Petwant F6 Six-Meals Automatic Pet Feeder User Manual

Petwant F6 Six-Meals Automatic Pet Feeder

Meet Your Automatic Pet Feeder

Pet Feet Protection

Product parameters

Assemble & Disassemble

Press down both sides of the top lid and rotate in the direction of the arrow to disassemble the top lid.

1. Test Before Using:
   1. Plug in the micro-USB cable or install three size batteries and switch them on, then you can start to set up your automatic pet feeder.
   2. Please long-press press button for one second to check if the food tray rotates properly.
2. Unlocking The Screen: If no activity takes place in 30 seconds, the unit will shut down and enter standby mode. Press the and button at the same time for 1 second to unlock the screen and follow the instructions below to manage the settings.
3. Set CurrentTime:
   1. Press the button, and the hour digits will flash.
   2. Press and “Q ” button to find the current hour and press again to save.
   3. Once an hour is saved, the minute digits will flash.
   4. Press and button to find the current minute and press again to save and enter First Meal Settings.
4. Set First Meal Time:
   1. When the digits are flashing, repeat step 1 to set the feeding time.
   2. Press shortly to save the schedule and go to the second meal settings. (If only 2 or 3 meals needed, please long-press press button to return to the current time page; your feeding schedules will be automatically saved.)
5. Restore Factory Setting:
   1. Press the button, and the hour digits will flash.
   2. Hold and buttons at the same time to clean all programmed meals and settings.

Important Safety Information

Proper safety warning information can avoid potential danger for people and pets. Please read the safety information carefully.

1. Do not place anything on top of the feeder.
2. The feeder is suitable for operation by users over 12 years old.
3. Suitable for both wet and dry food.
4. Support both the power supply and the Micro USB Interface power supply.
5. The feeder body is forbidden to dip in, or it will cause the feeder to break.
6. When the low voltage indicator is solid, please replace the battery in time. If you do not use the battery for a long time, please take it out to avoid battery corrosion.
7. When both plug in and install the battery, the power supply is in priority.

FOR MORE MANUALS BY PETWANT, VISIT MANUALSLIBRARYY

Petwant F6 Six-Meals Automatic Pet Feeder-FAQs