Miroco MI-MF001 Electric Milk Frother Steamer
- Transparent Lid
- Stainless Steel Frothing Pitcher
- LED Indicator
- Power Button
- Power Base
- 2 x Whisk (Heating)
- 2 x Whisk (Frothing )
Thank you for choosing the Miroco Milk Frother. Please read this manual carefully and keep it for future reference. If you have any questions or issues, please contact our customer support team by email at support@mirocohome.com.
How to use
| Whisk | Function | Max Capacity | Time | Temperature |
| Whisk (Frothing) | Frothing cold milk | 115 ml / 3.9 oz | 60-65s | / |
| Frothing & Heating | 115 ml / 3.9 oz | 120-160s | 65°C / 149°F | |
| Whisk (Heating) | Heating (with a small amount of froth) | 240 ml / 8.1 oz | 210-250s | 65°C / 149°F |
- Choose an appropriate whisk and assemble it onto the tip on the base of the frothing pitcher.
- Pour milk into the frothing pitcher no higher or lower than the maximum and minimum markings inside.
- Cap on the lid. Refer to the table below to operate the device.
| Functions | LED Indicator Status When the Device is Working | LED Indicator Status When the Process Is Complete |
| Heating & Frothing / Heating Milk | Press the Power Button, the red and blue LED will light up to start heating & frothing milk | The blue LED turns off and the red LED keeps flashing |
| Frothing Cold Milk | Press and hold the Power Button for 1 to 2 seconds, the blue LED will light up to start frothing cold milk | The blue LED turns off and the red LED keeps flashing |
Caution:
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their
safety. - Do not disassemble the unit.
- Keep away from heat, moisture, and corrosive substances.
- Do not remove the power cable with wet hands as it may cause an electric shock.
- Use whole milk (fat content > 3.0%) for the best results.
For more manuals by Miroco, visit ManualsLibraryy
Miroco MI-MF001 Electric Milk Frother Steamer-FAQs
Does the Miroco milk frother heat the milk?
Yes, the Miroco milk frother can heat and froth milk, allowing you to create hot, warm, or cold frothed milk with just a button press. For the best results, use whole milk with a fat content of over 3%.
What beverages can I make with this milk frother?
You can create café-quality drinks like lattes, cappuccinos, macchiatos, hot chocolates, and flat whites effortlessly at home.
What is the warranty on the Miroco milk frother?
The device comes with an 18-month warranty. If it becomes defective within this period, Miroco offers a free replacement.
Does milk froth better when cold or hot?
Milk froths best when it is cold because it absorbs air more efficiently. For a fine latte froth, introduce air while the milk is still cold, then adjust the wand position as the milk warms up.
Can I froth half-and-half?
Yes, you can froth half-and-half, milk, or heavy whipping cream. However, steaming coffee creamer is not recommended. You can still use an electric hand frother to thicken it slightly.
How do I use the milk frother correctly?
Pour cold milk or cream into the frother, turn it on, and move it up and down until the desired consistency is reached. For extra flavor, you can add vanilla extract or a bit of powdered sugar.
How much electricity does the milk frother use?
The Miroco milk frother operates at 550W, consuming approximately 0.55 kWh per hour. It has a 300ml capacity for warming milk and a 150ml capacity for frothing.
What are the disadvantages of using a milk frother?
1. Handheld frothers require manual effort.
2. Some models may struggle with thicker or non-dairy milk.
3. Handheld versions do not heat milk, unlike electric frothers.