Epomaker HE65 RGB Mechanical Keyboard
BASIC FUNCTION
FUNCTION KEYS
LIGHT EFFECTS
PAIRING BLUETOOTH
Toggle the switch to the BT side, and make sure that the keyboard is under the BT mode:
- Hold Fn+Q/W /E for 3-5 seconds till the Q/W /E key blinks fast, and the keyboard is ready to pair.
- Turn on your Bluetooth device and find “HE65 Mec-1/2/3”, then connect When the keyboard is connected to the Bluetooth device, the indicator stops flashing and the connection is done.
- Press Fn+Q/W/E to toggle between the Bluetooth devices 1/2/3.
WIRED MODE
Toggle the switch to the USB, and plug in the keyboard.
PAIRING WIRELESS 2.4 OHZ
Toggle the switch to the 2.4G, make sure that the keyboard is under the wireless mode:
- Hold Fn+R for 3-5 seconds till the R key blinks fast, and the keyboard is ready to pair.
- Insert the 2.4G dongle into your computer. When the keyboard is connected, the indicator stops flashing.
BATTERY CHECK
Hold Fn + Backspace, the keys from 1 to Olights up to show the battery percentage; for example, if the keys from 1 to 6 light up when holding Fn + Backspace, it means that the battery lfe is currently 60% f keys of 1-Olight up, battery life is 100%
INDICATOR
- Capslock: The Capslock key lights up when the Capslock key is on.
- Win Lock: The Win key lights up when the Win key is locked.
KNOB
Fn + Press knob to toggle the knob function between volume control and screen control,
- Control the screen: rotate the knob to choose the setting, and press the knob to confirm the selected setting.
- Control the volume: rotate the knob to increase or decrease the volume, and press the knob to mute/unmute the volume.
SPEC
Before installing switches, be sure the pins are clean and straight.
Push Straight Down
Please be gentle. Be sure the pins are aligned with the slots.
Included Tools
Remove Switches
- Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
- Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
- Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
Install Switches
- Check that all the switch metallic pins are perfectly straight and clean.
- Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
- Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
- Inspect the switch to ensure it’s properly attached to your keyboard, and test it.
Note: If the key doesn’t work it’s possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.
WARRANTY
EPOMAKER’s Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn’t cover any damage that may occur from normal wear and tear. If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to Epomaker.
We provide a 1-year warranty for our products when bought from our website (EPOMAKER.com). Your item will not be covered by your 1-year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc.
We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the store that you bought your product from to resolve issues.
For more manuals by EPOMAKER, visit ManualsLibraryy
Epomaker HE65 RGB Mechanical Keyboard-FAQs
How do I turn on RGB lighting on my Epomaker keyboard?
You can enable RGB effects by clicking the “+” button in the Effects section. Choose from Monochrome (static color), RGB shift, or Breathing (pulsing light) modes.
What is Epomaker?
Epomaker stands for Epoch of Makers. It’s a company dedicated to creating feature-rich mechanical keyboards for enthusiasts around the world.
How can I unlock my Epomaker keyboard?
1. Press FN + Tab for 3 seconds to lock/unlock the keyboard.
2. Use FN + Win to lock/unlock the Windows key.
3. FN + Left Ctrl gives sleep settings (0 = never sleep).
Why isn’t the RGB lighting working on my keyboard?
This could be due to a firmware issue, loose cable, or incorrect settings. Try updating the firmware, checking connections, or adjusting RGB settings in the software.
How do I know if my Epomaker keyboard is charging?
1. A solid green light means it’s charging.
2. When the battery is full, the green light turns off.
3. If there’s no light, your battery is likely already charged or in good condition.
What does keyboard firmware do?
Firmware acts like the operating system of your keyboard. It controls key functions, lighting, macros, and can be updated via Epomaker’s software.
What is keyboard mastery?
Keyboard Mastery is a typing course (usually 50–60 hours) that helps users improve speed and accuracy by practicing letters, numbers, and symbols through timed drills.
Where is the “End” key on the keyboard?
The End key is typically in the top-right section of the keyboard. It moves the cursor to the end of a line or document, depending on the context.