Polaroid Deluxe Wireless Speaker
In the Box
Location of Controls
- [POWER] Switch
- Charging LED Indicator
- Bluetooth LED Indicator
- Volume Knob
- 3.5mm Auxiliary Input Jack
Pairing the Speaker
- Turn the speaker ON by moving the [POWER] switch to the ON position. A tone will be heard indicating the speaker has power and the Bluetooth LED indicator will quickly flash BLUE.
- Set your mobile device to search for Bluetooth devices. When it appears, select PBT3032 from the list of found devices.
- Once successfully paired, the tone will be heard and the Bluetooth LED indicator will slowly flash BLUE.
For iOS or Android
- Go to SETTINGS> BLUETOOTH (Make sure 8/uetooth is turned ON)
Using the Speaker
Powering ON/OFF
- Flip the [POWER] switch to the ON position to turn the speaker ON.
- Flip the [POWER] switch to the OFF position to turn the speaker OFF
Volume Adjustment
- Turn the Volume knob on the top panel to adjust the volume.
Playing Music
To enjoy music wirelessly on your speaker, make sure you are paired to a Bluetooth-Bnabled device. Once paired, you can control media playback on your paired device and can add just volume on the speaker or with your paired device. If you are pairing the device for the first time, please consult the Pairing the Speaker part of this user guide.
Charging the Speaker
Attach the small connector of the supplied micro-USB charging cable to the DC 5V charging port on the back of the speaker. Attach the large connector to the USB port on a computer, a USB charging device, or a 5V USB adapter (not included, and plug it into a wall socket. The charging LED indicator will turn RED while charging and will turn off when fully charged.
Using the Auxiliary Input
Attach one connector of the supplied 3.5mm auxiliary cable to the input jack. Attach the other connector to the headphone jack on your media-playing device. Once plugged in, the speaker will automatically switch to auxiliary input mode. Media playback is controlled through your connected device.
Legal Information
READ THIS CAREFULLY AND SAVE FOR FUTURE REFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
WARNING Li-ion Battery Inside
This product is fitted with a Li-ion battery. Do not damage, open, or dismantle the battery, and do not use it in damp and/or corrosive conditions. Use only compatible chargers. Never dispose of batteries in a fire, and never expose them to high temperatures. Do not expose the product to temperatures exceeding 60°C (140°F).
The crossed-out garbage bin symbol means that you must not dispose of this product together with unsorted household waste.
Rain/Moisture Warning
- Do not expose the unit to extreme temperatures (heat or cold), open flames, humid conditions, or wet conditions.
- Do not submerge in water.
- Do not open this product or attempt to repair the unit yourself should it not be working.
Warranty Information
This product as supplied and distributed new by AIT, Inc. (“AIT”) to the original consumer purchaser is warranted by AIT against defects in material and workmanship for one year from your date of purchase (“Warranty”). In the unlikely event that this product is defective, or does not perform properly, you may within one year from your original date of purchase return it to the authorized service center for repair or exchange.
TO OBTAIN WARRANTY SERVICE:
- Go to our website portal to receive an SRO number.
- Provide proof of the date of purchase within the package (dated bill of sale).
- Prepay all shipping costs to the authorized service center, and remember to insure your return.
- Include a return shipping address (no PO Boxes), a telephone contact number, and the defective unit within the package.
- Describe the defect or reason you are returning the product.
Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service center determines this product is defective. Products received damaged as a result of shipping, will require you to file a claim with the carrier. The shipping address of the authorized service center is: AIT,lnc. Customer Service Dept. 36 c/o Southern Telecom 400 Kennedy Drive
Sayreville, NJ 08872
Click on Product Support
IN NO EVENT WILL AIT, ITS MANUFACTURERS, DISTRIBUTORS OR PLR IP HOLDINGS, LLC BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) RELATED TO THIS PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY.
For more manuals by Polaroid, visit ManualsLibraryy
Polaroid Deluxe Wireless Speaker-FAQs
How do I know if my Polaroid speaker is charging?
The speaker uses different light indicators:
1. Flashing red – Low battery
2. Flashing green – Charging
3. Flashing white – Pairing mode
How do I turn off my Polaroid speaker?
Press and hold the power button for about half a second to turn off the speaker.
How do I know if my speaker is in pairing mode?
Most speakers will blink an LED light or make a sound when in pairing mode. If your speaker doesn’t enter pairing mode, check the user manual for specific instructions.
How do I turn on Bluetooth on my Polaroid speaker?
Make sure the speaker is powered on and charged. Press and hold the Bluetooth button (+ button near the lens) until it blinks blue, indicating that Bluetooth is enabled and ready to pair.
How do I know when my Polaroid speaker is fully charged?
While charging, the battery indicator LED blinks. Once fully charged, the LED turns off. Charging through a wall socket typically takes about 2 hours.
How do I check my speaker’s battery level?
Many Bluetooth speakers use indicator lights:
1. Green light – Full charge
2. Red light – Low battery
Check your user manual for specific battery level indicators on your speaker model.
What does a blue light mean on a Bluetooth speaker?
1. Flashing blue – Power ON, waiting for Bluetooth connection
2. Solid blue – Power ON, connected to a Bluetooth device
What is pairing mode on a Bluetooth speaker?
Pairing mode allows two Bluetooth devices to establish a wireless connection. It must be activated before the devices can be linked.