BRINKS EZ-Dial Indoor Timer 42-1006
FEATURES
- 1 polarized (2 pole) socket outlet
- Turns lights/appliances ON and OFF at programmed daily settings
- Programmable in 30 minutes intervals
- Max. 24 ON/OFF per day
- CFL Compatible
- Manual Override switch
WARNINGS
The electrical system and the method of connecting this timer to the system must be in accordance with local, state, and national electric codes.
- This unit is to be connected to a 125V, 60Hz power source only.
- Total Capacity: 15A 1875W Resistive, 1250W Tungsten (Lighting). 1/2 HP. Do not exceed rated capacity.
- FOR INDOOR USE ONLY.
- Do not attempt to disassemble unit. There are no serviceable parts inside.
RISK OF ELECTRIC SHOCK
- Keep children away.
- Unplug timer before cleaning.
- Do not use in wet locations.
RISK OF FIRE: Do not use to control appliances that contain heating elements (Cooking appliances, heaters, irons, etc.)
CAUTIONS
- Do not use with any appliance which exceeds the capacity of the Timer.
- Always ensure that the plug of any appliance is fully inserted into the Timer.
- If you need to clean the Timer, remove from the mains and wipe with a dry cloth. Do not immerse in water or any liquid.
- Fan heaters and heaters with exposed elements should not be left unattended, and it is recommended that these type of appliances are not to be connected to timers.
INSTRUCTIONS
- Turn the dial clockwise until the current time lines up with the “Time Now” indicator arrow.
NOTE: The dark area on the dial denotes nighttime hours. The white area denotes daytime hours. - Set the switch to the TIMER ON position.
- With your finger pull up all the tabs. Determine your desired ‘ON’ period and press down all tabs corresponding to the required ‘ON’ period. For example, if you want your appliance to turn ‘ON’ at 6:00pm and ‘OFF’ at 10:00pm, push down all the tabs between the 6pm and the 10pm in the BLACK section on the dial.
- Connect appliance to the timer and plug timer into power source and making sure the appliance is turned on.
- The pre-set On/Off commands can be interrupted by using the manual override switch located on the top of the unit. When switched to the OUTLET ON position, the connected appliance is switched on permanently. To reactivate the timer’s control of the appliance, turn the appliance switch on and set the timer’s override switch to TIMER ON.
FULL LIFETIME WARRANTY
This product is fully warranted to be free of defects in material and workmanship for the life of the product. If a defect in material or workmanship occurs, call 800-562-5625 for instructions on how to have it replaced or repaired free of charge. This warranty is null and void if the product was used for purposes for which it was not designed, is abused, misused, modified or improperly installed, operated, maintained, and/or repaired.
NOT LIABLE FOR INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific rights, and you may also have other rights that vary from state to state.
For more manuals by BRINKS visit, ManualsLibraryy
BRINKS EZ-Dial Indoor Timer 42-1006-FAQs
What is the working principle of a timer?
A timer works by receiving an input signal and delaying the output signal after a set time, activating the connected device after the delay.
How does an automatic light timer work?
An automatic light timer uses an integrated clock to turn lights on and off at preset times, helping to automate lighting based on your needs.
How do I set up an indoor timer?
Plug the timer into a wall outlet, then connect your device. Turn on the device, and the timer will power it on or off based on your programmed settings.
How do I work a timer plug?
Pull all tabs out, then push down or in the tabs corresponding to the times you want your devices to turn on or off. Ensure all other tabs are pulled out.
How do I set an outdoor timer with pins?
Push the tab closest to your desired “on” time, then the one closest to your “off” time. Push in the tabs in between to set your desired on/off schedule.
What is a digital timer?
A digital timer is an electronic device that measures time accurately. It’s easier to use and more precise than mechanical timers, offering digital time settings.
How do I set a Brinks timer model 42-1005?
Press down the tabs on the dial corresponding to the “ON” times. For example, push the tabs between 6:00 PM and 10:00 PM to set the timer to turn on at 6 PM and off at 10 PM.
Can I use the Brinks system without service?
Some equipment will work without service, but home security devices may display an error message, and keypads may beep periodically without professional monitoring.
How do I check my Brinks balance?
Sign up for Anytime Alerts, then text “BAL” to 22622 to receive your card account balance. You can also call Brinks at 1 (877) 849-3249.
Does Brinks offer benefits?
Brinks offers health insurance, dental, vision coverage, 401(k), training, and competitive wages to full-time employees.