Anker Soundsync A3352 Bluetooth Receiver
Safety Instructions
- Do not drop, knock, or shake the device.
- Do not disassemble. Do not attempt to open the device.
- Keep the device dry and away from all types of liquids or moisture that will corrode the electronic circuits. If the device gets wet, dry it immediately.
- Avoid extreme temperatures.
- Do not use the device outdoors during thunderstorms.
- Use original or certified cables.
- Do not use any corrosive cleaner/oil to clean.
At a Glance
- Power switch / Multi-function button
- Battery indicator / Status indicator
- 3.5mm AUX input
- Micro USB charging port
- Microphone
- Volume down control
- Volume up control
Using Your Soundsync
Turn on/of
- ON Press and hold for more than 2 seconds
- OFF Press and hold for more than 2 seconds
Note: Soundsync switches on automatically during charging
Button controls
Bluetooth receiver mode
Music
Bluetooth Pairing:
How to connect your Soundsync to two devices at the same time:
- Press the multi-function button on Soundsync twice to enter Bluetooth pairing mode, then connect the first device to your Soundsync. Make sure the connection is successful before continuing.
- Press the multi-function button on Soundsync twice to re-enter Bluetooth pairing mode.
- Connect the second device to your Soundsync.
- Once the second device is connected to Soundsync, open the Bluetooth pairing list on the first device, look for “Soundsync A3352” and then select it to connect.
- Restart Soundsync. Soundsync will automatically connect to the second device, but you must repeat step 4 to manually complete the connection with the first device.
Soundsync can only play music on one device at a time. Pause the music on the device that is currently playing before you play music on the other device.
Charge your Soundsync
- Soundsync switches on automatically during charging.
- Use the included micro USB cable to charge your Soundsync and make sure it is fully charged before first use.
- When not in use, store your Soundsync in a cool place.
Specifications
- DC input: 5V, 1.5A
- Battery capacity: 180mAh
- AUX playtime: 12 hours
- Charging time: 2 hours
- Bluetooth version: V5.0
- Support format: HFP A2DP AVRCP
- Size : 50 × 29 × 10mm / 1.9 × 1.1 × 0.4 in
- Weight (without packaging): 12.2 g / 0.4 oz
- Operating temperature range: 14°F to 131°F / -10°C to 55°C
- Range: 10 m / 33 ft
For more manuals by Anker, visit ManualsLibraryy
Anker Soundsync A3352 Bluetooth Receiver-FAQs
How do I connect my SoundSync A3352?
Press the multi-function button twice to enter Bluetooth pairing mode. Connect your first device and ensure the connection is successful. To pair another device, press the button twice again to re-enter pairing mode.
How do I pair my Anker Bluetooth adapter?
Press and hold the multi-function button for 2 seconds to enter Bluetooth pairing mode. Alternatively, double-click the button to activate pairing mode. Place the Soundsync near your headphones or speaker and wait about 30 seconds for the connection.
Why is the blue light flashing on my Anker speaker?
A flashing blue light indicates the speaker is in pairing mode. Once connected, the light will remain steady.
What is a Bluetooth audio sink?
A Bluetooth audio sink is a device that receives and plays audio from a Bluetooth source, such as a phone or computer. Speakers and headphones are common examples of Bluetooth audio sinks.
What is LG Sound Sync?
LG Sound Sync allows you to control the volume of a connected LG audio device using your TV remote. If the soundbar’s auto-power feature is enabled, it will turn on and off along with the TV.
What is Roav F2 Bluetooth?
The Roav F2 adds Bluetooth connectivity to cars without built-in Bluetooth. It transmits audio from your phone via FM radio frequencies, allowing you to stream music and make hands-free calls through your car’s sound system.
Why is my Anker Bluetooth not working?
Ensure your headphones and device are within Bluetooth range and away from interference. If the connection fails, try reconnecting by double-clicking the power button while the device is on.
How do I set up a Bluetooth receiver?
Turn on Bluetooth on your device. Press and hold the Bluetooth button on the receiver’s remote for at least 3 seconds to enter pairing mode. Select the receiver from the list of available devices.
How do I check if my Bluetooth adapter is working?
On Windows, open Quick Settings by selecting the Network, Sound, or Battery icons in the taskbar. Look for the Bluetooth option—if it says “Not connected,” your device is not paired with any Bluetooth accessories.