe  in grain bucket, accesso,ries and batteries are removed.
  6. After cleaning, to avoid food from getting moldy, make sure the accessories are completely dry before usin themg.

Storage

If you have not used this appliance for a long time, please unplug the adapter and USB power cord, remove pet food and batteries. Put it in a plastic bag after cleaning, and store it in a dry place and avoiding direct ultraviolet light.

Product Specifications

Rasonic SMART FEED Automatic Pet Feeder-10

* The length of operation time can be varied depending on the temperature of the battery and other usage conditions.

Product Descriptions

Product Description

Rasonic SMART FEED Automatic Pet Feeder-11

  1. Grain bucket upper lid
  2. Grain bucket inner lid
  3. Grain bucket
  4. Control Panel
  5. Food outlet
  6. Main body
  7. Metal food tray
  8. Food tray base
  9. Battery compartment
  10. Speaker
  11. Power socket
  12. Adapter
  13. USB power cord

Control Panel

Rasonic SMART FEED Automatic Pet Feeder-12

  1. Indicator Light
  2. Camera
  3. Mic
  4. 【 RESET】 button
  5. 【 FEED】 button
  6. 【 Recording】 button
  7. Food outlet

Power Connection

Connecting power

  1. To avoid damaging the appliance, please assemble the accessories properly before connecting the power.
  2. For the assembly grain bucket, grain bucket upper lid, grain bucket inner lid, metal food tray, and food tray base with the main body, please refer to Chapter 2.2 Assembly accessories.Rasonic SMART FEED Automatic Pet Feeder-13
  3. Open the battery cover and insert three D-size batteries as backup power in the battery compartment, then close the battery cover.
    CAUTION! Be careful to distinguish between the positive and negative terminals of the batteries, and do not install them incorrectly.Rasonic SMART FEED Automatic Pet Feeder-14
  4. Connect the USB power cord to the adapter and the power socket of the main body, then connect the power to power up the appliance.

Cutting off power

CAUTION! Before removing all the accessories, make sure the appliance is disconnected from the power source.

Rasonic SMART FEED Automatic Pet Feeder-15

  1. Remove the USB power cord from the adapter and power socket to disconnect the power.Rasonic SMART FEED Automatic Pet Feeder-16
  2. Press the battery cover lock at the bottom of the main body in the direction indicated by the arrow to remove the backup batteries. Make sure the appliance is powered off before removing other accessories.
  3. For the disassembly methods of the grain bucket, upper lid, inner lid, metal food tray, and food tray base with the main body, please refer to Chapter 2.1 Disassembly accessories.

Operation Instructions

Before First Use

  1. Remove all packaging materials from the appliance. If there is a packaging bag attached to the outer shell of the appliance, please remove it before use. Do not let children or pets play with the packaging bag, as it may cause suffocation and danger.
  2. Thoroughly check the appliance and accessories for any damage or cracks. Do notassembley or use the appliance if there is any damage.
  3. Before the first use, clean the surface of the main body and the interface of the main body with a damp cloth. Other accessories, such as the grain bucket, grain bucket upper lid, grain bucket inner lid, food tray base, and metal food tray, can be cleaned with a neutral detergent.

Before use

  1. Before use, it is recommended to place the appliance in a corner or against a wall. Place it on a stable, dry, heat-resistant, and waterproof surface to prevent accidents.
  2. Before connecting the power, please assemble the main body and accessories properly. Details refer to Chapter 2.2 Assembly accessories.
    CAUTION! To prevent pets from biting the USB power cord and causing electric shock, be careful to cover or hide the USB power cord.

Operation instructions

  1. Open the grain bucket’s upper lid and fill the dry pet food into the grain bucket.
    CAUTION! Do not fill cans of pet food or other wet pet food in the grain bucket.
    CAUTION! Do not use special-shaped or larger than 12mm diameter dry pet food.
  2. Place the food-grade desiccant inside the inner lid of the grain bucket.
  3. Close the upper lid of the grain bucket and connect the power.
  4. After connecting the power, the blue indicator light will turn on, and the appliance will enter standby mode.

Indicator light instructionsRasonic SMART FEED Automatic Pet Feeder-17

Feeding with manual mode

Rasonic SMART FEED Automatic Pet Feeder-18

  1. In standby mode, pressing the【FEED】button once. The appliance will dispense a default amount of food and play the recording twice if any.
    CAUTION! This action does not affect the previously set feeding schedule.

Setting or deleting a recording

Rasonic SMART FEED Automatic Pet Feeder-19

  1. In standby mode, press and hold the【Recording】button. The appliance will emit a single “beep” sound to start recording. Release the button after finishing the recording, and the appliance emits “beep beep” sounds to end the recording.
    CAUTION! The longest recording time is 10 seconds.
    CAUTION! Do not release the button during the recording.
  2. If the user wants to delete the recording, in standby mode, press and hold the 【Recording】button. The appliance will emit a single “beep” soun, and release the button immediately. The appliance will emit “beep beep” sounds to show that the recording has been deleted.
    NOTE: The above method is to replace the old recordings with a blank recording.

Setting and disabling the safety lock

  1. In standby mode, press and hold the【FEED】button for 6 seconds. The red indicator light will flash twice, indicating that the appliance is locked. At this time, the buttons on the main body will not function.
  2. To unlock the appliance, press and hold the【FEED】button for 6 seconds. The red indicator light will flash twice, indicating that the appliance is unlocked.

Factory Reset

Rasonic SMART FEED Automatic Pet Feeder-20

  1. In standby mode, press and hold the【RESET】button for around 7 seconds. The appliance will emit a “ding-dong” sound indicating that it has been restored to factory settings and will reboot the appliance.

Bind Device

  1. The appliance can be bound with the “Rasonic Smart” APP. Scan the QR code below, or download the “Rasonic Smart” APP from “Google Play” or “App Store”. After installation, register a new account and log in accordingly.Rasonic SMART FEED Automatic Pet Feeder-21
  2. User can download the instructions on how to use the mobile APP from the “Installation Guide” of the SMART-FEED Automatic Pet Feeder on the pet appliance page via our homepage www.rasonic.com.

TroubleshootingRasonic SMART FEED Automatic Pet Feeder-22Rasonic SMART FEED Automatic Pet Feeder-23Rasonic SMART FEED Automatic Pet Feeder-24

*If the above solutions cannot fix the problem, do not attempt to repair the appliance by yourself, and please contact Shun Hing Electric Service Centre Ltd. to check and repair.

Special Avowal

  1. The content in the operation manual has been checked. Our company reserves the hermeneutic power to any printing errors or misunderstandingofn the content.
  2. If there are technical improvements on the appliance, the operation manual will be updated in a new version without prior notice. The appliance’s appearance and specifications are subject to themanufacturer’sr information.
  3. In case there is any inconsistency or conflict between the English versions and Chinese versions of the terms, the Chinese versions shall prevail.
  4. The e-copy of the user manual can be sent by email on request. For enquiries, please call Shun Hing Electric Works & Engineering Co., Ltd. hotline at 2861 2767.

After Sales Service

  1. For any defect, in the judgement oa f technician from Shun Hing Electric Service Center Limited, caused under normal use, our company is responsible for repairing or replacing parts of the said electrical appliance free of charge withianeone-yearr guarantee period commencing from the date of purchase. Any defective part that has been replaced shall become our property. Guarantee service does not cover the repair or replacement of consumable parts ,etc.
  2. User must present the official invoice/redemption voucher and the appliance warranty card with the chop from the sales point/redemption center for maintenance. For enquiries, please call Shun Hing Electric Service Center Limited hotline at 2406 5666.

For more manuals by Rasonic, visit ManualsLibraryy

Rasonic SMART FEED Automatic Pet Feeder- FAQs

What is the purpose of an automatic pet feeder?

An automatic pet feeder dispenses pre-set portions of food or medication at scheduled times, ensuring your pet is fed even when you are busy or away.

How do I use the smart pet feeder?

Fill the food container, set portion sizes and feeding times through the control panel or app, and the feeder will automatically release meals at the scheduled times.

How do I connect the feeder to Wi-Fi?

Download the Smart Life app, ensure your phone is connected to a 2.4GHz Wi-Fi network, press and hold the “Feed” button on the feeder until it beeps, then scan and add the device in the app.

How can I reset the pet feeder?

Press and hold the “Feed” button for about 5 seconds until a beep is heard. This restores the feeder to factory settings and clears all schedules.

Why isn’t my feeder connecting to Wi-Fi?

Check that you are using a 2.4GHz Wi-Fi band (not 5GHz). If your router is dual-band, separate the networks. Also, avoid using Wi-Fi extenders or mesh networks during setup.

Can I record a message for my pet?

Yes. Press and hold the record button for 3 seconds until you hear a beep, then record your voice (up to 10 seconds). The message will play at feeding time.

How often should the feeder dispense food?

You can schedule multiple small meals throughout the day. For example, dividing daily portions into 3–4 feedings helps maintain healthy eating habits.

Can I put wet food in the feeder?

Most smart feeders, including this one, are designed for dry food only. Wet food can spoil or clog the dispenser.

What features does the Rasonic SMART FEED offer?

It includes portion control, programmable feeding schedules, voice recording, app connectivity, and in some models, a built-in camera for monitoring pets.

Leave a comment

Your email address will not be published. Required fields are marked *