Skullcandy Dime 3 In-Ear True Wireless Earbuds User Manual

Skullcandy Dime 3 In-Ear True Wireless Earbuds

Scan to get started
Warranty information at: skullcandy.com/warranty

Auto Power-On/Off

• Auto On – Remove buds from Case
• Auto Off – Place buds into Case

Manual Power – On

• Off Mode Either bud

Manual Power – Off

• On Mode Both earbuds

Manual Pairing Mode

• On Mode Either bud

Pair New Device

• Voice Prompt “Ready to Pair” Available Device “Dime 3”

Play/Pause Answer Call

• While On Either Bud

Volume Up

• Either Earbud

Volume Down

• Either Earbud

Stay-Ware Mode On/Off

• Either Earbud

Activate Voice Assistant

• Left Earbud or Right Earbud

EQ Switch

• On Mode
• Connected

Re-Sync Earbuds

Both Earbuds

• While On
• Bluetooth Disconnected

Reset the Paired Device List

Both Earbuds

• While On
• Bluetooth Disconnected

Charge Earbuds

• Earbud LEDs turn RED to indicate charging.

Charge the Case

• LED Pulsing RED – 0%-25% case charge
• LED Pulsing Yellow – 26%-75% case charge
• LED Solid GREEN – 76%- 100% case charge

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

(1) this device may not cause harmful interference
(2) This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

 ISED Compliance Statement

This device contains license-exempt transmitters)/receivers) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s).

Operation is subject to the following two conditions

(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

FCC SAR statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The end user must follow the specific operating instructions to satisfy RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the head.

ISED SAR Compliance Statement

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. The end user must follow the specific operating instructions to satisfy RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the head.

1-YEAR GLOBAL WARRANTY

EN Skullcandy products are backed by a 1-year warranty. If it doesn’t work the way we promised, we’ll make it right. For claims, questions, or Terms & Conditions

• U.S. & Canada only: visit Skullcandy.com/warranty or call 1-888-MYSKULL
• All other countries: visit Skullcandy.com/support/international-support Many electrical items can be repaired or recycled, saving natural resources and the environment. If you do not recycle, electrical equipment will end up in landfills where hazardous substances will leak out and cause soil and water contamination – harming wildlife and also human health. To remind you that old electrical equipment can be recycled, it is now marked with a crossed-out wheeled bin symbol. Please do not throw any electrical equipment (including those marked with the crossed-out wheeled bin symbol) in your bin.
• Many Local Authorities will have containers that collect batteries for recycling. Public buildings and your workplace may also have containers. If you do not recycle, batteries will end up in landfills where hazardous substances will leak out and cause soil and water contamination – harming wildlife and also human health. Batteries containing hazardous materials such as mercury (Hg), cadmium (Cd) or lead (Pb) are marked with their chemical symbols as well. This symbol means that according to local laws and regulations, the battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities or return to the purchase location for recycling or disposal

LIMITED WARRANTY- FOR SALES IN AUSTRALIA

• AUS – Limited warranty for sales in Australia against all defects for 1 year from www.9.candy.com. or Contact waran@kulcandy.com.fu. Your benefits under this Skullcandy warranty are in addition to your other rights and remedies under a law in relation to this product. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

For more manuals by Skullcandy, visit ManualsLibraryy

Skullcandy Dime 3 In-Ear True Wireless Earbuds-FAQs