Klipsch The One Plus Premium Bluetooth Speaker System
INSIDE
SETUP
CONTROLS
- Power/Source Indicator
- Multifunction Button
- Volume Dial
- Utility Button
Utility Button
- BLUE = Bluetooth® Input
- WHITE = USB-C Device
- YELLOW = USB-C Thumb
- GREEN = Auxiliary Input
CONNECTIONS – BLUETOOTH ®
- Hold 3 Seconds
- Flashing Blue
CONNECTIONS – AUXILIARY
- Press until Green
CONNECTIONS – USB-C
- Tap <1s until White
- Tap <1s to switch inputs
BROADCAST MODE PAIRING
- Tap the utility button twice
- Flashing Blue/White
- Flashing Blue x3
FACTORY RESET
- Hold 5 Seconds
KLIPSCH CONNECT SMARTPHONE APP
IMPORTANT SAFETY INSTRUCTIONS!
- READ these instructions.
- KEEP these instructions.
- HEED all warnings.
- FOLLOW all instructions.
- DO NOT use this apparatus near water.
- CLEAN ONLY with a dry cloth.
- DO NOT block any ventilation openings. Install according to the manufacturer’s instructions.
- DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades, with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wider blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- ONLY USE attachments/accessories specified by the manufacturer.
- USE ONLY with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- UNPLUG this apparatus during lightning storms or when unused for long periods of time.
- REFER all servicing to a qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled, or objects have fallen into the apparatus. The apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- DO NOT expose this apparatus to dripping or splashing, and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.
- To completely disconnect this apparatus from the AC Mains, disconnect the power supply wall wart from the AC receptacle.
- The mains plug/appliance coupler is used as a disconnect device, the disconnect device shall remain readily operable.
- DO NOT overload wall outlets or extension cords beyond their rated capacity, as this can cause electric shock or fire.
For more manuals by Klipsch, visit ManualsLibraryy