Petwant PW-109 2L Water Fountain
Pet Fountain
Before we start: Care instructions
To keep providing fresh, clean water for your pet, remember these three simple tasks:
- Refill often. Keep the water level up. The pump is designed to work in at least one inch of water. The pump can fail if it runs dry.
- Clean your pump and your fountain. Take your pump and fountain apart to clean with soap and water every two to four weeks. Be careful not to get
- Replace your filters. Replace the carbon filter every four weeks when you clean your fountain. Replace the foam filter every two months.
What you have：
Setup instructions
- Schematic diagram for pump installation
- Install the filter:
- Install the lid & flower
Use instructions
Place the fountain where your pet will use it. Fill the vessel with water, leaving a half-inch of space between the water and the rim. Make sure your hands, the cord, and the power adaptor are dry. Keep health and happiness flowing!
To extend product life, please clean the pump every 2 weeks.
- Remove the Pump Cover
- Remove the Impeller cap by placing your fingernail underneath the small lip located.
- Remove the Impeller and clean the parts with soap and water.
Cautions
- Be sure to shut down and disconnect the power supply for safety when the equipment is not in use.
- This product is for indoor use only.
- The power adapter and wire plug must not be flooded during cleaning.
- This product is not allowed to run without water (can be ignored for models with the function of automatically shutting off without water).
- Please disconnect the power supply before maintaining and cleaning the machine.
For More Manuals By Petwant, Visit ManualsLibraryy.
Petwant PW-109 2L Water Fountain-FAQs
Q1. How do I turn the device on and off?
Press the main power button once to switch it on. Hold the button for a few seconds to turn it off.
Q2. How can I reset the product to factory settings?
Use the reset button or menu option described in the manual. This clears custom settings and restores defaults.
Q3. What safety precautions should I follow?
Always use the device on a flat, stable surface, keep it dry, and avoid blocking ventilation openings.
Q4. How do I clean and maintain the device?
Unplug it before cleaning. Use a soft, damp cloth and avoid harsh chemicals.
Q5. What should I do if the product stops working?
Check the power supply, cables, or batteries. If issues persist, consult troubleshooting in the manual or contact support.
Q7. How do I know if the device is operating correctly?
Indicator lights, sound alerts, or display messages will confirm proper operation.
Q8. Where can I find warranty and customer support details?
Warranty information and contact details are usually in the last section of the manual or on the brand’s website.