Bebird EarSight Cleaner Visual Ear-Clean Rod
Open bebird C3
- Open bebird APP and select bebird C3
- Press and hold the power button to turn on the ear cleaning rod
- Press and hold the power button for 1 second for power on
Connect product WiFi
- Connect Product Wi-Fil “bebird-XXXX”
- Back to bebird APP Press the Start to use it.
Accessory replacement
- Spinning to open the fixed ring to replace the ear spoon Insert the buckle of ear spoon, spinning to tighten the fixed ring
- The ear spoon must be assembled in place before using to prevent falling off.
Accessory
- Q-elastic ear spoon × 1
- The world’s first version of combined PC with silica gel
- The world’s first version of combined PC with silica gel
- Transparent ear spoon × 4
- Dig the ear canal deeply and swap out a large amount of earwax
- Dig the ear canal deeply and swap out a large amount of earwax
Product size
Hazardous substance
Troubleshooting
Attention
- When cleaning the lens, please wipe it carefully with a professional alcohol cotton swab.
- Please don’t use it while you are moving, and protect from being hit by others.
- This product is unsuitable for children under 3 year old.
- It is forbidden for children to use this product alone in order to avoid accidental harm.
- Please do not put the product in liquid to avoid damage.
- The product built-in rechargeable lithium battery, so it must be charged once a month If it is not used frequently.
- Avoid product exposure to sunshine directly, especially the accessories, in order to avoid softening.
- During using it, the temperature of the product will rise slightly (up to 35 degree), please rest assured to use.
- To ensure the best experience, please keep the child in a sitting position and operate the product horizontally.
Product parameters
- Brand: bebird
- Product Name: Smart visual ear cleaning rod
- Model: C3
- Rod weight: 16g
- Network standard: IEEE 802.11b/g/n
- Antenna: Internal FPC antenna
- Working frequency: 2.4Ghz
- Image transmission rate: 20fps
- Image sensor: CMOS
- Environment temperature: -10 ~ 45 °C
- Battery: 250mAh lithium battery
- Battery life: About 70 minutes
- Charging time: 1h
- Input current: DC 5V 300mA
- Lens diameter: 3.5mm
- Optimum focal length: 1.5 – 2cm
- Pixel: 3М
- Gyroscope: 3 axis
For more manuals by Bebird, visit ManualsLibraryy
Bebird EarSight Cleaner Visual Ear-Clean Rod-FAQs
How long does it take to charge the Bebird device?
The Bebird cleaner charges fully in about 1 hour.
What is the default password for the Bebird network?
The default password to connect to the Bebird network is 12345678.
How do I connect my Bebird cleaner to my phone?
Turn on the Bebird device, which will emit its own Wi-Fi signal. Connect your phone to this signal through the Bebird app to begin using the device.
How long does the smart ear cleaner take to charge?
It typically takes around 90 minutes to fully charge the device.
Is the Bebird app safe to use?
Yes, the Bebird app does not share user data with third parties, according to the developer.
What should I do if the Bebird device is not connecting?
Try these steps:
1. Reinstall the app.
2. Power off your phone and Bebird device, then turn them back on.
3. Disable and re-enable Bluetooth before attempting to pair again.
Are ear cleaners like Bebird safe to use?
When used properly, Bebird is designed to be safe. However, improper use or unsanitary tools can introduce bacteria or fungi into the ear canal, increasing the risk of infection.
How long does it take for earwax to form?
The natural earwax formation process can take a couple of months, varying from person to person.
Can I use the Bebird cleaner while it’s charging?
Yes, the Bebird cleaner can be used while it is plugged in and charging.