SoundCore Life P2I A3991L Wireless Earbuds
SUPPORT
SUPPORTFor FAQs, a detailed user manual, and more information, please visit www.soundcore.com/support
WEARING
WEARINGChoose the EarTips that fit your ears best.
CHARGING
CHARGING- Fully dry off the USB charging port before charging.
- Use a certified USB-C charging cable to prevent any damage.
POWERING ON/OFF
POWERING ON/OFF- Open the charging case, and the earbuds will automatically power on.
- To power off, place the earbuds in the charging case and close it.
PAIRING
PAIRING- Open the charging case, and the earbuds will automatically enter Bluetooth pairing mode.
- Select “Soundcore Life P2i” on your device’s Bluetooth list to connect.
CONTROLS
CONTROLS- x1: Press once
- x2: Press twice
- x3: Press three times
2s: Press and hold for 2 seconds
- x1: Press once
- x2: Press twice
- x3: Press three times
- 2s: Press and hold for 2 seconds
2s: Press and hold for 2 seconds
RESET
RESET- Reset if the earbuds cannot properly pair with each other or with other devices.
- Place the earbuds in the charging case and leave the case open.
- Press and hold the button on the case for 10 seconds until the LED indicator on the charging case flashes red 3 times. This confirms that the reset was successful and your earbuds can be connected normally.
LED LIGHT GUIDE
LED LIGHT GUIDE
Steady white
Steady red
Flashing white
Flashing red
Light off
Steady white
Steady red
Flashing white
Flashing red
Light off
TIPS
TIPSBluetooth Pairing:
- For some smartphones, you may be requested to reconfirm the pairing on a pop-up window after you have selected “Soundcore Life P2i” to pair.
Breaking Bluetooth Connection:
- Turn off your Bluetooth device and turn it on again.
- Remove “Soundcore Life P2i” from your device’s Bluetooth list.
Reset:
- If you try to reset the earbuds, make sure that the earbuds are being charged in the case and leave the case open.
Customer Service
Customer Service18-month limited warranty
Lifetime technical support
Our warranty is in addition to the legal rights consumers have when buying this product.
For customer support email at [email protected]
For More Manuals By SoundCore, Visit ManualsLibraryy.
SoundCore Life P2I A3991L Wireless Earbuds-FAQs
Q1. What modes are available in Soundcore Life P2i?
You can switch between Signature mode (default), Bass Booster mode, and Podcast mode by tapping the right earbud three times quickly.
Q2. How do I switch between EQ modes?
Tap the right earbud three times. A tone confirms each successful switch. This feature works only when using both earbuds in stereo.
Q3. How long does it take to charge the Life P2i?
The earbuds take about 2 hours for a full charge. A quick 10-minute charge can provide playtime if the battery is fully drained.
Q4. Can I use one earbud at a time?
Yes. Remove one earbud from the case to use it while the other stays in the charging case.
Q5. How do I know when my earbuds are fully charged?
The charging case LED will turn solid green when fully charged. Earbud battery levels can also be checked via the Soundcore app.
Q6. Do the Soundcore Life P2i have noise cancellation?
They feature dual microphones with AI noise reduction, providing clear calls, though they do not have active noise cancellation (ANC).
Q7. Can I talk on phone calls with these earbuds?
Yes, the dual-mic system is designed to deliver clear voice quality for phone calls and virtual meetings.
Q8. Are the Soundcore Life P2i waterproof?
Yes, they have IPX5 water resistance, protecting them against sweat and light rain.