Back Bay Audio Tempo 30 Truly Wireless Earbuds
Pairing for the First Time
- Remove any protective plastic from the bottom of the earbuds
- Place the earbuds in the charging case until you see a white light
- Remove both earbuds from the charging case, and they will automatically turn on and connect to each other
- Go to the Bluetooth menu on your device and select “Back Bay Tempo 30.”
- If your phone shows a Bluetooth Pairing Request, press “Pair”
Fixing a Connection Issue
- Open your phone’s Bluetooth settings, find “Back Bay Tempo 30,” and click “Forget This Device.”
- Place earbuds in the charging case
- Press both earbuds for 8 full seconds until you see the light on each earbud turn blue.
- Lift your fingers, then double-tap each bud
- A white light will flash if the reset is successful
- Remove the earbuds from the case. Then find “Back Bay Tempo 30” in your Bluetooth menu and press both buds until they connect to each other
If you don’t see it in your Bluetooth menu, turn your phone’s Bluetooth off and on again
Controls
TO POWER OFF: Pause Music, Then Hold for 5 Sec
Phone controls
Enter Pairing Mode
When the earbuds are not connected to any device, they will automatically go into pairing mode.
To connect to a new device for the first time, just disconnect your earbuds from your previous device, and they will go into pairing mode. Then your new device will be able to discover the earbuds.
Positioning
Place the earphone in your ear with the logo facing out. Rotate the earbud until you find a comfortable position.
Choose the Right Ear-Tip
GREAT FIT = GREAT BASS
If you are having trouble putting on the tips, go to the site below for help:
How to Charge
Charging the Earbuds
- Simply place the earbuds in the charging case
- When the earbuds are charging, a white light will shine from the hole on the side of the earbuds
- When the earbuds are fully charged, the light will turn off
- The case will recharge the earbuds 3 full times
Charging the Case
- Using the included USB_C cable, connect the charging case to a power source.
Do not use a charger that exceeds 5V 1A. A higher-powered charger may damage the battery.
Charging Status
The LED lights on the inside of the case will shine to show the battery status when you plug in the case or place the earbuds in the case.
No-Lag Movie Mode
Tap either earbud 4 times to turn on the No-Lag Movie Mode.
This mode removes the lag when you are watching videos and playing games.
NOTE: When the movie mode is on, your wireless range will be slightly shorter.
Helpful Charging Tips
- If the earbuds don’t turn off when you put them in the case, it means the case is fully out of battery and needs to be recharged.
- You can leave the charging case plugged in as long as you’d like and it won’t over-charge. We have designed the electronics to prevent over-charging.
Please read this manual carefully before use.
Warning
To prevent possible hearing damage, do not listen at high volume levels for long periods. For your own safety, please be aware of your surroundings when using these headphones.
Safety Warnings
Do not place near any open flames.
Dispose of batteries responsibly and be aware of the environmental effects of battery disposal. Do not expose batteries installed to excessive heat.
1-Year Warranty
Thank you for purchasing the Tempo 30 wireless earbuds!
You are covered by our 1-Year Warranty. Register for your free warranty at:
If you have any issues, please feel free to email
For more Manuals by Back Bay, visit ManualsLibraryy