Soundcore by Anker Space A40 Wireless Earbuds
SUPPORT
Please visit www.soundcore.com/support for more information.
WEARING
Choose the Ear Tips that fit your ears best and take a fit test in the Soundcore app to ensure you get the best ANC performance.
POWERING ON & PAIRING
Open the charging case, the earbuds will automatically power on and enter Bluetooth pairing mode. Select “Soundcore Space A40” from your device’s Bluetooth list when connecting for the first time.
APP
Download the Soundcore app to enhance your experience (Ambient Sound modes, adaptive noise control, Hear ID Sound, equalizer tuning, custom controls, firmware update, and more).
CHARGING
Fully dry off the earbuds and the USB-C charging port before charging. For wireless charging, position the charging case at the center of your wireless charger.
MULTIPOINT CONNECTION
The earbuds can connect with two devices at the same time so you can switch between them effortlessly. To pair with another device, wear the earbuds, then press and hold the touchpad on both earbuds for 3 seconds simultaneously. Select “Soundcore Space A40” from your device’s Bluetooth list to connect.
MANUAL PAIRING
To manually enter Bluetooth pairing mode, place the earbuds in the charging case and leave the case open. Then press and hold the button on the charging case for 3 seconds until the LED indicators flash white in sequence continuously.
NOISE CANCELLATION
To reduce unwanted ambient noise, select a noise cancellation mode in the Soundcore app.
- Adaptive Mode: Automatically switch to the most suitable noise cancelling equalizer for different user scenarios.
- Manual Mode: Set the level of noise cancellation manually.
LDAC
Use devices powered by Android 8.0 or later to experience LDAC quality sound.
CONTROLS
x2: Tap twice
2s: Tap and hold for 2 seconds
*You can also customize controls in the Soundcore app.
TRANSPARENCY
To stay aware of your surroundings while listening to music, select a transparency mode in the Soundcore app.
- Fully Transparent: Hear all ambient sounds.
- Vocal Mode: Voices stand out more clearly from other ambient sounds.
POWERING OFF
Return the earbuds to the charging case and close the case.
RESET
Place the earbuds in the charging case and leave the case open. Then press and hold the button on the case for 10 seconds until the LED indicators on the case flash white 3 times and then flash in sequence.
SPEC
Specifications are subject to change without notice.
| Input | 5 V 0.65 A |
| Rated output power | 2.2 mW |
| Battery capacity | 53 mAh x 2 (earbuds); 800 mAh (charging case) |
| Charging time | 2 hours |
| Playtime (with ANC mode turned off) | Up to 10 hours (Total 50 hours with the charging case) |
| Playtime (with ANC mode turned on) | Up to 8 hours (Total 40 hours with the charging case) |
| Driver unit | 10 mm dynamic driver |
| Frequency response | 20 Hz – 20 kHz |
| Impedance | 16 Ω |
| Waterproof level (Earbuds) | IPX4 |
| Bluetooth version | 5.2 |
| Bluetooth range | 10 m / 33 ft |
For more manuals by Anker-Soundcore visit, ManualsLibraryy
Soundcore by Anker Space A40 Wireless Earbuds-FAQs
How many devices can connect to Soundcore Space A40?
You can connect up to two Bluetooth devices simultaneously, making it easy to switch between music, calls, and more.
How do I turn on noise cancelling on Soundcore Space A40?
Press the “NC” button to toggle between Noise Cancelling (default), Transparency, and Normal modes. You can also customize the settings in the Soundcore app.
How do I power off the Space A40 earbuds?
Place the earbuds in the charging case and close it. They will also power off automatically after 30 minutes of inactivity, which can be adjusted in the app.
How do I control the volume on Soundcore Space A40?
Adjust the volume through the Soundcore app. If needed, ensure “Soundcore Space A40 Hands-Free” is selected as the output device on your computer.
Are Soundcore Space A40 earbuds waterproof?
Yes, they are IPX4 rated, meaning they can withstand sweat and light rain.
Can I pair different Soundcore speakers?
Stereo pairing is only possible with two identical Soundcore speakers to create separate left and right audio channels.
What is Vocal Mode on Soundcore Space A40?
Vocal Mode is a setting within Transparency Mode, ideal for hearing ambient sounds or having quick conversations without removing the earbuds.
How can I improve the noise cancellation on my Space A40 earbuds?
Ensure a good fit by trying different ear tip sizes, experiment with noise cancellation modes, and test in various environments.
How many microphones does Soundcore Space A40 have?
The earbuds feature six microphones with AI technology for clear calls and high-quality sound.
Does Soundcore Space A40 have wireless charging?
Yes, the charging case supports wireless charging. You can also use the included USB-C cable for charging.
How do I pair Soundcore Space A40?
Hold the power button for 10 seconds to enter pairing mode. Then, go to your device’s Bluetooth settings, find “Soundcore Space A40,” and select it to connect.