iHome iPBT50G Bluetooth Speaker
POWER TOWER Dual Charging Speaker
Charge your iPhone or mobile devices:
- Insert the USB-C cable into the USB-C port of the unit. Connect the other end to the 20W USB-C adaptor.
- When the iPBT50 is powered OFF, audible voice prompts for wireless charging are inactive, and only the color light bar will flash three times. It will flash green to indicate charging has begun and red if charging is stopped or the device is removed from the pad.
Note: When the iPBT50 is powered ON, audible voice prompts announce “charging” or “earbuds charging” when a device is placed on the related charging pad. And if charging stops or the device is removed from the pad, the iPBT50 will announce “charging interrupted” or “earbud charging interrupted.”
Power Button and Bluetooth connection operation
- Turn on your Bluetooth device and make it discoverable by turning on Bluetooth mode.
- Press and hold the Power Button on the iPBT50. The first time the unit is powered on, it will automatically enter Bluetooth pairing mode.
- Select ‘iHome iPBT50’ on your device to connect BT, short-press the Bluetooth button to play or pause BT music.
- To manually pair with a new BT device, press and hold the BT button for 3 seconds.
- To reset the Bluetooth pairing table, press and hold the BT pairing button for 10 seconds.
Light Button 
Long-press the light button to cycle through the 4 light modes:
- Slow fade (default) (2) Fast Change (3) Single color (4) Off
- Short press changes brightness: Low/Med/Hi.
- Remembers the last used lighting mode.
- Note: Long-press the light button to activate lights while the unit/BT is powered off.
For questions and additional information, please visit: support.ihomeaudio.com/support/.
IMPORTANT SAFETY INSTRUCTIONS
Please heed all warnings, read and follow all instructions, and keep these instructions handy for future reference.
- Do not use this product near water.
- Unplug the unit and clean only with a damp cloth. Stronger cleaning agents, such as Benzene, thinner, or similar materials, can damage the surface of the unit.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
- Only use attachments/accessories specified/supplied by the manufacturer.
- Unplug this product during lightning storms or when unused for long periods of time.
- Damage Requiring Service
- This product should be serviced by qualified service personnel when:
- Plug has been damaged.
- Objects have fallen into or liquid has been spilled into the enclosure.
- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
- The unit exhibits a marked change in performance or does not operate normally.
- No naked flame sources, such as lighted candles, should be placed on this product.
- Attention should be drawn to the environmental aspects of battery disposal. Many electronics retailers now recycle batteries and other electronic components at no charge. To find a drop-off location near you, visit www.call2recycle.com.
- This product is suitable for use in tropical and/or moderate climates.
WARNING:
- To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
- The mains plug of the power adaptor is used as the disconnect device; it shall remain readily operable.
FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance of 20cm (8 inches) between the radiator and your body.
ISED Information
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device. The device complies with ISED RF exposure requirements; users can obtain Canadian information on RF exposure and compliance. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
For More Manuals By iHome, Visit ManualsLibraryy.
iHome iPBT50G Bluetooth Speaker-FAQs
What is the iHome iPBT50G Bluetooth Speaker?
The iHome iPBT50G is a multifunction Bluetooth speaker that combines wireless audio streaming, wireless charging, and a color-changing LED night light in one compact device. It is designed for bedside tables, desks, and small spaces where users want entertainment and charging convenience together.
Does the iHome iPBT50G support wireless phone charging?
Yes, the iPBT50G includes a 15W MagSafe-compatible wireless charging pad along with an additional 5W charging area for accessories like AirPods. This allows users to charge multiple compatible devices simultaneously while listening to music or using the built-in night light.
How good is the sound quality on the iHome iPBT50G?
The speaker delivers decent sound quality for casual listening and small rooms. Many users appreciate its clarity and convenience, although some reviews mention limited bass response and noticeable distortion at higher volume levels compared to premium Bluetooth speakers.
Does the iHome iPBT50G have color-changing lights?
Yes, the speaker includes built-in LED lighting with multiple color-changing modes. Users can switch between different lighting effects to create ambient room lighting, making the device suitable for bedrooms, gaming setups, or desk environments with decorative lighting preferences.
How far is the Bluetooth range on the iHome iPBT50G?
The iPBT50G supports Bluetooth streaming from up to approximately 100 feet away under ideal conditions. Actual range may vary depending on walls, wireless interference, and connected device compatibility, but it generally performs reliably for normal home or office use.
Is the iHome iPBT50G easy to set up and use?
Most users find setup simple because the speaker pairs quickly with smartphones and tablets through Bluetooth. The controls are straightforward, and the wireless charging feature works automatically with compatible devices, making it convenient for daily bedside or workspace use.
Can the iHome iPBT50G hold larger smartphones securely?
Some users report that the charging stand works best with standard-sized phones and may feel less stable with larger models like the iPhone Pro Max series. Device positioning can sometimes require adjustment to maintain reliable wireless charging alignment.
Does the iHome iPBT50G work with Apple Standby Mode?
Yes, the speaker is compatible with Apple Standby Mode, allowing supported iPhones to display widgets, clocks, or media controls while charging horizontally. This feature makes the speaker useful as both a charging station and bedside display accessory.
What are the main drawbacks of the iHome iPBT50G?
The most common complaints involve average bass performance, occasional audio distortion at high volumes, and limited support for very large smartphones on the charging stand. Some users also feel the speaker focuses more on convenience features than premium audio performance.
Is the iHome iPBT50G Bluetooth Speaker worth buying?
The iPBT50G is a good option for users wanting a compact all-in-one bedside speaker with wireless charging and ambient lighting. While audiophiles may prefer stronger sound quality elsewhere, many buyers appreciate its convenience, modern design, and multifunctional everyday use.