Petlibro PLWF002 Capsule Water Fountain User Manual

Table of Contents

Petlibro PLWF002 Capsule Water Fountain

Dispose of all packaging materials properly. Keep the polybags away from children and pets, as these bags could cause suffocation.
Do NOT allow children to play with, in, or around the pet water fountain.
Only use attachments recommended or sold by the manufacturer. The use of attachments not recommended or sold by the manufacturer may cause an unsafe
condition. Do NOT modify the pet fountain.
Do NOT operate any appliance if the unit is malfunctioning or has been damaged. Do not attempt repairs on the device yourself. Contact our customer service
immediately for further instructions.
Be sure to disconnect the power supply for safety when the appliance is not in use.
This product is not allowed to run without water.
Never pull the electrical power cord to remove the plug from the wall outlet.
Do NOT allow pets to chew on or swallow any parts. If you are concerned about the power cord, purchase a cord conduit (a hard-plastic protector) at any hardware
store to protect the power cord.
If an extension cord is necessary, one unit with a proper rating should be used.

Soak the filter in a clean bowl for 5 minutes, then rinse the filter thoroughly with tap water.
Position the pump according to the bottom slot shape. Press the pump to make the suction cups under the pump stick tightly. Put the cord in the slot.
Install the soft plug. To prevent water leakage and secure the power cord in the cord slot, please align the cord slot when installing the soft plug.
Install the silicone pipe on the pump. Add water to the tank
Install the filter tray and place the filter in the filter tray. Press down firmly to make sure the pipe outlet comes out.
Install the water tray. Whether to install the spout depends on your pet’s drinking preference.
Connect the power adapter