CyberPowerPC C305B Gamer Xtreme VR Gaming PC Quickstart
QUICK START GUIDE
CYBERPOWERPC takes great pride in delivering you a high-quality product, so please follow the steps below to ensure your system is properly prepared for operation before turning on your computer.
Step 1: Packaging Foam Removal
(If Installed With Your Purchase)
Some systems may include a protective foam inside the case that must be removed before turning on the computer.
- Remove screws from left side panel and remove the panel.
- Always carefully remove the protective foam before turning on.
- Inspect all cables to ensure none were disconnected during shipping.
Step 2: Connecting your display
Most systems will have an add-on graphics cardPleasese see below to identify which monitor connector you should be using.
Always connect your display to the ports at 2B, however, if you don’t have connectors there then use the connectors at 2A.
Step 3: Connecting Your Peripherals
Connect your peripherals, such as your mouse, keyboard, speakers, headset, and network, to the appropriate ports.
Note: most peripherals today are color coordiated so when in doubt match the color of the connectors together with the matching ports on the system.
Step 4: Powering on your system
Use the included power cord and connect the cable to your system’s power supply and the other end to a wall outlet.
Remember, you may need to switch on the system’s power supply first before you can power on your computer with the front power button. (fig.2)
Frequently asked questions
Most questions can be solved in detail on our official online CyberPowerPC HelCenter, which you can visit at http://support.cyberpowerpc.com.
The support center can help you with the following:
- Online Support Contact Form
- Live Chat Help
- Drivers & Software
- Product Registration
- Technical Knowledge Base
- General Questions & Answers
- Warranty Information
Scan this to visit the support page now
CONTACT US
Customer Service & Technical Support
Mon-Fri 8:30 am – 6:00 pm (PST)
9:30 am0a3 pm 3 pm (PST)
If purchased at
888-900-5180
If purchased at other retailers
888-937-5582
Want answers quickly?
Find it on our Help Center
http://support.cyberpowerpc.com
CYBERPOWERPC
730 Baldwin Park Blvd
City of Industry,
CA 91746
Compliance Information Statement
- Responsible Party: CYBERPOWER INC.
- Address: 730 Baldwin Park Blvd, City of Industry, CA 91746
- Telephone: 626-813-7730
- Fax: 626-813-3810
- Type of Equipment: Computer
- Model Name: C Series
Federal Communications Commission Notice
This device complies with Part 15 of the FCC Rules,
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The above modeled computer was assembled employing modular CPU boards and power supplies. The list below lists the manufacturer name and manufacturer model number of said part used in the assembly of the computer. The original part manufacturer’s Declaration of Conformity can be found in the original part’s instructions manual or can be provided upon request.
For more manuals by CyberPowerPC, visit ManualsLibraryy