JBL Tune 125TWS Earbuds
What’s in the Box
How to wear
First-time use
Power On & Connect
Pairing
Power Off
Manual Controls
Button Command
Charging
Led Behaviors
TECH SPEC
IC RF Exposure Information and Statement
- The SAR limit of Canada (C) is 1.6 W/kg averaging over one gram of tissue. Device types: (IC:6132A-TUNE125TWS) have also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.23171W/kg. The device was tested for typical bodily operations where the product was kept 5 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters, and similar accessories shall not contain metal parts in its assembly. The use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
Head operation
- The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s ear and the product (including the antenna). Head exposure that does not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
- IC:6132A-TUNE125TWS
For more manuals by JBL, visit ManualsLibraryy
JBL Tune 125TWS Earbuds Quick Start-FAQs
What are the call and playback controls for JBL earbuds?
To mute or unmute the microphone during a call, hold the touch area on the left earbud for two seconds. To pause or resume playback, tap the right earbud. Double-tap the right earbud to skip to the previous track.
Do JBL Tune 125TWS earbuds have noise canceling?
No, the JBL Tune 125TWS earbuds do not have noise-canceling features. They provide up to 9 hours and 11 minutes of battery life, above average for non-noise-canceling earbuds.
How can I tell if my JBL earbuds are fully charged?
While charging, a solid red light will show. When fully charged, the red light turns off, and you can expect around 8 hours of playback time.
Are JBL Tune earbuds waterproof?
JBL Tune earbuds are water-resistant and sweatproof with an IPX4 rating, meaning they can handle workouts and light rain.
How do I turn off my JBL earbuds?
To turn off your JBL earbuds, place them in the charging case and close the lid.
What can I do if I lose my JBL earbuds charging case?
You can purchase a replacement charging case by contacting JBL Customer Support at (800) 336-4525. They’re available Mon-Fri, 9 am – 11 pm (EST), and Sat-Sun, 9 am – 5 pm (EST).
Why is my JBL earbud case blinking?
A blinking light on the case indicates it needs charging to power up your earbuds as well.
How do I find my JBL earbuds if they’re lost?
Use the “Find My Buds” feature, which plays a sound to help you locate them.
Can JBL earbuds be overcharged?
Overcharging JBL earbuds is not recommended as it could damage the battery. Be sure to turn off your earbuds when not in use.
How can I identify fake JBL earbuds?
Authentic JBL packaging has clear, textured printing, visible serial numbers, barcode stickers, brand fine print, and compliance icons. These may be missing or of lower quality on counterfeit packaging.
What do the different lights on JBL earbuds mean?
Flashing blue means the earbuds are on but not connected. Solid blue indicates they’re connected to Bluetooth. Flashing red and blue indicates pairing mode, while flashing red shows a low battery.
What does the red light on JBL earbuds mean?
A constant red light means the earbuds are charging. The light turns off once fully charged.
How long do JBL earbuds last on a full charge?
JBL earbuds offer up to 20 hours of playtime on a full charge.