HS-06 Galaxy Star Projector
PRODUCT DESCRIPTION
FUNCTION BUTTON
REMOTE CONTROL
Remote control instructions:
- LED light switch click to turn on or off the lights.
- Laser switch, click to turn on to turn off the laser light.
- Press the red, green, blue, and white buttons to turn on or off the corresponding lights.
- Volume adjustment, click to increase or decrease volume.
- Motor speed adjustment, press S+ to turn on the motor slowly, then press S+ to increase the speed, press S- to turn off the motor.
- The brightness of the lamp is adjusted to three levels. The brightness of the power-on is 100%. Press it once to 60%, press 30% again, press it again to 60%, press 100% again, and the cycle continues.
PRODUCT SPECIFICATION
| Color | Black / White |
| Style | Red Green Blue White |
| Light Source Type | LED |
| Power Source | Corded Electric |
| Controller Type | Remote Control |
| Wattage | 6.5 Watts |
| Remote Control Distance | 5 M |
USER MANUAL
- Press and hold the first button for 2 seconds to turn on or turn off, and short-press the Bluetooth audio function when it is turned on;
- The second button is to switch the lighting mode, the short press to switch between bright monochrome, monochrome red, green, blue, and white breathing slowly, colorful light breathing slowly, the voice control change mode, the long press to switch the laser light;
- Short press the third button to decrease the volume, and long press the previous song; (the third button silkscreen is -)
- Short press the fourth button to increase the volume, and long press a song; (the silkscreen of the fourth button is +)
SAFETY INSTRUCTIONS
- Do not modify or repair this product.
- It is forbidden to use voltages other than 120V AC, which may cause damage, fire, and electric shock.
- Do not excessively bend, pull, or twist the power cord, which may damage the power cord and cause a fire.
- Do not expose the host to rain or other liquids.
- Do not touch the power plug with wet hands.
- Do not use the device in the place which with propane, gas, natural gas, or any other flammable.
- Please keep the device stored in dry places.
ACTIVATE WARRANTY FREE 2 – YEARS
Scan or Enter online-warranty.net
WARRANTY CARD
Activate here 7-days
Extend warranty for 1 year
Need help? Contact
Fantastic Light Show
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
For more such technical BLOGs, visit ManualsLibraryy
HS-06 Galaxy Star Projector-FAQs
How do I turn on the HS-06 Galaxy Star Projector?
Connect the projector using a 5V USB cable and a 5V/2A adapter (adapter not included). Then slide the ON/OFF switch to the middle position to power it on.
How do I reset the projector?
If your device isn’t connecting to Wi-Fi, press and hold the power switch for 6 seconds to reset it. Then reconnect through the app.
Can I leave the star projector on all night?
It’s not recommended to leave the projector on all night, as excess light can affect sleep. Use it as a sleep aid, and turn it off or use the timer once your child is asleep.
Does the HS-06 projector have a sleep timer?
Yes, you can set a sleep timer to automatically turn off the projector. Depending on your remote or settings menu, timers can usually be set for up to 180 minutes.
Can I factory reset the projector?
Yes, most projectors offer a factory reset to restore default settings. For model-specific steps, refer to your user manual or press and hold the reset button, if available.
How does the Galaxy projector create the starry effect?
The projector uses LED lights, lenses, and diffusers to scatter and reflect light in a way that mimics stars and galaxy patterns on your ceiling or walls.
Can I use this projector during the day?
Yes, but for best visibility:
1. Keep the room dark or shaded
2. Avoid direct sunlight on the projection area
3. Use a high-lumen projector (4000+ lumens is ideal)
4. Ensure the screen or wall is clean and smooth
How long can I use the projector before replacing the light source?
1. Lamp-based projectors: 1,500 to 5,000 hours
2. LED or laser projectors: Up to 20,000 hours or more
The HS-06 likely uses LED, offering a much longer lifespan.
Are projector headlights adjustable like star projectors?
No, projector headlights (used in cars) are different from galaxy projectors. They do have adjustment screws, but these are meant for aligning your vehicle’s headlights and not related to star light projectors.