Breville BBL620SIL Fresh and Furious Blender User Manual

Breville BBL620SIL Fresh and Furious Blender

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE

Remove any packaging material and promotional stickers before using the blender for the first time.
To avoid a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of this appliance
Do not place the blender near the edge of a countertop or table during operation. Ensure that the surface is level, clean and free of water and other substances. Vibration during operation may cause the appliance to move.
Do not place the appliance on or near a hot gas or electric burner, or where it could touch a heated oven.
Always ensure the blender is properly assembled before use. Refer to assembly and operation instructions.
Use only the blender jug and lid supplied with this blender. The use of attachments or accessories not manufactured or
specified by Breville may cause risk of fire, electrical shock, or injury.
Always ensure the blender is assembled properly before using. Ensure the blender lid is firmly positioned on the blender jug before operating.
Do not leave the blender unattended when in use.
Always ensure the appliance is turned off by pressing the ON | OFF button on the control panel. Then unplug the cord. Make sure the motor and blades have completely stopped before attempting to move the appliance, or when not in use and before disassembling, cleaning and storing.
Avoid contacting moving parts.
If food becomes lodged around the blender blade, turn the blender off by pressing the ON | OFF button on the control panel. Then unplug the cord. Make sure the motor and blades have completely stopped before removing the jug from the motor base. Use a spatula to dislodge or stir the food before continuing. Do not use fingers as the blades are sharp.
Keep hands, fingers, hair, and clothing as well as spatulas and other utensils away from the blender jug during operation
Never place your fingers, hands or utensils inside the blender jug without unplugging the appliance from the power outlet.

BREVILLE ASSIST® PLUG

Your Breville appliance comes with a unique Assist® Plug, conveniently designed with a finger hole to ease removal from the power outlet. For safety reasons, it is recommended you plug your appliance directly into its own electrical outlet on a dedicated circuit separate from other appliances. If the electric circuit is overloaded with other appliances, your appliance may not function properly. Use in conjunction with a power strip or extension cord is not recommended.

MADE WITH EASTMAN TRITAN™ COPOLYESTER

Key benefits of Eastman Tritan™ copolyester

Your blender is made with Eastman Tritan™ copolyester, a tough, BPA-free polymer used to make houseware products that can withstand extreme use and repeated dishwasher cleaning. Products made from Eastman Tritan copolyester are impact-resistant and shatter-resistant, remaining clear and durable even after hundreds of dishwasher cycles.

Key attributes:

Dishwasher durable
Tough
BPA free
Temperature resistant
Odor, taste, and stain-resistant

Components

A. Inner measuring lid
For adding ingredients while blending. Dishwasher safe, top shelf only.
B. Breville Assist™ Lid
Unique ring pull design ensures the lid is easy to remove yet sealed tightly during operation. Dishwasher safe, top shelf only.
C. Large 50oz (1.5L) Eastman Tritan™ copolyester Jug
Unique dual ribs continually pass ingredients onto the blades for well-blended results. Dishwasher safe.
D. Kinetix Blade and Bowl system
Revolutionary blade technology for smooth food processing results.
E. Blender base
For long-lasting, professional performance.
F. SMOOTHIES and
AUTO PULSE/ICE CRUSH programs Optimise the blender’s capabilities to create great smoothies and drinks.
G. Electronic 5-speed control
Electronic controls ensure that the RPM speed is maintained for consistent results every time.
H. Auto Clean Program
Removes most of the ingredients from the jug walls and the blade.

Functions

BEFORE FIRST USE

Before using your blender for the first time, remove any packaging material and promotional labels. Wash the lid, inner lid, and blender jug (refer to “Care & Cleaning) in warm, soapy water with a soft cloth. Rinse and dry thoroughly. The blender jug may be washed in the dishwasher. The lid and measuring cup can be washed on the top shelf in your dishwasher. The motor base can be wiped with a damp cloth. Dry thoroughly.

NOTE: The blending blades are extremely sharp. Avoid any contact with fingers and hands.

ASSEMBLING AND ATTACHING THE BLENDER

Step 1
Place the motor base on a flat, dry surface such as a countertop. Ensure that the motor base is turned off at the ON | OFF button and the power cord is unplugged.
Step 2
With the blender jug in the upright position, place it on the motor base. The handle of the blender can be positioned on the left or right side of the appliance.
Step 3
Add food or liquid into the blender jug, ensuring not to exceed the ‘MAX’ mark. Place the blender lid firmly into position on the top of the blender jug. Insert the clear inner measuring lid into the blender lid and turn clockwise to lock into position. Your blender features a Breville Assist™ Lid. This allows the lid to fit tightly onto the blender jug, avoiding displacement during operation. The ring pull design allows the user to easily remove the lid.
Step 4
Plug the power cord into a 120V power outlet.
Step 5
Press the ON | OFF button on the far left of the control panel to turn the blender on. The ON | OFF button will illuminate and flash. The LCD timer screen will illuminate with ‘00’ displayed.
- A flashing light indicates ready to operate. Avoid any contact with movable parts while in operation.
- Do not fill the blender jug above the ‘MAX’ mark.

MANUAL SPEED SELECTION

ON | OFF

The ON | OFF button powers the unit into READY mode.

Speed Control Selection

There are 5 electronic speed buttons from MIX through to LIQUIFY. MIX combines more delicate foods with a folding motion, and is good for combining wet and dry ingredients. LIQUIFY is the fastest setting and is ideal for breaking down ingredients to prepare soups, make cocktails and other finely blended mixtures. Select the required speed (1 to 5) by pressing the corresponding speed button. The blender will start to operate, and the selected speed button will illuminate. The ON |OFF button will illuminate and cease to flash. The LCD timer screen will start counting up in one-second increments until 60 seconds is reached. When 60 seconds is reached, the blender will automatically stop blending, and the selected speed button illumination will turn off. This is a safety feature that restricts wear on the motor. The ON | OFF button will illuminate and flash. After a few seconds, the LCD timer screen will revert to ‘00’.

To stop blending at any time, press the selected speed button. The ON | OFF button can also be pressed, but this will also turn the appliance off, and all illuminations will go out.
The speed can be changed at any time during the blending process. Each time a new speed is selected its button will illuminate and the previous speed button illumination will go out.

Count-up Timer

The blender timer counts up in seconds as it blends on one of the 5 electronic speeds. When using the timer this way, the blender will automatically stop after 60 seconds.

PRESET PROGRAMS

Your blender features three additional functions, ‘AUTO PULSE / ICE CRUSH’, ‘GREEN SMOOTHIE’ and ‘SMOOTHIE’. These three pre-programmed cycles automatically adjust the blending time and speeds to optimize blending results.
Select the required function by pressing the corresponding function button. The blender will start to operate and the selected function button will illuminate. The ON | OFF button will illuminate and stop flashing. The LCD timer screen will start counting down in one-second increments until ‘00’ is displayed. Press any pre-set program button to activate the program – press the button again to deactivate.

GREEN SMOOTHIE (60 seconds)

Optimized to break down whole hard ingredients like fruits, leafy greens and seeds, and allows them to blend together with other soft and liquid ingredients.

SMOOTHIE (60 SECONDS)

This program has been optimized to combine and aerate frozen and liquid ingredients. The SMOOTHIE function has a unique processing technique that blends the denser ingredients at high speed, then decreases in speed to combine ingredients together. The programming also circulates the ingredients for maximum aeration and creamy texture.

AUTO PULSE / ICE CRUSH (60 SECONDS)

Optimized to crush ice, and also ideal for processing other foods that need sudden bursts of power. It also encourages ingredients to move around the jug by manually controlling pulse cycles. The maximum amount of ice cubes the blender can blend at any one time is 1 cup (250g) of ice.

AUTO CLEAN

Use to remove most of the ingredients from the blender walls and blades. Add 2 cups of warm soapy water to the blender jug and press the

AUTO CLEAN button.

For harder to clean, sticky or thick ingredients, add ½ teaspoon of liquid dish detergent for extra cleaning power. For best results, clean the blender jug this way immediately after use.

NOTE: If the blender is running and a different button is pressed, the speed will automatically switch to that program without stopping.
WARNING: Never place anything other than food and liquids in the blender while the motor is running.

NOTE: Use the AUTO PULSE / ICE CRUSH button when the food that is being processed is too thick or coarse to circulate within the blender jug. At the end of use, always ensure the blender is turned off by pressing the ON | OFF button on the control panel. Then unplug the cord. Ensure the motor and blades have completely stopped before attempting to move the appliance, or when the blender is not in use, and before disassembling, cleaning, and storing.

Hints & Tips

If the volume (while blending) is below the maximum mark, the inner measuring cap can be removed, and oils/liquids can be added while the blender is in use.
Run the blender only for the appropriate amount of time required – do not overblend ingredients.
Do not exceed the maximum mark when adding foods and liquids into the blender.
Ingredients may stick to the sides of the blender jug. To push food back onto the blades, turn the blender off and unplug it from the wall. Use a plastic spatula to scrape down the sides of the jug, and continue blending.
If any moisture or liquid appears on top of the motor base during blending, turn the blender off and unplug at the wall. Remove the blender jug and wipe the motor base immediately with a dry cloth or paper towel.
A speed or function can be selected at any time, even while the blender is running. Press the new speed or program, and the blender will change operation immediately.

Do’s

Use the BLEND function for drinks, cocktails, emulsions such as mayonnaise, dressings, marinades and foods that require mixing until combined, also use for batters, pureeing soups and aerating liquids.
Use a combination of the BLEND and AUTO PULSE / ICE CRUSH functions to process the foods being blended.
Use the SMOOTHIE function to blend fruits, ice cream, and yogurts into thick smoothies, blended drinks, and milkshakes.
Use the AUTO PULSE / ICE CRUSH function with short bursts of power and when blending drinks containing ice cubes or frozen fruit.
Ensure all foods are cut into cubes (approx. 1 square inch) where appropriate to achieve an even result.
Do not put more than 2 cups (473g) of warm ingredients into the blender jug before blending commences. After the blending process has begun and the blades are turning, you may slowly add another 1½ cups of ingredients through the
opening in the lid if desired.
Thick mixtures puree more efficiently if your blender is ¼ to ½ full.
When using several ingredients, place liquid ingredients in the blender jug before solid ingredients, unless specified in the recipe. When blending thick or dry mixtures, it may be necessary to stop the blender and scrape down the sides of the blender jug with a plastic or rubber spatula, once or twice during blending.

Don’ts

Do not use metal utensils as they may damage the blades or the blender jug.
Do not blend heavy mixtures for more than 10 seconds. For normal blending tasks, for example, mayonnaise, dressings etc., do not operate for longer than 60 seconds at a time without turning off the blender and stirring the ingredients, and then continue blending.
Do not operate the blender without having the blender lid in place. To add additional ingredients while blending, remove the inner lid and place ingredients through the opening in the lid.
Do not place any objects, other than food or liquid, into the blender while the motor is running.
Do not use the blender jug to store food.
The blender will not knead dough or mash potatoes.
Do not remove the blender jug while the blender is operating. Always make sure the blender is turned off by pressing the ON | OFF button and unplugging the power cord from the power outlet.
Do not overload the blender with more than the specified quantity of ingredients, as doing so could cause the motor to stall. Turn the blender off by pressing the ON | OFF button on the control panel and unplugging the cord. Remove a portion of the mixture from the blender jug before continuing.
Do not place hot or boiling ingredients into the blender; allow them to cool before placing them into the blender jug.
Do not place the blender near the edge of a countertop or tabletop during operation. Ensure that the surface is level, clean, and free of water, flour and other substances. Vibration during operation may cause the appliance to move.

Blending Chart

NOTE: This blending chart should be used as a guide only.

Troubleshooting

Care & Cleaning

Jug And Lid

In order to keep your jug clean and avoid food drying on the blades and jug, follow the steps below as soon as possible after use

Rinse most of the ingredients off the jug and lid.
Add 2 cups (473g) of warm water and press the AUTO CLEAN button. If thick or sticky ingredients require extra cleaning power, add a few drops of liquid dish detergent.
Rinse the jug and lid again and/or wash separately in warm, soapy water with a soft cloth or bottle brush.
It is most effective to clean the jug immediately after use.

WARNING

Oils in citrus rind can damage the material of your blender jug if exposed to it for a longer period. Always clean your blender jug immediately after processing citrus rind.

Motor base

To clean the motor base, wipe with a soft, damp cloth, then dry thoroughly. Wipe any excess food particles from the power cord.

Cleaning agents

Do not use abrasive scouring pads or cleaners on either the motor base or the jug, as they may scratch the surface. Use only warm, soapy water with a soft cloth.

Dishwasher

The blender jug and lid can be washed in the dishwasher on a standard wash cycle. The jug can be placed on the bottom shelf, but the lid and inner measuring cap should be washed on the top shelf only. Be aware that washing parts regularly in the dishwasher can shorten their life due to prolonged exposure to harsh detergents, hot water, and pressure.
Stubborn food stains and odors. Strong-smelling foods such as garlic, fish and some vegetables, such as carrots, may leave an odor or stain on the blender jug and lid. To remove, soak the blender jug and lid for 5 minutes in warm, soapy water. Then wash with a mild detergent and warm water, rinse well, and dry thoroughly. Store the jug with the lid off.

Storage

Store your blender upright with the blender jug assembled on the motor base or beside it. Do not place anything on top. To allow air to circulate, keep the lid off.

For more manuals by Breville, visit ManualsLibraryy

Breville BBL620SIL Fresh and Furious Blender User Manual