Blog Post

Noorio H100 Smart Hub Base Station-FI

Noorio H100 Smart Hub Base Station User Manual

Noorio logo

Noorio H100 Smart Hub Base Station

Noorio H100 Smart Hub Base Station-PI

What’s Included

Noorio H100 Smart Hub Base Station-1

Product Overview

Noorio H100 Smart Hub Base Station-2Noorio H100 Smart Hub Base Station-3

LED Indication

Noorio H100 Smart Hub Base Station-4

Set Up Your Device

  1. Connect the power cable and Ethernet cable to your Noorio Smart Hub. Noorio H100 Smart Hub Base Station-5
  2. Scan the code below to get the Noorio APP. Noorio H100 Smart Hub Base Station-6
  3. Tap Set up a Device to add the device.

For online help and support, visit: https://support.nooriolife.com/

Notice

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio/TV technician for help.

Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions. The min separation distance is 20cm.

CE sign This product complies with the radio interference requirements of the European Community.

Declaration of Conformity

This product complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit https://www.nooriolife.com/

Disposal sign This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on the disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions.

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

IC RF Statement

When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.

Customer Service

Warranty

1-year limited warranty

Email Us

Customer Support [email protected]

Noorio Innovations Limited
Office 216 2nd Floor, Alpha House, 27-33 Nathan
Road, Tsim Sha Tsui, Kowloon, Hong Kong

For more manuals by Noorio, visit ManualsLibraryy

Noorio H100 Smart Hub Base Station- FAQs

How do I set up the Noorio H100 Smart Hub?

Plug the hub into a power outlet using the provided adapter. Then, connect it to your Wi-Fi router using the included Ethernet cable. Once powered on, the hub will automatically start searching for compatible Noorio devices. Complete setup in the Noorio app by following the on-screen instructions.

How do I connect devices to my Noorio Smart Hub?

Open the Noorio app, go to Device Settings, and choose Add Device. Ensure the new device is powered on and close to the hub. The hub will detect and pair it automatically.

Does the Noorio H100 Smart Hub require internet to work?

The hub can perform basic functions like storing and managing local footage without internet access. However, features such as remote viewing, app control, and cloud access require an internet connection.

Why is my Noorio camera not connecting to Wi-Fi?

Make sure your Wi-Fi router is functioning properly and that you’re using a 2.4GHz network (channels 1–11). Double-check the Wi-Fi password and ensure it only contains English letters. If problems persist, restart both the camera and the router before reconnecting.

How do I reset the Noorio H100 Smart Hub to factory settings?

Press and hold the Sync button on the hub for several seconds until you hear, “Device reset successfully.” The indicator light will flash blue, showing it’s ready to be set up again via the Noorio app.

What are the benefits of using the Noorio H100 Smart Hub?

It provides seamless device management, enhanced automation, local video storage, and reliable security alerts—all within one ecosystem. It also helps improve network stability and data protection.

Can I use my phone to manage the Smart Hub?

Yes. Install the Noorio app on your smartphone to monitor cameras, receive alerts, and adjust settings from anywhere with an internet connection.

How many devices can connect to the Noorio Smart Hub?

The Noorio H100 Smart Hub supports up to 4 cameras and 64 sensors simultaneously, allowing full control of your home security setup from one central hub.

Where is the sync button located on the Noorio Hub?

The Sync button is typically found on the side or back of the hub, near the status indicator light. It’s used for pairing devices and performing a factory reset.

Leave a comment

Your email address will not be published. Required fields are marked *