Somic STINCOO ZM-HPS700WD Wireless Gaming Headset
Connecting the microphone
Warning:
It is forbidden to insert the microphone into the AUX interface, which will cause the headset to fail to turn on!
Working Temperature: 0°C- 45°C(‡3°C)
Headset FCC ID: 2A3K8ZM-HPS700W
Dongle FCC ID: 2A3K8ZM-HPS700WD
Headset Charging
- When the headset is charged through USB charging cable, the indicator light will glow solid red. When the headset is fully charged, the indicator light will glow solid green.
- If the power of the headset is less than 10%, the indicator light will flash red. Please charge in time.
Headphones-automatic connection instructions
- Insert the USB receiver into the USB port of the computer/host, the blue indicator of the USB receiver flashes;
- Press and hold the power button of the headset for 3 seconds, and release the headset when the light is on, and the power on is successful;
- The USB receiver automatically connects to the headset. When the blue light of the USB receiver is always on, the connection is successful;
Note: boot failed, please try again after charging.
Headphones-manual connection
When the headset fails to connect automatically, you need to connect manually.
- The headset is turned on, the USB receiver is plugged into the computer/host USB port, and the blue light flashes.
- Long press the microphone on/off button for 3 seconds, the blue light of the headset flashes quickly and then release it to enter the forced pairing.
- The blue light of the USB receiver is on and the connection is successful.
Headset Controls
Power on/off
Press the power button for 3 seconds, the headset will power on/off automatically.
Mode switch
Press the mode switch button once to switch the sound mode mode. The color of the headset light represents the corresponding mode.
Colorful: Game mode White: Video mode Blue: Talk mode
Light on/off
Press the light button once to turn the headset light on/off.
Wired mode
Use a 3.5mm audio cable to plug into the headset AUX interface, and the other end into the host.
Note: In wired mode, all buttons are disabled except for adjusting the volume +/-.
Microphone on/off
Press the microphone button once to turn the microphone on/off.
Cautions
- The headset is compatible with Microsoft Windows 7/8/10, Apple Mac OS systems, and can be used on PS4.
- If the headset is used on an unlisted operating system or device, it may not work properly, Please contact after-sales service for solutions.
- If there is no sound in the microphone or headset during use, it may be caused by driver compatibility problems or improper use. Please contact after-sales service for solutions.
- If the headset is damaged during use, for example, the cable is broken, please stop using it and contact after-sales service for solutions.
- If the headset does not respond for a long time, please use a paper clip or other sharp objects to press the reset button for 3 seconds, and the headset can be powered off automatically.
- If you want to know more information, please visit Somic’s official website www.itsomic.com.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Risk of explosion if the battery is replaced by an incorrect type of disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
For more Manuals by Somic, visit ManualsLibraryy
Somic STINCOO ZM-HPS700WD Wireless Gaming Headset-FAQs
How do I connect my Somic headset to my phone?
To connect your headset, plug the 3.5mm headphone cable into the headset and then into your phone’s headphone jack or compatible port.
How can I reset my Somic headset?
If your headset isn’t responding, press and hold both the power button and the CUSTOM button simultaneously while it is charging. This will reset the device.
Which audio jack should I use for my headset?
Most computers have color-coded jacks. Use the green port labeled “Line Out” or “Headphones” for audio. For the microphone, use the pink port or the one with a microphone icon.
Can I use Bluetooth headphones with a PC?
Yes, Bluetooth headphones can connect to most Windows PCs, just like other Bluetooth devices such as keyboards and speakers.
Do I need to charge the JBL Quantum 400 headset?
No, the JBL Quantum 400 doesn’t have a battery. It powers up (including the RGB lighting) when connected via USB to your PC or console.
Are JBL Quantum 360X headphones good for gaming?
Yes, the JBL Quantum 360X offers great value with features like 3D sound, clear audio, and comfortable ear cups—ideal for gamers on a budget.
How do I enable my headset in the sound settings?
Go to the Control Panel > Hardware and Sound > Sound. Under the Playback tab, right-click your headset, select Set as Default Device, and click OK.
Can someone hack into my Bluetooth headphones?
While many devices use Bluetooth encryption, some operate on open frequencies. If not secured, Bluetooth connections can be vulnerable to hacking or data interception.
How do wireless (Bluetooth) headphones work?
Bluetooth headphones use radio signals to wirelessly connect to your device—such as a phone, tablet, or PC—without the need for cables.