FISHER FTW600 Total Wireless Combo Earbuds
Product introduction:
Function and Description:
How to connect:
- For the first time using, take out the earphones and they will turn on automatically. Open the Bluetooth function of smartphone, search the Bluetooth name of “FISHER‐FTW600” to pair and connect. Then you can listen to music or calling.
- For the second time, the earphones will connect to each other and your phone automatically.
If the earphone doesn’t connect with any device in 5 minutes, it will power off automatically.
Note: If you want to use single earphones, any one earphone will work separately.
How to Disconnect:
Put earphones into the charging case, they will be disconnected automatically and start charging. Or you can press the charging case button to start charging.
How to use:
On Music:
- Press the right earphone three times to play the next song.
- Press the left earphone three times to play the previous song.
- One press on the left or right earphone to play or pause the song.
- Press the right earphone about 1.5S to increase volume, Press the left earphone about 1.5S to decrease volume. (Not support for some of phone software versions).
On Call:
- One press to answer the call and then one click to hang up the call.
- Long press to reject the incoming call.
Google & Siri :
Double press the left or right earphone to activate Google or Siri then one press to quit.
How to charge:
Charging for earphones:
Put the earphone into charging case, they will be charged automatically. When the charging case battery is low, connect the type C cable to charge, the led light will be red and flash quickly. When the case is fully charged, the red LED light will stop flash. When the charging cable is unplugged, the red light will change to blue.
Charging for charging case via cable:
- Use an included cable to charge earphones.
- Recommend to charge with 1A – 2A charger.
Charging for charging case via wireless charger:
- Use the included cable to power the wireless charger.
- Recommend to charge with 1A – 2A charger.
- Put the charging case onto the wireless charger to charge. When charging, the indicator light will flash red; when the case is fully charged, the indicator light will stop flashing and keep red.
Package Includes:
- True wireless earphones
- Wireless charger
- Case cover
- Pair of Silicone wings
- Neck strap
- Carabiner
- 1 USB cable
- User manual
- Warranty card
Product specification
Earphone specification
| Earphone battery capacity | 40mAh |
| Bluetooth version: | 5 |
| Transmission distance | 33ft |
| Frequency | 20‐20KHZ |
| Earbuds working time: | Up to 6hours of playtime with case |
| Charging time | About 40min‐1.5 hours |
Charging box parameter
| Battery of Charging box | 230mAh |
| Charging time | About 40min‐1.5 hours |
| DC charging voltage | DC 5V |
(Note: Battery life & charging time may vary based on usage & types of devices used.)
Wireless charger specification
| Output power | 5W |
| Input | DC 5V,2A |
| Output | DC 5V,1A |
FCC‐ID:
TRUE WIRELESS EARPHONES FCC ID:2AIDL‐SS‐FTW600
Charging compartment FCC ID:2AIDL‐SS‐FTW600C
Wireless charger FCC ID:2AIDL‐SS‐FTWI600
FCC WARNING:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 & part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
RF exposure （TRUE WIRELESS EARPHONES）:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
RF exposure （Charging compartment&Wireless charger）:
This equipment must be installed and operated with a minimum distance of 15 cm between the radiator and the ser body.
Matters needing attention
- Please confirm if your device supports the wireless charging function, otherwise, it will not be charged.
- Please do not place magnetic objects such as metal/magnetic discs/credit cards on the wireless charger, as this may result in an inability to charge.
- Do not use this product in high-temperature and humid environments to avoid malfunctions, damage, or leakage.
- Do not splash water or other liquids onto the wireless charger. If cleaning is required, please make sure to disconnect the power supply.
Migear International Group LLC,
21 W 38th Street, 14th Floor, NY, NY 10018 USA
TEL: 929‐390‐4504
For more Manuals by FISHER, visit ManualsLibraryy
FISHER FTW600 Total Wireless Combo Earbuds-FAQs
How do I put my earbuds in pairing mode?
Press and hold the pairing button for a few seconds until the LED lights start blinking. This indicates the earbuds are ready to connect. Some models enter pairing mode automatically when powered on.
Do these earbuds have a reset function?
Yes. Double-tap the button on the right earbud, and on the third tap, press and hold for over 5 seconds until the unit shuts off. This will restore factory settings.
Why is only one earbud charging?
If one earbud isn’t charging, the issue could be due to dirt or blockage on the charging contacts. Clean the contacts and ensure proper alignment in the charging case.
Why aren’t my earbuds pairing together?
Check compatibility and reset both the earbuds and your device’s Bluetooth settings. Also, disconnect any nearby Bluetooth devices to prevent interference. Ensure the earbuds are fitted correctly in your ears.
Are Fisher FTW600 earbuds waterproof?
These earbuds have an IPX4 rating, making them splash-proof. They can handle light exposure to sweat and rain but should not be submerged in water.
How do I activate my earbuds?
Turn off the earbuds, then press and hold the power button for about 10 seconds to enter pairing mode. Open your device’s Bluetooth settings, find your earbuds in the list, and select them to connect.
How do I know when my earbuds are fully charged?
The LED light on the charging case will turn green, indicating the earbuds are fully charged.
Why is only one earbud connecting?
Try resetting the Bluetooth connection. Some earbuds may appear as separate devices in your Bluetooth settings, especially if you’ve used one earbud independently. Disable and re-enable Bluetooth on your device and reconnect.
Do I need WiFi to pair my earbuds?
No, Bluetooth does not require WiFi. It works independently without an internet connection.
How do I reset my earbuds’ pairing?
Turn off Bluetooth on your device and then turn it back on. If previously paired, remove or forget the earbuds from your Bluetooth settings and attempt to pair again. To reset the earbuds, place them in the charging case and hold the reset button inside for 5 seconds.