Fugoo Element F6ELKS01 Bluetooth Speaker User Manual

Fugoo Element F6ELKS01 Bluetooth Speaker

In the Box

• Fugoo Element Bluetooth speaker
• 5V/1A 1m (3.2’/3.2ft) Micro-USB power cable
• 3.5mm 0.6m (1.9’/1.9ft) AUX IN audio cable
• Quick Start Guide & User Manual (Including Warranty Statement)

Buttons, LED, ports & mount functions

1. Power Button
2. Power LED (RED)
3. Play/Pause Button
4. Decrease Volume Button
5. Microphone
6. Increase Volume Button
7. Bluetooth® Button
8. SYNC LED (Blue/Amber)
9. SYNC Button
10. Carrying Strap Bracket
11. AUX IN 3.5 mm Port
    – Wired Audio-in
12. Micro-USB Port (DC IN)
    – Charging / Firmware Updating
13. ¼” Universal Mount

Charging

IMPORTANT: Charge for 6 hours before first use.

Connect a micro-USB cable to the DC IN port of the speaker. Plug the other end of the cable into an AC adapter and that adapter into an AC power outlet.

Battery status

• While the battery is being charged, the LED will slowly pulse RED; When fully charged, the LED will glow solid RED.
• Full charge achieved in 6 hours while powered OFF or 12 hours while powered ON.

Power, Bluetooth pairing, and speaker controls

Power

Power On / Off ………………………………….. Hold button (1 second)

Bluetooth pairing

• DO NOT have a line connection in the AUX-IN port
• Pair devices within 3 feet (1 meter); Max signal range of 33 feet (10 meters; Signal disruption/loss may occur when devices are out of range from each other.

Pair device ………………………………………… Hold button (3 seconds)

• Turn your audio source’s Bluetooth On and select “FUGOO ELEMENT”

Disconnect device ……………………………. Click button

Clear all paired devices ……………………. Hold button (10 seconds)

Audio controls

Play / Pause ………………………………………. Click button
Volume up …………………………………………. Click button
Volume down ……………………………………. Click button
Next track …………………………………………… Click and
Previous track …………………………………….. Click and
Voice Control………………………………………. Hold (2 seconds)
TWS pair/unpair…………………………………… Hold (2 seconds)

Call controls

• Answer/end call ………………………………. Click button
• Reject a call ……………………………………….. Double-click button
• Mute the microphone in a call ………………… Click and buttons

The speaker must be off for the following functions to work:

Power Save On / Off …………………………. Hold and buttons

• If the speaker is not connected to a source device and is not plugged into a power source, the speaker turns off after 15 minutes of inactivity.
• If the speaker is not connected to a source device and is plugged into a power source, the speaker turns off after 30 minutes of inactivity.
• If the speaker is connected to a source device and is not plugged into a power source, the speaker turns off after 1 hour of inactivity.
• If the speaker is connected to a source device and is plugged into a power source, the speaker will not shut off automatically. Line in mode
• If there is no signal input and it is not plugged into a power source, the speaker turns off after 60 minutes of inactivity.
• If the speaker is plugged into a power source, the speaker will not shut off automatically.
• If Power Save mode is off, then the speaker will remain on until you turn it off by pressing the button for 1 second.

TWS pairing

1. Pair the speaker to a Bluetooth audio device (transmitter).
2. Power Onon second SYSYNC-capablepeaker (receiver).. Do NOT pair to a Bluetooth device.
   • If the BT (receiver) device is connected, long-press press button (3 seconds) to enter TWS pairing.
3. Hold the button of the Bluetooth paired speaker for 2 seconds.
   • While the TWS pairing
     The LED on the transmitting devices will flash blue alternately, searching for a TWS compatible device to connect to.
   • TWS Successful
     Transmitting LED: Blue
     Receiving LED: Amber

AUX IN (3.5 mm audio cable)

Plugging in a 3.5 mm audio cable into the AUX IN input will disable the Bluetooth function and will switch the audio signal to the AUX IN audio mode.

IPX7 (waterproof)

This speaker has protection against water to a maximum depth of 3 feet (1 meter) for up to 30 minutes.

Floats

The speaker naturally floats on the surface of the water.

CAUTION:

• The protective rubber tab, covering the DC IN and AUX IN ports, must be firmly in place before immersing the speaker in water,, or permanent damage may occur.
• Do NOT immerse while charging.
• Never connect a cable to any of these connectors if they are w, or are at risk of getting wet.

Support

• Visit Fugoo’s Support page at support.fugoo.com for help with connecting, to view our FAQs,, or to ask us a question.
• Visit Fugoo’s downloads page at fugoo.com/product-support for firmware updates, alternative voice prompts, and mobile wallpaper images.
• Send us a support request at [email protected].

Specifications

Power

• Battery ……………………………………………….. Lithium-Ion 4400mA

Audio

• Speaker drivers …………………………………. (x2) 1.75” Speaker
  ………………………………………………………… (x2) 2.5” Passive Radiators
• Audio output ……………………………………… 20W
• Frequency Range ……………………………… 50Hz – 20KHz
• THD + Noise ……………………………………… ≤10%
• Signal-to-Noise …………………………………. >60dB
• Microphone ……………………………………….. Omnidirectional
  ………………………………………………………… Echo cancelling
  ………………………………………………………… Noise reducting

Conectivity

• Bluetooth Version …………………………….. 4.2

Construction

• Materials ……………………………………………. Plastic and metal
• Weight ……………………………………………….. 1.8 lbs. / 0.82 kg
• Dimensions (LxWxH) …………………………. 9.35” x 3.3” x 3.25”
  ………………………………………………………… 238 x 84 x 82mm

Enviroment

• Water-resistant………………………………… IPX7
• Operating Temp. Range …………………… 32F° to 104F° / 0C° to 40C°
• Operating Humidity ………………………….. 40-90% RH
• Storage Temp. Range ………………………. -13F° to 158F° / -25C° to 70C°

Legal notices

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution!

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

RF exposure statement

This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

For more manuals by Fugoo, visit ManualsLibraryy

Fugoo Element F6ELKS01 Bluetooth Speaker- FAQs