Petwant F11-W Smart Pet Feeder
Components
Features
Parameters
Set up and Assemble Feeder
Lift the Latch
Hold the latch with your index finger and lift it up to open the lid.
Place Desiccant
Open the desiccant box on the top lid, tear off the transparent wrapping paper of the desiccant bag, place the desiccant bag into the box, and close it.
Plug in Power Adapter
- Battery power supply: remove the battery cover by releasing the retaining clip, insert good-quality alkaline “D” batteries, and reinstall the battery cover. Note: Please use safe and standard alkaline batteries. Do not mix batteries of different specifications and models.
- Power adapter supply: plug in the power adapter and connect the power. Plug the cable into the L-shaped card slot.
Install Food Bowl
Tilt the base unit back slightly, and align the buckle of the food bowl with the base unit to install. Use the same steps to disassemble.
Fill Pet Food
Open the lid, fill the hopper with a suitable quantity of dry food well in excess of a daily amount. To maintain maximum food freshness, we recommend that a maximum of 1 day of food be loaded. Note: The device only supports 5–15 mm dry pet food.
Grain Size Self-check
Set Up Your Pet Feeder
Get Access to App
- Scan the QR code to download the app.
- Please log in or register for an account.
- Click “+” on the top right of the home page and add a device, following the instructions.
Set Up Your Programmed Feeding
The pet feeder will dispense the food based on the programmed feeding, and users can receive the feeding notifications accordingly.
Reset Your Pet Feeder
Long-press press 
button for 5 seconds to reset your feeder until you hear a “Di” sound. The link indicator will flash rapidly, and now you can try to connect your pet feeder again.
Remote Feeding
Enter the device setting page and click “Feeding,” select servings, and click Feed to complete the remote feeding.
Note: Users cannot feed pets via the app when powered by batteries.
Manual Feeding
Open the top lid and press the button once, then the device will dispense one serving of around 10 g. Repeat the above step for more servings.
Display Panel
Indicator Information
Disassemble & Clean
Power Off
Unplug and take out the alkaline batteries.
Clean the Food Hopper
- To disassemble, hold both sides of the food bucket and lift upwards.
- Disassemble the impeller/feeding slice and feeding mechanism.
- The main body of the feeder is not dishwasher-safe. Do not immerse the main body in water. This could damage the internal electronics and cause the batteries to short out, create an electrical shock, or catch fire.
- Make sure all parts of the feeder are completely clean and dry before filling with food.
Assemble the Food Hopper
- Align the food hopper with the slots in the main body and press down.
- Fix the feeding slice and impellers as the above picture shows (please pay attention to the “+” shape directions).
- Align the impeller bottom cover with the slots and rotate in an anticlockwise direction until you hear the crack sound.
- Adjust the impellers and make the rubber parts cover the food outlet as shown in the picture.
Clean the Food Bowl
The food bowl is dishwasher-safe once removed from the main body.
Clean the Body
Use a dry soft cloth to wipe it. The body is not waterproof; please do not use a wet cloth.
Replace the Desiccant Pack
Open the desiccant box cover and replace the desiccant pack. It is suggested to replace it every one or two months.
Replace Alkaline Batteries
Unplug and open the battery lid at the bottom, then replace the batteries.
Replace Food
Take out the food hopper and empty it, then fill it with fresh food and proceed with instant feeding once.
Warnings
- Please keep the food hopper dry after cleaning it.
- Please replace the food on a regular basis if your pets did not eat it up. (For the time period, please refer to the food packing instructions.)
- Please clean and maintain your device on a regular basis to prolong the usage period of your pet feeder.
Safety Precautions
Read all instructions carefully before attempting to operate this device.
Ensure Power Supply
- Please check the power supply before going out.
- Please use a 5V 1A plug for the normal power supply.
- The Camera function will be off when switched to battery mode. The pet feeder will dispense the food normally based on your programmed feeding in the app.
- When the device is offline, the app cannot get access to the dispensing situation.
Keep Device
- The device needs to be placed horizontally and firmly. It is not allowed to be tipped to one side, rocked, or placed upside down.
- Keep the device in a dry area and do not expose it to sunlight. Also, do not place the feeder in a high place to avoid damage from dropping.
- Do not remove any parts from the feeder besides the food tray and food hopper.
- Do not place anything on top of this feeder.
- Ensure there are no barriers near the food outlet so pets can be fed normally.
Caution
- For indoor use ONLY.
- It is NOT dishwasher safe. Hand clean only.
- For dry food use ONLY. Works best with 5–15 mm food diameter or smaller.
- NOT recommended for puppies or kittens less than 7 months old or unable to reach the feeding dish.
- DO NOT use this feeder with puppies, kittens, dogs, or cats with any physical disability.
- Intended for use with dogs or cats ONLY.
- DO NOT allow small children to play with, in, or around the feeder.
- Check the START light frequently to ensure the feeder will dispense properly.
- Before leaving for an extended time, always replace the battery backup with 3 new “D” size batteries.
- DO NOT place any foreign objects in the feeder.
- DO NOT operate the feeder without the bowl, food hopper, and lid securely in place.
- To avoid tripping, always keep the power cord out of the way of foot traffic.
- The Feeder must be placed on a level surface.
- DO NOT disassemble the feeder other than the bowl, lid, and battery cover.
- Dispose of all packaging material properly. Some items may be packed in poly bags; these bags could cause suffocation. Keep away from both children and pets.
- DO NOT attempt any repairs or modifications to the feeder.
- Check with your veterinarian if you are unsure about the proper meal size for your pet.
FAQ
For More Manuals By Petwant, Visit ManualsLibraryy