Petlibro PLAF301 One RFID Smart Pet Feeder User Manual

Petlibro PLAF301 One RFID Smart Pet Feeder

In the Box

Automatic Pet Feeder

Stainless Steel Food Bowl with Holder

Power Adapter

Desiccant Bag

Food Bowl Lid

Food Bowl Shield

User Manual

Quick Start Guide

Collar

RFID Reader

Tag

Product Overview

1. Food Tank Lid
2. Desiccant Bag Holder
3. Food Tank
4. Infrared Sensor A ( Detects pet)
5. Control Panel
6. Infrared Sensor B (Detects food levels)
7. LED Display
8. Feeder Base
9. Food Bowl Lid Pivot Lock
10. Food Outlet
11. Infrared Sensor C (Detects food blockages)
12. Food Bowl Shields
13. Food Bowl Lid
14. Stainless Steel Food Bowl
15. Bowl Tray
16. RFID Reader
17. RFID Reader Prongs
18. Battery Compartment
19. Battery Compartment Cover
20. Speaker
21. Power Port
22. Food Tank Lock

Buttons

Indicators Overview

Indicator Status

Getting Started

Installation
Scan the OR code below to watch the video for product installation, or follow the instructions in the manual to install the feeder.

1. Install the food bowl lid
   1. Press the locks on both sides of the food tank lid, remove the lid, and take out the accessories from the food tank.
   2. Install the food bowl lid in the direction shown in the figure.
   3. After successfully installing the food bowl lid, move the food bowl lid pivot lock to the left to ensure that it’s in the locked state.
2. Install the body
   1. Place the RFID reader on a flat surface, keeping it close to the power port and away from metal objects.
   2. Place the stainless steel food bowl and bowl tray in the designated groove of the reader.
   3. Open the battery compartment at the bottom of the feeder. Install three alkaline D batteries (not included) in case of a power outage.
   4. Plug the USB cable into the power port at the bottom of the feeder.
   5. Place the body in the designated position on the reader.
3. Install the food bowl shields. Insert both shields into the body.
4. Install the food tank. Press the food tank lock to lock it in place.
5. Add dry pet food to the food tank
   • To prevent uneven food dispensing, please add enough pet food to prevent low low-surplus food alarm from being triggered.
   • Recommended kibble size: 2-1 Smm (0.07-0.7in) in diameter.
   • Do not use canned, wet, or moist food.
6. Put the food tank lid on. Place the desiccant bag in the holder under the food tank lid.
7. Connect Power
   1. Plug the SV power adapter into a power outlet.
   2. The indicators will light up automatically to indicate the feeder is on.

App Control

1. Download and install the PETLIBRO app.
2. Follow the instructions to configure the network.

Pair The Collar Tag

1. After successfully adding the device, tap the “ADD COLLAR” button.
2. Place the collar tag in the RFID recognition area, as close to the RFID reader as possible. Note: There are two methods to pair the collar tag: sensor-based pairing and QR code-based pairing. If one method fails, you can switch to the other.
3. After a successful addition, tap “CONFIRM” to pair the collar tag.
4. Follow the app instructions to add relevant pet information.

Care And Maintenance

• Power off the device before cleaning.
• Clean the food bowl with tap water.
• Do not clean the feeder in a dishwasher. Only the stainless steel bowl is dishwasher safe.
• Use a soft, damp cloth to clean the feeder base. Do not wash any part with electronic components.
• Replace the desiccant bag every half a month to keep food fresh.

Power off
Unplug the cable from the outlet and remove the batteries.

Specifications

Safety Instructions

• Use the feeder in a dry place.
• Use the feeder on a level surface.
• Dispose of all packaging materials properly. Some items may be packed in plastic bags; these bags could cause suffocation. Keep them away from children and pets.
• Do not use the feeder with pets that are not able to reach the food bowl or with any physical disability.
• Do not immerse the base part in water at any time, as it may damage electronic components.
• Do not use the feeder outdoors. Check its operation frequently to be sure it is operating properly.
• Do not disassemble the feeder other than as instructed in this user manual.
• Only use accessories recommended or sold by the manufacturer. The use of accessories not recommended or sold by the manufacturer may cause an unsafe
  condition.
• Do not modify the feeder.
• Examine the feeder after installation. Do not plug in if there is water on the power cable or plug.
• To avoid tripping, always position the power cable out of the way of foot traffic.
• Do not install or store the feeder where it will be exposed to weather or temperatures below 0°C (32°F).
• Do not use the feeder without adding pet food first.
• Power off the feeder when it’s not in use.

FOR MORE MANUALS BY PETLIBRO, VISIT MANUALSLIBRARYY

Petlibro PLAF301 One RFID Smart Pet Feeder-FAQs