Royal Sovereign APL-330U Hot-Cold 4-Roller Pouch Laminator
Safety instructions
The safety recommendations outlined in this section should be read and understood before operating this machine. When
using this machine, follow these basic safety precautions to reduce the risk of fire, electric shock, or injury. Keep this information for future reference.
- To prevent the possibility of a fire or injury, do not allow foreign articles inside the machine.
- Do not attempt to laminate items that exceed the total recommended material thickness.
- Do not insert the pouch film with the back end first. (Front of film: sealed side, Back of film: open side.) This may cause the pouch to jam the rollers.
- To prevent the possibility of electric shock, do not immerse the laminator in water or permit liquids inside the machine.
- Because the laminator creates heat, keep it out of the reach of children.
- Do not cut pouches before inserting them into the laminator. This will cause the laminator to jam.
- Do not laminate leaves, flowers, clothes, etc.
- If the room temperature is low (under 64˚F), the ready light may take longer to come on.
- When unplugging the power plug, grip the plug to pull it out. Pulling the cord may result in electric shock, fire, or
damage to the machine. - Do not use the machine if the cord is damaged. This may result in electric shock, fire, or other hazards.
- Do not place objects on the power cord, and do not bend it excessively. This may result in electric shock, fire, or other
hazards. - When not using the machine for long periods of time, unplug the power cord from the outlet.
BOX CONTENTS
Laminator and pouch film
PARTS
FEATURES
- Four Roller System: The four roller system provides precise heat and pressure to ensure high-quality lamination.
- Hot and Cold Lamination: The laminator can easily be adjusted to handle both hot and cold lamination pouch film.
- Temperature Control: Individual settings for film thicknesses ranging from 3 to 7 mil.
- Reverse Functions: The machine features both manual and automatic reverse functions.
OPERATION
Hot Lamination
[Before laminating important or unique documents, always test a pouch through the laminator using a similar document.]
- Place the machine on a flat, sturdy surface and press the power button to turn on the machine.
- The machine is preset to the 3mil setting. To change the setting, press the temperature control button. The machine will take approximately 4 minutes to warm up. When the proper temperature is reached, the blinking light will glow steadily.
- Place the item to be laminated into the laminating pouch.
- Insert the pouch film into the front opening of the laminator. Make sure to place the sealed end of the pouch film in first. All-sized pouches should be placed in the center of the front opening to pass through the sensor.
- The document or photo will then exit out the back of the machine.
- If the item is not completely laminated, repeat step 4.
Cold Lamination
- Place the machine on a flat, sturdy surface and press the power button to turn on the machine.
- Press the temperature setting button until the Cold lamination setting is lit. If the machine was previously used in hot
mode, allow approximately 40 minutes to cool down. When the proper temperature is reached, the light will glow steadily. - Place the document to be laminated on the non-adhesive side of the cold film with the document face down, sealed end first.
- Insert the document to be laminated into the front opening of the machine.
- Remove the paper liner from the cold film slowly while the document is being inserted into the machine.
- The document or photo will exit out the back of the machine.
Troubleshooting
If you are still having complications, please contact Royal Sovereign’s Service Center at 1-800-397-1025
SPECIFICATIONS
FOR MORE MANUALS BY BLOGS, VISIT MANUALSLIBRARYY
Royal Sovereign APL-330U Hot-Cold 4-Roller Pouch Laminator-FAQs
How do I use the Royal Sovereign APL-330U laminator?
Plug in the laminator, select “Hot” or “Cold” mode, and wait for the ready light. Insert the document into a laminating pouch, sealed edge first, and feed it gently into the machine.
What’s the difference between Hot and Cold lamination modes?
The Hot mode uses heat to seal thermal pouches, while the Cold mode is for self-adhesive pouches — ideal for temperature-sensitive documents like photos or inkjet prints.
How long does the APL-330U take to warm up?
The laminator typically takes 3 to 5 minutes to reach the correct temperature. The “Ready” indicator light will signal when it’s ready to use.
What pouch thickness can this laminator handle?
It supports pouches ranging from 3 mil to 10 mil thick, giving flexibility for both light and heavy-duty laminating tasks.
How do I clear a jam in the APL-330U laminator?
If a pouch jams, turn off the power and use the reverse function to slowly remove the jammed document. Avoid pulling it forcefully to prevent damage to the rollers.
Can I laminate photos or ID cards with this machine?
Yes, you can laminate photos, ID cards, certificates, and other paper materials. For best results, use high-quality laminating pouches designed for thermal use.
How should I maintain my Royal Sovereign laminator?
Regularly clean the rollers using a cleaning sheet after several uses. Ensure the laminator is cool and unplugged before cleaning the exterior with a soft, dry cloth.
Is it safe to leave the laminator on when not in use?
No, always switch off and unplug the laminator when not in use. This prevents overheating and extends the device’s lifespan.