Mojawa M2101 Run Plus Bone Conduction Sports Headphones
Power On and Power Off
Power On
Press and hold the Power Button for 2 seconds, wait for the indicator light to turn on. Release the Power Button when you hear “Power On”.
Power Off
Press and hold the Power Button for 2 seconds wait for the indicator light to turn off. Release the Power Button when you hear “Power Off.
Pairing
- With the headphones powered off. press and hold the Power button for 5 seconds. the indicator will flash and you will hear “Pairing”.
- On your mobile device, make sure the Bluetooth is turned on.
- Select “Run Plus” from the device list.
Run Plus can be actively connected to two devices simultaneously.
Connect the first device and turn off the headphones. Restart to enter pairing mode and pair with the second device. If the head- phones have a pairing history with two devices, when the headphones is connected to one device, select Run Plus from the device list in the second phone or laptop to complete the connection.
- Incoming calls from either device will interrupt the current music playback, automatically resume playback after hanging up or click the button to resume playback.
- If one device is playing music and the other device also begins to play music, then the headphones will play the most recent music.
Headphones Controls
* To pause the current call and answer an incoming call. press the button twice.
Mode Shifting
- Water can affect Bluetooth transmission while swimming. Please double click the button and hold until you hear MP3 Mode” To transfer back to Bluetooth mode, double click the button and hold until you hear “Bluetooth Mode”.
- In the MP3 mode, double click the touchpad to shift between normal play, shuffle and single loop.
- When not swimming. MP3 mode can keep Bluetooth background connection. When there is Bluetooth voice call. phone call. music, etc. the device will switch to Bluetooth mode. If you need to keep the local storage mode unaffected by Bluetooth, please disconnect the Bluetooth of your phone.
- While swimming, the Bluetooth signal cannot be transmitted under water, please switch to the local storage mode.
- Please lock the volume touchpad while swimming (as water may affect it) please adjust to the suitable volume, then four-click the power button to lock the volume touchpad of the headphones. Four clicks on power button again or reboot to unlock the volume touchpad
Adjust the Volume
Volume+
Swipe up on the touchpad to turn up volume, quickly swipe up to increase the volume significantly.
Volume-
Swipe down on the touchpad to turn down volume, quickly swipe down to turn down the volume significantly.
- In the Bluetooth mode, double-click the touchpad to activate the phone voice assistant.
- In noisy environments such as on airplanes or trains, the product can be used along with earplugs to block out background noise and enjoy better bone conduction sound.
- The volume adjusting function may be temporarily disabled underwater. please adjust the volume in advance under dry conditions.
Charging
Charge (5V =- 500mA) the headphones with the magnetic charging cable attached to the product and the indicator will glow during charging. At room temperature, allow up to one hour to fully charge the battery The charging time may be longer under conditions such as low temperature environment. When the battery charge level is low, the battery indicator will flash fast; if the battery level is high, the indicator light will flash slow; when the battery is fully charged, the indicator will stay on.
Battery Lifetime
The battery is 150mAh lithium-ion battery. At room temperature, the headphones can maintain play for about 8 hours at the 75% volume. and for about 6 hours at the 100% volume. High and low temperatures, special tracks, different mode of sound scenes, attenuation of battery life, etc. will reduce the battery lifetime, which will depends on the actual conditions.
Data Transfer
Connect the product with a computer using the magnetic data cable, you will see a mobile storage device named “Run Plus” displayed on the computer side. Once device shows up on your computer, you can drag or copy your files into the folder. Do not interrupt during data transfer, otherwise the product may be damaged. Run Plus supports 6 file formats of music, MP3, WAV, AAC, FLAC, M4A, APE, and support up to 48k*16-bit. If the file format is not supported, please use transcoding software to convert to MP3 format and transfer to Run Plus local storage.
Storage and Maintenance
The headphones should be stored in a cool and dry place. It should be used at the ambient temperature between 0°C (32°F )and 45°C ( 113ºF ) and charged at the ambient temperature between 0°C and 40°C (104°F). The lifespan of the battery may be reduced when it is operated in an extreme environment where it is too cold, hot or damp.
The headphones is IP68 swimming grade waterproof, but it is recommended not to let the earphone come into contact with soap, shampoo, conditioner, lotion, perfume and other corrosive substances. Please clean it immediately after swimming or water sports. Do not let the headphones come into contact with high-speed water flow, water vapor, or be subjected to falling impacts.
Waterproofing performance is not permanently effective and may weaken over time. When left unused for a long time, the headphones must be recharged before use. A dry charging port helps to reduce the damage risk of your headphones during charging.
Safety and Certification
Use manufacturer(MOJAWA )-designated accessories and supplies only.
- The headphones should be kept out of the reach of children and pets to avoid swallowing it in accident. There is a Li-polymer battery in the headphones, which can potentially cause a hazard. If the part is swallowed, seek medical care immediately. The unused headphones should be kept out of the reach of children and pets.
- Do NOT use the headphones at a high volume for an extended period. To avoid hearing damage, use the headphones at a comfortable, moderate volume level. Your hearing may be damaged and the sound may also be distorted at a super high volume. Turn the volume down on the headphones before placing it in your ears.
then turn the volume up gradually until you reach a comfortable listening level. - Use caution and follow applicable laws regarding the use of phone and head phones if using the headphones for phone calls while driving. Some jurisdictions impose specific limitations on the use of such products while driving. Do not use the headphones for any other purposes while driving.
- When you need to use the headphones while engaging in an activity needing concentrated effort, for example, riding a bicycle, or walking in or near the traffic, a construction site or railroad, please beware of your safety and follow relevant laws regarding the use of headphones.
- This product contains small parts which may be a choking hazard. It is not suitable for children under age 3.
- This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
- Do not make unauthorized alterations to this product.
- Use this product only with an agency approved power supply that meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).
- Do NOT expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).
- Do not expose this product to hot temperature, smoke, or fume lest it may catch fire.
- Do not charge this product during thunder and lightning.
- Do not throw this product into fire last the battery may explode when overheated .
FCC ID
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursue-ant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to ] meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
IC ID
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the
device.
Radiation Exposure Statement
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual.
NB
Hereby, MOJAWA declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on https://mojawa.com/pages/eu-declaration-of-conformity.
CB/CE
- Warning To avoid replacement of a battery with an incorrect type.
- Don’t disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a Battery.
- Don’t leaving a battery in an extremely high temperature surrounding environment.
- To avoid battery subjected to extremely low air pressure.
To prevent possible hearing damage, do not listen at high volume levels for long periods. The symbol 
indicates DC voltage 
. RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European
E directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
Statement
Your headphones are covered by a warranty. Visit our website at https://www.mojawa.com/pages/warranty-claim for details of the limited warranty.
- Failure to register will not affect your limited warranty rights.
- The warranty conditions are available on our official website: www.mojawa.com or you can contact the dealer. Product specifications, designs, and the content of this manual are subject to change without notice. For an update on MOJAWA, please visit our website: www.mojawa.com.
Contact us
E-mail: aftersale@mojawa.com
Website: https://www.mojawa.com
Manufacturer: Suzhou Mojawa Intelligent Electronics Co.. Ltd.
Address: Room F1-A-1028, Building A2, NO. 8. Qicun Road, Suzhou, Jiangsu Province, PRC
For more manuals by Mojawa, visit the ManualsLibraryy
Mojawa M2101 Run Plus Bone Conduction Sports Headphones-FAQs
How do bone conduction headphones work?
Bone conduction headphones transmit sound vibrations along your cheekbones, bypassing the ear canal. This method uses the natural transmission of sound vibrations, making it effective even in noisy environments.
How do I lock the Mojawa Run Plus headphones?
To lock the touch area, quadruple-click the device. This enters it into underwater mode. You can unlock by another quadruple-click or by restarting the device.
Are there any side effects of using bone conduction headphones?
Some users may experience a slight vibration on the cheekbones. While this sensation can be unusual initially, most users adapt over time, though some may find it slightly discomforting at higher volumes.
Can bone conduction headphones cause hearing damage?
Any headphones, including bone conduction models, can cause hearing damage if used at very high volumes for long periods. Listening at moderate levels is always recommended.
Can I sleep while wearing bone conduction headphones?
Yes, bone conduction headphones are generally comfortable for sleeping as they don’t rest on the ears. They allow more freedom of movement, making it easier to sleep on your side.
Is it safe to wear bone conduction headphones all day?
Bone conduction headphones like the Mojawa Run Plus provide comfort and awareness, making them safe for extended use. Their open-ear design lets you stay alert to your surroundings while enjoying your audio.
What are the disadvantages of bone conduction headphones?
One drawback is sound leakage, which can make audio audible to others nearby, potentially compromising privacy in quieter environments.
Can bone conduction headphones cause headaches?
If the headphones are too tight, they can create pressure on the sides of the head, which might lead to headaches. Ensuring a proper fit can help prevent discomfort.
Do bone conduction headphones leak sound?
Yes, bone conduction headphones can leak sound, especially at higher volumes, so others nearby might hear your audio. Leakage levels vary depending on the headphone design.
Are bone conduction headphones safe for the brain?
Yes, bone conduction headphones emit minimal electromagnetic waves, which are far below levels that could cause harm to the brain or hearing nerves.