Blendtec Designer Series Blender
IMPORTANT SAFEGUARDS
Read all instructions carefully before using the Blendtec® blender. Following these instructions will help prevent injuries and damage to the machine, which will ensure that you have the best possible experience with the blender.
Avoid contact with moving parts.
- ALWAYS keep fingers, hands, hair, and clothing away from all moving parts.
- ALWAYS keep all utensils away from the drive socket and blender jar blade during operation, as utensils may damage the blade or the blender jar.
- NEVER put hands into the blender jar or add substances by hand when the blender jar is on the motor base.
- NEVER touch the blade with your fingers, whether it is on or off the motor base.
- NEVER place a jar into the drive socket if the blender motor is operating.
- DO NOT rock or remove the blender jar during operation.
These precautions will help prevent personal injury and/or damage to the blender.
Never operate the blender if it appears damaged.
If the blender malfunctions, call an authorized Blendtec service agent immediately. If it is dropped or damaged in any way, return the blender to a Blendtec service agent immediately for examination, repair, electrical or mechanical adjustment, or possible replacement.
Never operate a blender on liquid.
To protect against the risk of electrical shock, do not put the motor base in water or other liquids. Do not use the blender outdoors where it may get wet. This will void the warranty.
Never put non-food items into a jar.
Utensils, rocks, glass, and other non-food items are dangerous if placed in the jar. Damage caused by such foreign objects will void the warranty. Keep hands and utensils out of the jar while blending to reduce the risk of severe injury to persons or damage to the blender.
Utensils may only be used when the blender is not running.
Never operate the blender without the lid in place.
This product should NOT be used for more than 5 continuous minutes.
Never operate the blender using attachments not sold by Blendtec.
Use of any unauthorized attachments may cause fire, electric shock, and/or injury and will void the warranty.
The blender jar must be properly in place while the appliance is operating.
Warning: Do not blend hot liquids or other hot ingredients.
Starting blend cycles with boiling or very hot liquids may result in burns or cause the lid to blow off.
Use caution when blending on the hot/soup cycle.
When blending on the Hot Soup cycle, the friction of the blade will heat the contents. The vented lid will allow pressure relief. Be careful not to come in contact with any steam coming from the clear center lid.
Power cord precautions
- NEVER operate with a damaged cord or plug. If the supply cord is damaged, it must be replaced by the manufacturer or an authorized service agent to avoid a hazard.
- DO NOT permit the cord to hang over the edge of the work surface.
- NEVER use an extension cord with the unit.
- Unplug the blender motor when not in use, before changing blender locations, or cleaning.
Never attempt to repair the blender base.
Never remove the blender motor cover. The blender motor does not contain self-adjustable or serviceable parts. A qualified service agent must make all service adjustments. Removing the cover or attempting to service the blender will void the warranty.
Power off the machine when not in use.
The power switch on all Classic blenders and the Pro750 is located on the back of the blender motor cover. The off button for all Designer Series and Professional 800 blenders is found in the top right corner of the touchpad.
Avoid touching the blender drive socket or jar shaft after use!
The blender drive socket and jar shaft may become very hot after blend cycles.
Special safety instructions regarding the Blendtec Go accessory.
- NEVER operate the Blendtec GO accessory unless the cup is securely attached to the micronizer.
- NEVER use the soup cycle or operate the blender for more than 60 seconds with the GO accessory attached.
Safety
This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or a lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
Above Counter Installation
- Select a location that is near an electrical outlet. Also consider proximity to ingredients, as well as available counter space.
- Place the blender on the counter in a spot where the air intake vents on the sides and the exhaust on the back of the blender are unobstructed.
- Ensure there is enough room above and around the unit to allow unhampered movement of the sound enclosure, if applicable.
- Plug the unit into an outlet with appropriate electrical protection.
- For Pro 750 In-Counter installation instructions, please see the online user manual: https://www.blendtec.com/support/guides
This blender is intended for home use only! Any use of this blender for commercial purposes voids all warranties.
Never operate the blender with more than the marked capacity of the jar.
BLENDER BASICS
VERSATILITY
Blendtec is more than a blender— it can be used for a number of other applications in the kitchen as well, including:
Blending
This basic function can be used to make smoothies, batters, mixed drinks, whipped cream, and salad dressings.
For basic blending, select the desired speed and run until the preferred consistency is reached.
Wet Grinding
The blender acts as a wet grinder when grinding foods that contain moisture, such as soaked grains and raw meat.
Use the pulse feature to grind to the desired consistency.
Be sure to clean the blender thoroughly after grinding raw meat to avoid cross-contamination.
Dry Grinding
Crack or grind legumes or whole grains for use in hot cereals, baked goods, and breads.
To grind grains, pulse to the desired degree of fineness or use the manual speed controls, blending longer for finer grains.
Dry grinding is also used to make bread crumbs or crush graham crackers. Pulse until the desired consistency is reached.
Juicing Whole Foods
Whole food juice delivers all the health benefits of both the juice and the fiber found in the fruit or vegetable.
To create whole juices, blend on high for 50 seconds.
Wet Chopping
Wet chopping is an easy way to chop ingredients such as carrots and celery. Simply add water with the food item you want to chop to help the ingredients circulate in the jar. After you finish chopping, strain out your chopped ingredients. You can also use the leftover liquid for smoothies, sauces, and soups.
For wet chopping, Pulse 8–12 times or until the desired consistency is reached.
Dry Chopping
The blender can chop nuts, hard cheeses, coconut, and other hard ingredients easily, quickly, and with less mess to clean up.
When dry chopping, use the pulse feature or blend at a medium-high speed. For best results, chop ingredients in small batches.
Making Frozen Treats
The blender can make soft-serve ice cream, sorbet, frozen yogurt, and more. For frozen recipes, blend on low for 15 seconds, then blend on medium to high until the desired consistency is reached.
Batters
After grinding grains, the same jar can be used to combine flour and wet ingredients into batters.
LOADING THE JAR
For best results, always load the ingredients into the jar in this order:
- Liquids (e.g., water, juices, milk)
- Soft solids (e.g., peanut butter, bananas, and other soft fruits, powders)
- Hard, dense, or frozen items (e.g., carrots, frozen strawberries, ice)
Loading the jar properly helps reduce cavitation. For more information on cavitation, please refer to the Troubleshooting section.
Note: When using the Blendtec GO accessory, reverse the loading order, adding ice and hard ingredients to the jar first, then soft ingredients and liquids.
CLEANING THE JAR
Before using the jar for the first time (and each time after blending), follow these easy cleaning tips:
- Add a cup (240 ml) of water and a drop of dish soap to the jar.
- Place the jar on the blender; press Clean cycle or pulse for 10 seconds.
- Remove and rinse with warm water.
To clean the motor base, simply wipe with water or mild dish soap. Using other chemicals may cause cosmetic damage to the blender base.
When using the Blendtec GO accessory, be sure to remove the gasket from the micronizer and clean both thoroughly after each use.
BLENDERS & ACCESSORIES
Each of our jars and accessories is engineered to make life easier in the kitchen. Our products not only provide smooth blends but are also designed to provide safe operation and easy cleaning.
Classic
Commercial-grade power and incredible versatility combine to bring you the Classic, the ultimate all-in-one appliance.
- Classic motor base
- BPA-free jar with vented lid
Professional
Bring the absolute best commercial blender into your kitchen.
- Professional motor base
- BPA-free jar with vented lid
Designer
The Designer offers advanced blending technology and a wide range of easy-to-use features.
- Designer motor base
- BPA-free jar with vented lid
FourSide™ Jar
The FourSide is perfect for average-sized blends of smoothies and drinks.
It’s also ideal for:
- Ice cream
- Grinding grains
- Soups
- Dips and batters
Twister™ Jar
The Twister jar blends even the thickest recipes with ease!
Perfect for:
- Bread & cookie crumbs
- Nut butters
- Hummus
- Baby food
Wildside+™ Jar
The WildSide+ jar features two vertical ridges on the interior walls to disrupt the blending pattern even further and accelerate the blend.
- High-volume recipes
- Smoothies
- Dips and Batters
- Whole Juice
Blendtec Go™
The Blendtec Go allows you to blend in a disposable cup or in the convenient portable container. Ideal for:
- Smoothies
- Dips
- Protein Shakes
Mini Wildside™ Jar
The Mini Wildside is a smaller version of the Wildside + Jar.
Small but mighty, it’s perfect for:
- Smoothies
- Protein shakes
- Juices
- Batters
QUICKSTART – TOUCHPAD ICONS
Blend cycles are timed cycles designed for specific types of blends. These one-touch cycles speed up, slow down, and shut off automatically for ease of use. Blenders may feature some of the following pre-programmed cycles and settings to accommodate a wide range of recipes and functions.
Dips
Dressings, dips, sauces, batters
Whole Juice
Juices, green drinks
Smoothies
Fruit smoothies, green smoothies
Mixed Drinks
Mixed drinks, milkshakes
Hot Soup
Soups, hot chocolate, syrups, and fondues
Batters
Sauces, dips, dressings, batters
Ice Cream
Ice cream, frozen yogurt, sorbets
Clean
Automatic cleaning cycle
Mode
Switch between manual touch to preprogrammed blend cycles
Speed Up
Manually increase the speed of the blend
Speed Down
Manually decrease the speed of the blend
Stop
Used to manually stop the blend cycle
Incremental Speed
Cycles that blend at Lo, Med-Lo, Med, Med-Hi, and Hi speeds
Pulse
Used to quickly stir, chop mince at a high speed
Timed Cycles
Hot soups, batters
+10
Adds 10 seconds to the cycle
Capacitive Touch Sliders
The capacitive touch slider allows you to fine-tune the speed of the blender. Simply slide your finger to the right to increase the blender’s speed or to the left to decrease the speed.
FAQS AND TROUBLESHOOTING
Louder Than Normal Grinding Noise (Jar or Motorbase)
Remove the jar from the base and run a normal smoothie cycle. This will allow you to listen to the motor alone and identify any abnormal sounds. If no abnormal sounds are identified, the jar may be the issue. Please refer to the section on troubleshooting the jar.
“E-02 Overload” Error
If the blender shows an “E-02” or “Overload” error, let it rest unplugged for five minutes and then run it without the jar. If the motor runs normally without the jar, add one cup of water to the jar and replace it in the blender. Run the smoothie cycle. If the problem persists, call Customer Care.
No Power
Check the main power switch on the machine. Be sure it is in the on position. If the problem persists, plug the unit into a different outlet. If there is still no power, contact Customer Care.
“Overtemp” Error
Unplug the blender and let it rest for 5-10 minutes. Run the blender on the smoothie cycle. If the problem persists, contact Customer Care.
Smoking or Burning Smell
A smoking or burning smell may occur on occasion. If you have questions, please contact Customer Care.
Troubleshooting the Jar
After ensuring that the shaft has had time to cool (minimum three minutes), grip the metal shaft at the bottom of the jar with your fingers and twist. The shaft should make one smooth, silent revolution with little resistance. If you experience a different result, please refer to the FAQ section on our website (www.blendtec.com/faq) or contact Customer Care.
Touch Error
Wipe the touch pad with a dry, non-abrasive cloth and then try pressing the button again. Make sure firm fingertip contact is made with the intended selection. If the error persists, unplug the unit and allow it to sit for 20 minutes. If the issue continues, contact Customer Care.
Blending Problems
If it appears that the blend isn’t moving and the blade is spinning, a bubble of air may have formed within the blend. This is commonly
called cavitation. If this happens, follow these steps: (1) stop the blend cycle, (2) remove the jar from the blender base, (3) scrape the inside walls of the jar with a spoon or add a little warm water to the blend, (4) remove the spoon, replace the jar, and resume the blend.
The blender works best with a 1:3 liquid-to-solid ratio. If you are experiencing frequent cavitation, try blending the liquids with the most fibrous or dense items first (e.g., almond milk and dates) to make the base or paste. Add the remaining ingredients to finish the blend.
If these troubleshooting steps do not resolve the issue, please contact Customer Care. Contact information can be found at
www.blendtec.com/company/contact
For more Manuals by Blendtec, visit ManualsLibraryy